Shaman Cru-Wear Sprint Run release ?

Discuss Spyderco's products and history.
Monty
Member
Posts: 151
Joined: Tue Jun 18, 2019 11:49 am

Re: Shaman Cru-Wear Sprint Run release ?

Postby Monty » Fri Oct 04, 2019 11:59 pm

ZrowsN1s wrote:
Fri Oct 04, 2019 11:23 pm
I reeeely want this one. But Ive got four Shamans now, need to stop.
Do you have a serrated version? I never hear anything about these except from collectors. I suppose they get overshadowed a bit by the Caribbean serrated.

SLOSpyder
Member
Posts: 78
Joined: Fri May 31, 2019 12:20 pm

Re: Shaman Cru-Wear Sprint Run release ?

Postby SLOSpyder » Sat Oct 05, 2019 4:38 am

.
Last edited by SLOSpyder on Sat Oct 12, 2019 10:06 pm, edited 1 time in total.

User avatar
gunmike1
Member
Posts: 788
Joined: Fri Mar 03, 2006 9:14 am

Re: Shaman Cru-Wear Sprint Run release ?

Postby gunmike1 » Sat Oct 05, 2019 5:27 am

I’m hoping I manage to get one of these. I’ve been waiting to try out the Shaman, and I like Cruwear a lot. It balances ease of sharpening, toughness, and wear resistance well. I probably would have got a Shaman earlier, but I’ve been carrying my Native Chief since it came out. The contoured scales look very ergonomic, and I have high hopes for that. The blade is thicker than I like and I’ll probably have mine reground thinner if I get one.

User avatar
jdw
Member
Posts: 863
Joined: Thu Aug 25, 2016 6:10 pm
Location: Red Dirt

Re: Shaman Cru-Wear Sprint Run release ?

Postby jdw » Sat Oct 05, 2019 5:31 am

I am hoping to get one as well. I guess that I will spend a good part of the weekend checking my email for alert notices and the good folks on this board for where these start dropping. This will be my first Shaman and I am pretty excited to check it out. Good luck to all!
"Any fool can make something complicated. It takes a genius to make it simple."
-- Woody Guthrie

User avatar
curlyhairedboy
Member
Posts: 1501
Joined: Fri Mar 18, 2016 11:01 am
Location: Southern New England

Re: Shaman Cru-Wear Sprint Run release ?

Postby curlyhairedboy » Sat Oct 05, 2019 7:50 am

sal wrote:
Fri Oct 04, 2019 8:51 pm
You asked for it. :D

sal
Thank you for making it happen! I have 2 on order :D
Spyderco Collection: Always in Flux...
Southard, PITS, Shaman, CF S90v Shaman, Ikuchi, Amalgam, Spyderhawk H1, Squarehead LW, Smallfly G10, UKPK, Calendar Para 3 LW, CRUCARTA Shaman, Hawkbill Dragonfly 2 H1
40th Anniversary Native
Would like to own again: Lil Native, Sheepsfoot Caribbean
Wishlist: Kapara, Lil Chokwe, Tanto PM2, Sage 5 LW, Shaman Sprints!

User avatar
ZrowsN1s
Member
Posts: 4850
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: Shaman Cru-Wear Sprint Run release ?

Postby ZrowsN1s » Sat Oct 05, 2019 2:00 pm

Monty wrote:
Fri Oct 04, 2019 11:59 pm
ZrowsN1s wrote:
Fri Oct 04, 2019 11:23 pm
I reeeely want this one. But Ive got four Shamans now, need to stop.
Do you have a serrated version? I never hear anything about these except from collectors. I suppose they get overshadowed a bit by the Caribbean serrated.
No I do not, but I imagine it would be pretty cool. I've got the PE S30V, Jade M4, S90V CF, and Red and Black 4V Shaman. Couldn't bring myself to pick and choose between all of the upcoming, so I went with a first come first buy philosophy :D Hard to resist Cruwear and Rex45 but I must.
Carrying 3 knives is perfectly normal :D
-Matt

User avatar
attila
Member
Posts: 1074
Joined: Fri Apr 29, 2016 9:20 am
Location: Maryland

Re: Shaman Cru-Wear Sprint Run release ?

Postby attila » Sat Oct 05, 2019 2:51 pm

I missed out on the M4 and 4V, so I'm glad I got an order placed with the mother ship for the Cru-carta Shaman this afternoon.

