Z-Cut packaging
-
- Member
- Posts: 43
- Joined: Mon Jan 29, 2018 8:51 am
- Location: Minneapolis, MN
Z-Cut packaging
I just got my 2 knives from REC, one plain, the other serrated. The packaging was spare and ecologically sound, each knife enclosed in plastic on a small cardboard card. The plastic is tough, deflecting the blade of my Chaparral like a phaser shield on the Enterprise. I had to trim around the plastic and then find a plane of dissection to lift one segment and remove the knife. This is not a complaint, just tribute to Spyderco for often exceeding expectations. I do like the knives, too.
- JonLeBlanc
- Member
- Posts: 1756
- Joined: Sun May 13, 2018 8:00 am
- Location: Louisiana
Re: Z-Cut packaging
That's cool, apparently that was the last thing we were waiting on for these knives, and I'm pumped that they'll be available to give as gifts for the holidays!
Do you prefer the plain over serrated, or vice versa... Or no preference? (I bet that plain is SHARP lol)
Do you prefer the plain over serrated, or vice versa... Or no preference? (I bet that plain is SHARP lol)
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara
- Doc Dan
- Member
- Posts: 14827
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Z-Cut packaging
I am glad to hear they are finally out.
Edit: I just check all of my usual places and none have them.
Edit: I just check all of my usual places and none have them.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Z-Cut packaging
Bruce Mack wrote: ↑Sat Aug 31, 2019 4:17 pm......The plastic is tough, deflecting the blade of my Chaparral like a phaser shield on the Enterprise.....
" ...deflecting the blade of a CHAPARRAL"..??!!
Must be THREE phaser shields on top of each other... :p :D
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
-
- Member
- Posts: 43
- Joined: Mon Jan 29, 2018 8:51 am
- Location: Minneapolis, MN
Re: Z-Cut packaging
I haven’t used them enough to say much. The blade stock is very thin, promising good slicing. The plain edge is sharp, but I’ll hit it with the Sharpmaker for maximum sharpness before comparing it with the serrated.
Because of its light weight the z-cut feels insubstantial in hand. No concerns about its integrity but just comparing, unfairly, to my folders. It will be good to read a review by someone who cooks and can comment on feel and utility.
Because of its light weight the z-cut feels insubstantial in hand. No concerns about its integrity but just comparing, unfairly, to my folders. It will be good to read a review by someone who cooks and can comment on feel and utility.
Re: Z-Cut packaging
I got my shipping notice today. Glad they're finally coming out.
-
- Member
- Posts: 407
- Joined: Fri Dec 14, 2018 7:03 pm
Re: Z-Cut packaging
Good to hear the packaging is thick. On one of my other spyderco kitchen knives, the knife tried to hack its way out of the box during shipment. The little plastic tip protector had come loose. Good for spyderco giving even the packaging some cqi!
-
- Member
- Posts: 43
- Joined: Mon Jan 29, 2018 8:51 am
- Location: Minneapolis, MN
Re: Z-Cut packaging
My wife has used the Z-Cut knives for chopping vegetables. Because of the handle and blade configuration she says she doesn’t cut herself anymore. That’s big.
Re: Z-Cut packaging
Got mine. They each came wrapped in a towel. They're very flexible.
2 serrated patterns
The packaging is definitely something different. I found the easiest way to open it was from the back. Where the knife handle goes in I just used my thumb to pry it apart. It's not the typical sealed plastic. It snaps together around the knife and the card holds it together
2 serrated patterns
The packaging is definitely something different. I found the easiest way to open it was from the back. Where the knife handle goes in I just used my thumb to pry it apart. It's not the typical sealed plastic. It snaps together around the knife and the card holds it together
-
- Member
- Posts: 734
- Joined: Mon Feb 04, 2019 7:57 pm
Re: Z-Cut packaging
Interesting, I didn't know that the pointed tip and blunt tip have different serrations. The pointed tip looks typical spydie edge with small and large serrations, but the blunt seems uniform with an medium size all across. Has there been a reason given, or are they just trying different patterns?
Re: Z-Cut packaging
Testing the market preferences.
sal
sal
- Doc Dan
- Member
- Posts: 14827
- Joined: Thu Nov 08, 2012 4:25 am
- Location: In a dimension as vast as space and as timeless as infinity.
Re: Z-Cut packaging
I heard through the grape vine that the distributor (TX?/) has not been contacting the major retailers about new Spydercos and that is why they don’t have new releases like this one.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Follow the Christ, the King,
Live pure, speak true, right wrong, follow the King--
Else, wherefore born?" (Tennyson)
NRA Life Member
Spydernation 0050
Re: Z-Cut packaging
i opened mine carefully and found i can use the clamshell as a sheath for storage.
-
- Member
- Posts: 734
- Joined: Mon Feb 04, 2019 7:57 pm
Re: Z-Cut packaging
Interesting. Thanks for the reply. Some folks probably think the spyderedge looks too scary. I'm guessing functionally it works better or the less aggressive looking pattern would've been the only option? It's cool to get insight on how these decisions get made.
Re: Z-Cut packaging
I've been looking forward to these! We've got two in the mail, should be here Monday. I can't wait to put them through their paces as we eat a salad most days. Thanks to Spyderco in continuing innovation! and with the great price I can continue to save for the next drop of the Spydiechef!
Grizz
Grizz
-
- Member
- Posts: 332
- Joined: Sun Feb 03, 2019 8:02 pm
Re: Z-Cut packaging
I get the feeling that the uniform serrations will work better for bread while the serrations we usually see on spydercos will be fantastic on things like tomatoes and such