spyderco/esee collab?

Discuss Spyderco's products and history.
User avatar
standy99
Member
Posts: 530
Joined: Sat Jul 22, 2017 11:07 am
Location: Between Broome and Cairns somewhere

Re: spyderco/esee collab?

Postby standy99 » Thu Aug 08, 2019 6:14 pm

Get a Spyderco Junction before they go ;)
Im a vegetarian as technically cows are made of grass and water.

zhyla
Member
Posts: 1594
Joined: Tue Apr 20, 2010 2:12 pm

Re: spyderco/esee collab?

Postby zhyla » Thu Aug 08, 2019 7:40 pm

ladybug93 wrote:
Thu Aug 08, 2019 4:36 pm
zhyla wrote: Why would two mainstream knife production companies collaborate? ESEE can buy LC200N steel can't they?
wrdwrght wrote:
Thu Aug 08, 2019 3:26 pm
What would either company gain from the other? IMHO, each is THE leader of its own world.
because they would literally be making the knife of my dreams.
That’s why you want that blade, not why they would do such a collaboration. Either company could build that dream knife. Neither would gain anything from partnering. These aren’t car companies.

When LC200N becomes more available to individual makers you can just have someone make you exactly what you want.

User avatar
Doc Dan
Member
Posts: 7970
Joined: Thu Nov 08, 2012 4:25 am
Location: In a dimension as vast as space and as timeless as infinity.

Re: spyderco/esee collab?

Postby Doc Dan » Thu Aug 08, 2019 11:15 pm

I like the Enuff but I don’t like the sheepfoot blade on the salt, which is why I don’t have one. If they make it in lC 200n I hope they will make a drop point or a clip point or a wharncliffe.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)

"Until we meet again, may the good Lord take a liking to you."
(Roy Rogers)


NRA Life Member
Spydernation 0050

ladybug93
Member
Posts: 986
Joined: Tue May 15, 2018 11:20 pm

Re: spyderco/esee collab?

Postby ladybug93 » Thu Aug 08, 2019 11:35 pm

zhyla wrote:
Thu Aug 08, 2019 7:40 pm
ladybug93 wrote:
Thu Aug 08, 2019 4:36 pm
zhyla wrote: Why would two mainstream knife production companies collaborate? ESEE can buy LC200N steel can't they?
wrdwrght wrote:
Thu Aug 08, 2019 3:26 pm
What would either company gain from the other? IMHO, each is THE leader of its own world.
because they would literally be making the knife of my dreams.
That’s why you want that blade, not why they would do such a collaboration. Either company could build that dream knife. Neither would gain anything from partnering. These aren’t car companies.

When LC200N becomes more available to individual makers you can just have someone make you exactly what you want.
i was jokingly implying that the would be interested in providing me with the knife of my dreams.

User avatar
steelcity16
Member
Posts: 3314
Joined: Mon Dec 11, 2017 11:34 am

Re: spyderco/esee collab?

Postby steelcity16 » Thu Aug 08, 2019 11:44 pm

Sign me up for a Spyd-esee Junglas in fully serrated H1! :D
:spyder: CRU-CARTA THEM ALL! :spyder:

User avatar
Enactive
Member
Posts: 716
Joined: Thu Dec 20, 2018 8:19 pm
Location: Wet side of Washington

Re: spyderco/esee collab?

Postby Enactive » Thu Aug 08, 2019 11:58 pm

steelcity16 wrote:
Thu Aug 08, 2019 11:44 pm
Sign me up for a Spyd-esee Junglas in fully serrated H1! :D
For gardening, right!? ;) :D

User avatar
Mattysc42
Member
Posts: 179
Joined: Tue Aug 14, 2018 4:58 pm

Re: spyderco/esee collab?

Postby Mattysc42 » Fri Aug 09, 2019 12:46 am

steelcity16 wrote:
Thu Aug 08, 2019 11:44 pm
Sign me up for a Spyd-esee Junglas in fully serrated H1! :D
You must really hate wood and have a sadistic streak a mile wide to be cruel enough to want to chop a nice, kindhearted tree with that. Count me in :D .
Everyone is crazy in their own special ways. Good thing too! The world wouldn’t be nearly as interesting otherwise. ;)

Top 5 knives I’ve owned: Serrated Caribbean Leaf, Shaman, Manix XL, ZDP-189/CF Caly 3.5, Native LW.
Top 5 steels I’ve owned: LC200N, K390, CPM S90V, M390, CPM M4.
Top 3 steels I want more of: M390 class, A11 class (including K390), serrated LC200N.

User avatar
Pancake
Member
Posts: 450
Joined: Sat Jun 01, 2019 4:52 am

Re: spyderco/esee collab?