I look forward to the Rex 45 Rosewood version as well. Hopefully, it's a sprint, not an exclusive.
Own: VG-10 Delica, Old S30V Native, modified Breeden Rescue, VG-10 Delica, HAP40 Endura, ZDP-189 Dragonfly, S110V Manix 2 LW,Pakkawood Delica, Cruwear Para 3, SE H1 Dragonfly, M4 Manix 2, HAP40 Caly 3, smooth G10 S90V Native, K390 Urban, Pakkawood Dragonfly, smooth G10 Cruwear PM2, SE Pacific Salt, HAP40 Jazzlica, Blurple Native, P.I.T.S., DLC Manix 2, REX 45 PM2, REX 45 Para 3, XHP Manix 2 LW, Superblue Caly 3, DLT 20CV PM2, Rhino, SB Calypso Jr., B70P, PMA11, K03, G10 ZDP-189 Stretch 2, Kapara, REX 45 Military, 154CM Manix 2 LW, KW 204p PM2, Swick, Supergold Delica, back lock Lil'Native, AEB-L Urban, HAP40 Stretch, smooth G10 Cruwear Manix 2, Cruwear Military, M390 PM2, Cruwear Delica, CPM 4V Lil'Native, Mantra 2, Cruwear & Micarta Shaman, M390 Para 3 LW, M390 Manix 2

Waiting for: Swick 5, and something purple
.

User avatar
Mattysc42
Member
Posts: 165
Joined: Tue Aug 14, 2018 4:58 pm

Re: Shaman Cru-Wear Sprint Run release ?

Postby Mattysc42 » Sat Oct 05, 2019 6:55 pm

I decided on the k390 pm2 over the crucarta shaman. K390 in just a much more useful steel for me, and I already have the m4 shaman. Not being a fan of micarta certainly helped this decision though :p .
Everyone is crazy in their own special ways. Good thing too! The world wouldn’t be nearly as interesting otherwise. ;)

Top 5 knives I’ve owned: Caribbean Leaf, Shaman, Manix XL, ZDP-189/CF Caly 3.5, Native LW.
Top 5 steels I’ve owned: LC200N, MAXAMET, CPM S90V, ZDP-189, CPM M4.
Top 5 steels I want: CPM 20CV, K390, CPM 4V, VANAX, REX 45.

User avatar
wrdwrght
Member
Posts: 2819
Joined: Tue Mar 01, 2011 9:35 am
Location: New Hampshire

Re: Shaman Cru-Wear Sprint Run release ?

Postby wrdwrght » Sat Oct 05, 2019 7:42 pm

attila wrote:
Sat Oct 05, 2019 2:51 pm
so I'm glad I got an order placed with the mother ship for the Cru-carta Shaman this afternoon.
The mothership? SFO?
Marc <— a mere data-point

JUST ARRIVED: “Crucarta” Shaman sprint; K390 PM2 exclusive. ON RADAR: Maxamet PM2; Lil’ Native slipjoint; Siren. IN DREAMS: V4E Military2 stop-lock; 4V Native Chief; Slysz Swayback; Anso Rock Lobster; Nishijin “R”; C27 serrated Jess Horn.

User avatar
attila
Member
Posts: 1074
Joined: Fri Apr 29, 2016 9:20 am
Location: Maryland

Re: Shaman Cru-Wear Sprint Run release ?

Postby attila » Sat Oct 05, 2019 8:02 pm

wrdwrght wrote:
Sat Oct 05, 2019 7:42 pm
attila wrote:
Sat Oct 05, 2019 2:51 pm
so I'm glad I got an order placed with the mother ship for the Cru-carta Shaman this afternoon.
The mothership? SFO?
Yup! :D

SLOSpyder
Member
Posts: 78
Joined: Fri May 31, 2019 12:20 pm

Re: Shaman Cru-Wear Sprint Run release ?

Postby SLOSpyder » Sat Oct 05, 2019 8:59 pm

NM.
Last edited by SLOSpyder on Sat Oct 05, 2019 11:14 pm, edited 1 time in total.

User avatar
Tucson Tom
Member
Posts: 1074
Joined: Tue Mar 28, 2017 10:19 pm
Location: Somewhere in Arizona

Re: Shaman Cru-Wear Sprint Run release ?

Postby Tucson Tom » Sat Oct 05, 2019 10:07 pm

ZrowsN1s wrote:
Sat Oct 05, 2019 2:00 pm
Hard to resist Cruwear and Rex45 but I must.
Is something going on with Rex45 that I don't know about ?

User avatar
timlara
Member
Posts: 1379
Joined: Fri Sep 24, 2004 10:33 am
Location: Lakewood, CO

Re: Shaman Cru-Wear Sprint Run release ?

