Endela Hawk?

Discuss Spyderco's products and history.
Catamount123
Member
Posts: 287
Joined: Fri Dec 14, 2018 7:03 pm

Endela Hawk?

Postby Catamount123 » Mon Sep 30, 2019 8:08 am

I’m thinking the Endela handle would be a great platform for a new Spyder hawkbill (FFG please). What say yee?

VG10 is fine with me, to start. Then the LC200N Salt version, of course ;)
I don't get people who only carry one knife :confused: ;)

User avatar
curlyhairedboy
Member
Posts: 2027
Joined: Fri Mar 18, 2016 11:01 am
Location: Southern New England

Re: Endela Hawk?

Postby curlyhairedboy » Mon Sep 30, 2019 8:16 am

I can't wait to handle an endela one of these days
EDC Rotation: PITS, Shaman, CF S90v Shaman, Ikuchi, Amalgam, CruCarta Shaman, Lil Native, Sage 5 LW, 4V Shaman, Watu, Rex 45 Shaman, Rex 45 Lil Native, Caribbean Sheepsfoot CQI, Waterway, Tanto PM2
Always in Pocket: Hawkbill Dragonfly 2 H1
Special and Sentimental: Southard, Smallfly G10, Squarehead LW, Ouroboros, Calendar Para 3 LW, 40th Anniversary Native
Would like to own again: Currently N/A!
Wishlist: CQI Kapara, Shaman Sprints!

JD Spydo
Member
Posts: 18453
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Endela Hawk?

Postby JD Spydo » Mon Sep 30, 2019 8:28 am

Not a bad idea at all. That might even be near perfect in some respects because it would be in the size range of the SUPERHAWK which unfortunately I thought was the best constructed Hawkbill they ever had but didn't give that model any teeth.

Yeah this might be another way to get more people to try out a Hawkbill >> with teeth of course.

User avatar
legOFwhat?
Member
Posts: 1223
Joined: Mon Jul 09, 2018 5:58 am
Location: Kentucky; Earth

Re: Endela Hawk?

Postby legOFwhat? » Mon Sep 30, 2019 8:37 am

JD Spydo wrote:
Mon Sep 30, 2019 8:28 am
Not a bad idea at all. That might even be near perfect in some respects because it would be in the size range of the SUPERHAWK which unfortunately I thought was the best constructed Hawkbill they ever had but didn't give that model any teeth.

Yeah this might be another way to get more people to try out a Hawkbill >> with teeth of course.
This! I'd take VG-10 as well.
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”

JD Spydo
Member
Posts: 18453
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Endela Hawk?

Postby JD Spydo » Mon Sep 30, 2019 8:44 am

legOFwhat? wrote:
Mon Sep 30, 2019 8:37 am
JD Spydo wrote:
Mon Sep 30, 2019 8:28 am
Not a bad idea at all. That might even be near perfect in some respects because it would be in the size range of the SUPERHAWK which unfortunately I thought was the best constructed Hawkbill they ever had but didn't give that model any teeth.

Yeah this might be another way to get more people to try out a Hawkbill >> with teeth of course.
This! I'd take VG-10 as well.
OH sure VG-10 makes a great SE blade steel in Hawkbills>> Reverse S blades too do reasonably well in VG-10. I still love my older Matriarch which was one of the first batches in VG-10.

When it comes to Hawkbills I've yet to see a VG-10, SE Hawkbill ever chip or have any noticeable problems.

User avatar
legOFwhat?
Member
Posts: 1223
Joined: Mon Jul 09, 2018 5:58 am
Location: Kentucky; Earth

Re: Endela Hawk?

Postby legOFwhat? » Mon Sep 30, 2019 8:59 am

JD Spydo wrote:
Mon Sep 30, 2019 8:44 am
OH sure VG-10 makes a great SE blade steel in Hawkbills>> Reverse S blades too do reasonably well in VG-10. I still love my older Matriarch which was one of the first batches in VG-10.

When it comes to Hawkbills I've yet to see a VG-10, SE Hawkbill ever chip or have any noticeable problems.
I've only tried SE in H1 and AUS-8 and not had any issues yet. If there could be any improvement (not that there is any problems) on my Spyderhawk I'd love to try it. A 5+ inch blade would be cool too.
-Larry
Hebrews 13:6 So we may boldly say: “The Lord is my helper; I will not fear. What can man do to me?”

spyderwolf
Member
Posts: 623
Joined: Mon Jul 20, 2015 6:22 am
Location: Romania

Re: Endela Hawk?

Postby spyderwolf » Mon Sep 30, 2019 9:05 am

Yes.And we need more colors,also.A hawkbill Endela in the denim blue of the Delica Kahr would be awesome.
Whenever there is any doubt, there is no doubt.

VashHash
Member
Posts: 3798
Joined: Mon Aug 03, 2009 2:49 pm
Location: Louisiana

Re: Endela Hawk?

