Community Sharpening Journal
-
- Member
- Posts: 1391
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: Community Sharpening Journal
Yes, that's what I understood you to be saying. I've never seen or measured a CRK with a grind like that. Maybe it happens, but I do not believe it to be normal.
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: Community Sharpening Journal
I can feel the edge thicken up slightly as I go from spine to edge on my Magnacut Sebenza. I’m hoping I’ll be happy with the cutting and edge thickness one I make the angles much more acute. Knowing me I’ll probably want it reground. My drop point measures ~.020” behind a 20 degree per side edge for most of it, but fattens up to .025+ and 25 degrees per side at the top. The tip bevel will look really fat with that geometry, which will make me want the regrind a little more. The Insingo probably doesn’t have such issues with the tip getting fatter, but I’ve never measured one to check.
Re: Community Sharpening Journal
Maybe this weekend I will break out the Ken onion and do a heavy reprofile, gosh 10 degrees from a knife that starts out around 22 degrees as my Digital level reported is a lot mine is currently at 17 degrees and that took quite a while with the TSPROF.
Worse case scenario I Frankenstein the blade and have to wait 6 months before I can buy a new one and send it into Chris Reeve for a replacement blade.
I hope you like your Magnacut if they get the heat treatment correct like Spyderco and Bark River did on my two Magnacut pieces your gonna love it.
Worse case scenario I Frankenstein the blade and have to wait 6 months before I can buy a new one and send it into Chris Reeve for a replacement blade.
I hope you like your Magnacut if they get the heat treatment correct like Spyderco and Bark River did on my two Magnacut pieces your gonna love it.
Those who are wise sharpen their steel to it's chemistry not their beliefs. "BeggarSo"
Re: Community Sharpening Journal
Magnacut at 63-64 RC should be good, assuming they have dialed in the heat treat. We will see. Reprofiling on a TSProf definitely takes way longer than freehand on an extra coarse diamond stone. But obviously if your hands aren’t too steady freehand it can look a lot uglier than you’ll get on the TSProf.
Re: Community Sharpening Journal
I plan on taking my Small 31 Insingo/Magnacut down to 15dps here at some point relatively soon. I'll report back as well.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Josh Crutchley
- Member
- Posts: 1395
- Joined: Wed Sep 30, 2020 2:44 am
- Location: Michigan
Re: Community Sharpening Journal
First sharpening of my M398 Mule on the WSPA. Don't like how the stones can't reach the whole bevel. I also don't really like the WSPA diamond plates, they seem to have quite a few stray grit particles that are too coarse for what they're rated. I saw them on the fine plate when it was new and hoped the would break off during break in. You can actually feel them as your sharpening almost like it's dirty. Not a big deal unless you're trying to get hair whittling edges. Had to finish freehand with Jende 1 micron on leather to get that sharp.
Re: Community Sharpening Journal
Hmm, that's strange. I've sharpened my Mule on the PA with no issues, also done filet knives that are even longer. Did you compensate by where you connected the clamp to the blade and move those rubber bumpers on the sharpening arm?
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Josh Crutchley
- Member
- Posts: 1395
- Joined: Wed Sep 30, 2020 2:44 am
- Location: Michigan
Re: Community Sharpening Journal
The stone holder runs into the nub so I can't sharpen all the way to the plunge.
Re: Community Sharpening Journal
I’m looking to get 4” diamond stones for my work sharp. Having a hard time finding a ok kit. Venev I heard are good. But on gitomatic they have a limited selection. Any suggestions?
para3 lw spy27
Para 2 dlt cruwear
Para 3 maxamet
Manix 2 rec cts204p
Shaman knife joker cruwear
Lil native knife joy s45vn
Pm2 15v
Native 5 lw Magnacut
Knife joy Manix 2 20cv
-
- Member
- Posts: 95
- Joined: Tue Dec 09, 2014 9:38 am
Re: Community Sharpening Journal
Venev Scorpion Series stones are awesome. I'd call contact gritomatic and see when they might be getting more.
Re: Community Sharpening Journal
4" stone holder on gritomatic. I had the aluminium one but it wasn't very good, I ended up buying the 3D printed one (which is cheaper) and it works way better.
As for the venev stones, I'd recommand the Cerberus Dog Series. they even make combo deals. It's just often victim of its success, they restock regularly
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
- Josh Crutchley
- Member
- Posts: 1395
- Joined: Wed Sep 30, 2020 2:44 am
- Location: Michigan
Re: Community Sharpening Journal
All knives where sharpened with the WSPA and stopped with 1 micron diamond on leather. Not the best framing but you'll get the idea.