Postby timlara » Sat Oct 05, 2019 10:11 pm

attila wrote:
Sat Oct 05, 2019 2:51 pm
I missed out on the M4 and 4V, so I'm glad I got an order placed with the mother ship for the Cru-carta Shaman this afternoon.

I look forward to the Rex 45 Rosewood version as well. Hopefully, it's a sprint, not an exclusive.
Yep, can confirm SFO has them on display. I was in there today looking for the new shirts, which they *don't* have yet.
Tim

SLOSpyder
Member
Posts: 78
Joined: Fri May 31, 2019 12:20 pm

Re: Shaman Cru-Wear Sprint Run release ?

Postby SLOSpyder » Sat Oct 05, 2019 11:14 pm

.
Last edited by SLOSpyder on Sat Oct 12, 2019 10:07 pm, edited 1 time in total.

Sumdumguy
Member
Posts: 1397
Joined: Sun Dec 03, 2017 3:51 pm

Re: Shaman Cru-Wear Sprint Run release ?

Postby Sumdumguy » Sun Oct 06, 2019 5:15 am

Tucson Tom wrote:
Sat Oct 05, 2019 10:07 pm
ZrowsN1s wrote:
Sat Oct 05, 2019 2:00 pm
Hard to resist Cruwear and Rex45 but I must.
Is something going on with Rex45 that I don't know about ?
Rosewood/Rex45 Shaman should be coming eventually.

User avatar
mb1
Member
Posts: 955
Joined: Tue Sep 23, 2014 11:47 am
Location: Southeast, US

Re: Shaman Cru-Wear Sprint Run release ?

Postby mb1 » Sun Oct 06, 2019 7:49 am

Oof. I really like Rex45. If it was paired with micarta, I could possibly keep my finger off the trigger a while longer.
- Mark

"Don't believe everything you think." -anonymous wise man

TkoK83Spy
Member
Posts: 2632
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Shaman Cru-Wear Sprint Run release ?

Postby TkoK83Spy » Sun Oct 06, 2019 7:53 am

mb1 wrote:
Sun Oct 06, 2019 7:49 am
Oof. I really like Rex45. If it was paired with micarta, I could possibly keep my finger off the trigger a while longer.
Just buy both and swap the scales :cool:

Very interested in seeing this Rosewood model, and the price point. I'll most likely jump on that one. I find myself grabbing a satin and a dlc model of the Golden knives, that one will be my satin Shaman!
Last edited by TkoK83Spy on Sun Oct 06, 2019 8:07 am, edited 1 time in total.
Currently have 17 :spyder: 's in 13 different steels.

-Rick

cycleguy
Member
Posts: 541
Joined: Tue Aug 28, 2018 4:46 pm
Location: Arvada, coloRADo

Re: Shaman Cru-Wear Sprint Run release ?

Postby cycleguy » Sun Oct 06, 2019 8:05 am

When?
So many knives - so little funds!!!

User avatar
mb1
Member
Posts: 955
Joined: Tue Sep 23, 2014 11:47 am
Location: Southeast, US

Re: Shaman Cru-Wear Sprint Run release ?

Postby mb1 » Sun Oct 06, 2019 11:37 am

TkoK83Spy wrote:
Sun Oct 06, 2019 7:53 am
mb1 wrote:
Sun Oct 06, 2019 7:49 am
Oof. I really like Rex45. If it was paired with micarta, I could possibly keep my finger off the trigger a while longer.
Just buy both and swap the scales :cool:

Very interested in seeing this Rosewood model, and the price point. I'll most likely jump on that one. I find myself grabbing a satin and a dlc model of the Golden knives, that one will be my satin Shaman!
I’ll see your 2 and raise you one: 2 sprints, 1 rosewood, sell the scales. ;)

@cycleguy This week. Enroute to dealers now.
- Mark

"Don't believe everything you think." -anonymous wise man

User avatar
ZrowsN1s
Member
Posts: 4850
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: Shaman Cru-Wear Sprint Run release ?

Postby ZrowsN1s » Sun Oct 06, 2019 1:57 pm

Tucson Tom wrote:
Sat Oct 05, 2019 10:07 pm
ZrowsN1s wrote:
Sat Oct 05, 2019 2:00 pm
Hard to resist Cruwear and Rex45 but I must.
Is something going on with Rex45 that I don't know about ?
Rosewood handle and rex45 coming soon.
Carrying 3 knives is perfectly normal :D
-Matt


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Google [Bot], I_like_knives, Majestic-12 [Bot], MSN [Bot], Mushroom, PeaceInOurTime, prndltech, Ratamaque, sabb8pro2 and 27 guests