Interest in a Super Blue Para 3?
- Haunted House
- Member
- Posts: 280
- Joined: Wed Sep 25, 2019 5:02 pm
Interest in a Super Blue Para 3?
How does an Aogami Super Blue Para 3 sound?
Maybe with some dark navy or denim blue g-10 scales? :spyder:
Super blue is probably my favorite knife steel(via handmade Japanese kitchen knives), and Para 3 has become my favorite edc knife. I would do bad things for a Super Blue Para 3...
Am I alone on this?
I know Super Blue isn’t “cool” or in-fashion these days with all the super steels, but man... there’s just something special about it. Almost like it has soul. And it gets so sharp so easily, it’s almost spooky.
Of all the Delica exclusives, the Super Blue Delica is the hardest to find & usually sells for about $250 on the resale market (if you can find one), only bested by the St Nicks Delica in resale price.
I’d have to imagine a SB Para 3 would be pretty well received?
What do you guys think? Would anyone else be interested in one?
Maybe with some dark navy or denim blue g-10 scales? :spyder:
Super blue is probably my favorite knife steel(via handmade Japanese kitchen knives), and Para 3 has become my favorite edc knife. I would do bad things for a Super Blue Para 3...
Am I alone on this?
I know Super Blue isn’t “cool” or in-fashion these days with all the super steels, but man... there’s just something special about it. Almost like it has soul. And it gets so sharp so easily, it’s almost spooky.
Of all the Delica exclusives, the Super Blue Delica is the hardest to find & usually sells for about $250 on the resale market (if you can find one), only bested by the St Nicks Delica in resale price.
I’d have to imagine a SB Para 3 would be pretty well received?
What do you guys think? Would anyone else be interested in one?
Re: Interest in a Super Blue Para 3?
Yes, I'd be interested, but only if they can make them with straight blades.
All 3 of my samples of Superblue have had blades warped towards the non-clip side.
Also, all Superblue Caly Jr examples I've seen for sale on BF that included a photo of the centering looked to have the same warpage.
All 3 of my samples of Superblue have had blades warped towards the non-clip side.
Also, all Superblue Caly Jr examples I've seen for sale on BF that included a photo of the centering looked to have the same warpage.
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
Re: Interest in a Super Blue Para 3?
Yes please! I would love one. Maybe even a lightweight sprint, and I like the idea of denim blue. Any blue or blue/gray like on the calypso jr sprint. DLC coated would only interest me further, and makes sense for the steel. I always worry about finer prints on my Superblue and other carbon steels. DLC coating helps me calm down a little, haha.
My ZDP-189 caly jr also has warping :/
My ZDP-189 caly jr also has warping :/
Re: Interest in a Super Blue Para 3?
Move the clip to the other side for a while and it should even out. :D
I'm a big fan of the Para 3 LW, so that would be my preference. Perhaps a Smurf blue would be fitting. Although, denim micarta would be fantastic.
Now I just have to sell a kidney to finance this beast...
Re: Interest in a Super Blue Para 3?
I may be wrong, but I thought that Japan wouldn’t export that steel, so the knife would have to be made in Japan.
Likes FRN
:spyder: MEMBER OF THE CRUWEAR NATION :spyder:
:spyder: MEMBER OF THE CRUWEAR NATION :spyder:
- bearfacedkiller
- Member
- Posts: 11411
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Interest in a Super Blue Para 3?
It took quite a while for the 52100 Para3 to sell out. Plus, Japan isn’t going to export super blue. I would try to find one in 52100. That may be as close as you will get. The name is not as cool but the performance is somewhat comparable in relation to the full spectrum of steels available today.
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Interest in a Super Blue Para 3?
I almost wish it worked like that. Hahaha
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
Re: Interest in a Super Blue Para 3?
I would be down for one. I have yet to experience super blue steel so it would be nice to get super blue back in the folder mix for those of us wanting to get their hands on the steel
Every Steel Has Its Appeal :cool:
A.S.O.K.A Edge on Youtube
A.S.O.K.A Edge on Youtube
Re: Interest in a Super Blue Para 3?
I also really like Super Blue steel, have in my collection Delica, Endura and Stretch.
Not certain on the Para 3,, blade stock is rather thick for great slicing.
I would rather have another run of the original three with laminated Super Blue.
Most likely never happen since they were "sprint" runs and not exclusives.
Regards,
FK
Not certain on the Para 3,, blade stock is rather thick for great slicing.
I would rather have another run of the original three with laminated Super Blue.
Most likely never happen since they were "sprint" runs and not exclusives.
Regards,
FK
- Haunted House
- Member
- Posts: 280
- Joined: Wed Sep 25, 2019 5:02 pm
Re: Interest in a Super Blue Para 3?
I have the 52100 para 3 (along with a cru-wear Para 3 as well). The 52100 is by far my favorite. (I’ve actually been considering buying another, along with the partially serrated model as well).bearfacedkiller wrote: ↑Tue Oct 15, 2019 5:14 amIt took quite a while for the 52100 Para3 to sell out. Plus, Japan isn’t going to export super blue. I would try to find one in 52100. That may be as close as you will get. The name is not as cool but the performance is somewhat comparable in relation to the full spectrum of steels available today.
It’s my first time using 52100 and I agree, it does feel & sharpen similar.
I get that these aren’t the most practical steels in a folder, but they just have that certain “je ne sais quoi“.
I didn’t know about super blue not being able to export out of Japan. I guess that puts a damper on things.
Re: Interest in a Super Blue Para 3?
I'd be very interested in a Golden made, unclad, Para3 Lightweight in Superblue :D
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-
- Member
- Posts: 475
- Joined: Tue Mar 13, 2018 4:18 pm
Re: Interest in a Super Blue Para 3?
Definite yes
Re: Interest in a Super Blue Para 3?
The 52100 version is close enough in performance. Grab one of them.
Re: Interest in a Super Blue Para 3?
Yes for me