Mule M398
https://youtu.be/7hfNHP9wo9Y
Maxamet Manix 2
https://youtube.com/shorts/LhqXNIarNLg?feature=share
XHP Chaparral
https://youtube.com/shorts/kxwSlM4GG9s?feature=share
Mule M398
https://youtu.be/7hfNHP9wo9Y
Maxamet Manix 2
https://youtube.com/shorts/LhqXNIarNLg?feature=share
XHP Chaparral
https://youtube.com/shorts/kxwSlM4GG9s?feature=share
Last edited by Josh Crutchley on Thu Feb 16, 2023 9:36 pm, edited 1 time in total.
Re: Community Sharpening Journal
16dps, finished on 400 grit. Gave it a 17.5dps microbevel for a change of pace as well as a few passes on the strop.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Josh Crutchley
- Member
- Posts: 1395
- Joined: Wed Sep 30, 2020 2:44 am
- Location: Michigan
Re: Community Sharpening Journal
I'll be honest, I'm not the most consistent stropper haha. I tried to match the microbevel angle, and this time it seemed to work very well. Edge is coarse, but sticky. That strop in the photo is from KnivesPlus, I just use some green Bark River compound. Nothing super fancy for me there, since I'm not really that great at it, consistently enough.Josh Crutchley wrote: ↑Thu Feb 16, 2023 9:40 pmDo you strop at the microbevel angle or higher? Also what kind of strop do you use?
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
Re: Community Sharpening Journal
Very impressive!Josh Crutchley wrote: ↑Wed Feb 15, 2023 1:37 pmAll knives where sharpened with the WSPA and stopped with 1 micron diamond on leather. Not the best framing but you'll get the idea.
Mule M398
https://youtu.be/7hfNHP9wo9Y
Maxamet Manix 2
https://youtube.com/shorts/LhqXNIarNLg?feature=share
XHP Chaparral
https://youtube.com/shorts/kxwSlM4GG9s?feature=share
- northvanbamboo
- Member
- Posts: 55
- Joined: Thu Jan 09, 2020 4:06 pm
- Location: Victoria, BC 🇨🇦
Re: Community Sharpening Journal
I just touched up two of my favorite carbon blades: Manix2lw in Rex45 and Endela K390
Manix2lw fresh off the stones, no stopping, finished on F1500 diamond stone, scary sharp
Endela finished on uf spyderco stone, 1/2micron diamond paste on leather, not as aggressive and keen as Manix2lw
Manix2lw fresh off the stones, no stopping, finished on F1500 diamond stone, scary sharp
Endela finished on uf spyderco stone, 1/2micron diamond paste on leather, not as aggressive and keen as Manix2lw
Re: Community Sharpening Journal
Have you ever tried Rex45 with a toothy finish? Takes a lot less time, and cuts like like a dream!northvanbamboo wrote: ↑Fri Feb 17, 2023 10:20 amI just touched up two of my favorite carbon blades: Manix2lw in Rex45 and Endela K390
Manix2lw fresh off the stones, no stopping, finished on F1500 diamond stone, scary sharp
Screenshot_20230217-070611_Video Editor.jpg
Endela finished on uf spyderco stone, 1/2micron diamond paste on leather, not as aggressive and keen as Manix2lw
20230217_081910.jpg
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Josh Crutchley
- Member
- Posts: 1395
- Joined: Wed Sep 30, 2020 2:44 am
- Location: Michigan
Re: Community Sharpening Journal
Thanks! I've been trying for awhile, ever since seeing Michael Christy's cutting demos. Then Shawn showed off some 15v zig zagging through a paper towel like it was nothing and that really pushed me to figure it out. The Mule was my cleanest cut but I cut a few things with the other two before trying so I'm sure I could do better.Strauss95 wrote: ↑Fri Feb 17, 2023 9:56 amVery impressive!Josh Crutchley wrote: ↑Wed Feb 15, 2023 1:37 pmAll knives where sharpened with the WSPA and stopped with 1 micron diamond on leather. Not the best framing but you'll get the idea.
Mule M398
https://youtu.be/7hfNHP9wo9Y
Maxamet Manix 2
https://youtube.com/shorts/LhqXNIarNLg?feature=share
XHP Chaparral
https://youtube.com/shorts/kxwSlM4GG9s?feature=share
Re: Community Sharpening Journal
Reading the thread got me curious and I compared my Insingo Inkosi to my 31 with satin finish. Seems the satin finish. Difficult to see the markings but hope it helps some. I find the satin finish is a better slicer.
Measurements are in mm
Measurements are in mm