Postby Pancake » Fri Aug 09, 2019 2:16 am

Cough: Spyderco Kephart knife : cough
In the pocket: Chaparral FRN, Native Chief, Police 4 K390
On belt: Bow River, Waterway

ladybug93
Member
Posts: 986
Joined: Tue May 15, 2018 11:20 pm

Re: spyderco/esee collab?

Postby ladybug93 » Sat Aug 10, 2019 12:10 am

okay... i officially want a leaf blade spyderco enuff in lc200n. i think that would be even better than what i proposed in my original post. i don’t even care if it’s yellow, although i’d prefer black with dlc.

spyderco, can you make this happen? it would automatically be my favorite edc fixed blade.

ladybug93
Member
Posts: 986
Joined: Tue May 15, 2018 11:20 pm

Re: spyderco/esee collab?

Postby ladybug93 » Sat Aug 10, 2019 12:16 pm

i would also take a clip point.

has the enuff ever been made in a salt variation other than the se sheepsfoot?

User avatar
Ez556
Member
Posts: 301
Joined: Tue Nov 20, 2018 8:16 pm

Re: spyderco/esee collab?

Postby Ez556 » Sun Aug 11, 2019 6:19 am

An LC200N Enuff leaf or clip point would definitely be cool.
Likes FRN
:spyder: MEMBER OF THE CRUWEAR NATION :spyder:
sal wrote:
Sun Aug 04, 2019 7:28 am
But in reality, there is nothing quite like a gun. And it has been said, "The only way to stop a bad guy with a gun is a good guy with a gun".
Sumdumguy wrote:
Tue Oct 08, 2019 4:35 am
Does that complexity decrease the simplicity? Not at all.

User avatar
araneae
Member
Posts: 4738
Joined: Wed Aug 09, 2006 10:10 pm
Location: A lil more south of the Erie shore, Ohio

Re: spyderco/esee collab?

Postby araneae » Sun Aug 11, 2019 7:38 am

zhyla wrote:
Thu Aug 08, 2019 2:46 pm
Why would two mainstream knife production companies collaborate? ESEE can buy LC200N steel can't they?
They have collaborations done with Fox and Kershaw...
So many knives, so few pockets... :)
-Nick

Just got: Ikuchi

The "Spirit" of the design does not come through unless used. -Sal

ladybug93
Member
Posts: 986
Joined: Tue May 15, 2018 11:20 pm

Re: spyderco/esee collab?

Postby ladybug93 » Sat Sep 21, 2019 7:25 pm

ladybug93 wrote:
Sat Aug 10, 2019 12:10 am
okay... i officially want a leaf blade spyderco enuff in lc200n. i think that would be even better than what i proposed in my original post. i don’t even care if it’s yellow, although i’d prefer black with dlc.

spyderco, can you make this happen? it would automatically be my favorite edc fixed blade.
please. :)

User avatar
Evil D
Member
Posts: 20766
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: spyderco/esee collab?

Postby Evil D » Sun Sep 22, 2019 5:13 pm

bearfacedkiller wrote:
Thu Aug 08, 2019 10:49 am
My Izula has an edge so thick that it is fairly useless for me. I very, very much prefer the BK14 over the Izula. I prefer my Street Beat over either one of them.

Couldn't have said it better. I would absolutely love to have a Street Beat handle with a blade shape like the Shaman, leaf shaped with a shallow belly and low tip.

I also went with the BK14 over the Izula. It came down to a bit longer blade, a little less upsweep at the tip and a much thinner blade grind. The coating seems better/smoother too. All that plus a better quality sheath I just couldn't see why anyone would pick the Izula. The Street Beat is just on another level, but the price also reflects that.
SHARPEN IT LIKE YOU LOVE IT, USE IT LIKE YOU HATE IT
~David

ladybug93
Member
Posts: 986
Joined: Tue May 15, 2018 11:20 pm

Re: spyderco/esee collab?

Postby ladybug93 » Sun Sep 22, 2019 6:24 pm

the izula is my favorite small fixed blade. the enuff would likely replace it if it came in lc200n with either the leaf or clip point.

marty_bill_
Member
Posts: 156
Joined: Tue May 24, 2016 7:03 pm
Location: Wyoming

Re: spyderco/esee collab?

Postby marty_bill_ » Sun Sep 22, 2019 7:34 pm

I wish Spyderco made something like the Esee CR2.5. Love it! Perfect neck knife size.

mikey177
Member
Posts: 50
Joined: Sat Aug 17, 2019 12:33 am
Location: Philippines

Re: spyderco/esee collab?

Postby mikey177 » Tue Sep 24, 2019 2:05 am

If they collab on a kitchen knife, they can name it the "Spy-see" :)


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: abiggs, Ankerson, BigGrove, Bloke, crazywednesday, Enactive, Google [Bot], Hoot Gibson, JuPaul, Monty, MSN [Bot], toxophilus and 41 guests