Postby VashHash » Mon Sep 30, 2019 9:28 am

JD Spydo wrote:
Mon Sep 30, 2019 8:28 am
Not a bad idea at all. That might even be near perfect in some respects because it would be in the size range of the SUPERHAWK which unfortunately I thought was the best constructed Hawkbill they ever had but didn't give that model any teeth.

Yeah this might be another way to get more people to try out a Hawkbill >> with teeth of course.
I wish it had been offered without a choil and with a PE and SE option. I still have mine and use it occasionally.


As for the endela hawk I'd be up for one. Especially if it would fit a signet ring so I can make my own version of a karahawk.

User avatar
wrdwrght
Member
Posts: 3245
Joined: Tue Mar 01, 2011 9:35 am
Location: New Hampshire

Re: Endela Hawk?

Postby wrdwrght » Mon Sep 30, 2019 9:53 am

So, if a Salt, something between the Tasman and SpyderHawk? I happen to have them and will stand pat, even though I see the Goldilocksian appeal of an Endela Hawk.
Marc <— a mere data-point, not an Influencer.

RECENT ARRIVAL: Siren. ON RADAR: S90V Chief sprint-run; Ulize. IN DREAMS: LC200N Military Model; Lil’ Native slipjoint; 52100 Shaman; Nitro-V Chief; LC200N Massad Ayoob (PE; G10); LC200N Breeden Captain (SE on recurve); Tusk (SE; G10).

#86452020

JD Spydo
Member
Posts: 18453
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Endela Hawk?

Postby JD Spydo » Mon Sep 30, 2019 10:00 am

VashHash wrote:
Mon Sep 30, 2019 9:28 am
JD Spydo wrote:
Mon Sep 30, 2019 8:28 am
Not a bad idea at all. That might even be near perfect in some respects because it would be in the size range of the SUPERHAWK which unfortunately I thought was the best constructed Hawkbill they ever had but didn't give that model any teeth.

Yeah this might be another way to get more people to try out a Hawkbill >> with teeth of course.
I wish it had been offered without a choil and with a PE and SE option. I still have mine and use it occasionally.


As for the endela hawk I'd be up for one. Especially if it would fit a signet ring so I can make my own version of a karahawk.
Had that SUPERHAWK been offered in Spyderedge I do firmly believe we would still have that model in the main Spyderco line up today. Seriously people most collectors and users that I know strictly buy PE Hawkbills as a collector piece. When people want a Hawkbill for hard use they always get a serrated version. I'm willing to bet if they would have introduced the SUPERHAWK in SE it would have been far preferred even over the Harpy which is arguably Spyderco's most popular and best selling Hawkbill since their inception. And I bet that at least 98% of all the Harpy models ever made were Spyderedged units. Case Closed ;)

User avatar
Wartstein
Member
Posts: 5952
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: Endela Hawk?

Postby Wartstein » Mon Sep 30, 2019 10:11 am

Any functional blade (keep it 3mm stock VG 10, make it SE ) in an Endela handle would be great imho, for it (the handle) has such perfect ergos... for me at least.
Top three going by pocket-time: Endura 4 in VG 10/Micarta-scales; Stretch 1 in VG 10; Endura 4 in HAP 40

VashHash
Member
Posts: 3798
Joined: Mon Aug 03, 2009 2:49 pm
Location: Louisiana

Re: Endela Hawk?

Postby VashHash » Mon Sep 30, 2019 11:22 am

JD Spydo wrote:
Mon Sep 30, 2019 10:00 am
VashHash wrote:
Mon Sep 30, 2019 9:28 am
JD Spydo wrote:
Mon Sep 30, 2019 8:28 am
Not a bad idea at all. That might even be near perfect in some respects because it would be in the size range of the SUPERHAWK which unfortunately I thought was the best constructed Hawkbill they ever had but didn't give that model any teeth.

Yeah this might be another way to get more people to try out a Hawkbill >> with teeth of course.
I wish it had been offered without a choil and with a PE and SE option. I still have mine and use it occasionally.


As for the endela hawk I'd be up for one. Especially if it would fit a signet ring so I can make my own version of a karahawk.
Had that SUPERHAWK been offered in Spyderedge I do firmly believe we would still have that model in the main Spyderco line up today. Seriously people most collectors and users that I know strictly buy PE Hawkbills as a collector piece. When people want a Hawkbill for hard use they always get a serrated version. I'm willing to bet if they would have introduced the SUPERHAWK in SE it would have been far preferred even over the Harpy which is arguably Spyderco's most popular and best selling Hawkbill since their inception. And I bet that at least 98% of all the Harpy models ever made were Spyderedged units. Case Closed ;)
I don't know if it would still be in production but I'd definitely have bought 2. I think it was and always will be niche but it's my niche.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: blues, carrot, DTPrime, Elshauno, Google [Bot], mikey177, Red, Sildani, soc_monki, TkoK83Spy and 33 guests