Page 4 of 6
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 7:22 pm
by steelcity16
I'm also going to need some LC200N Jester Salts with Glow in the Dark FRN scales in both PE and SE LC200N! :D
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 7:35 pm
by bdblue
amateur blacksmith wrote: ↑Sat Jul 06, 2019 2:39 am
This is gonna be a popular wish me thinks but I'll have to go with a PM2, 2nd choice Manix 2
I'm with you. I think some of the most popular models should be standard production with the basic stainless steel but also in a salt model and in a model with premium steel which could be M4, S110V 4V or Cruwear, whichever fits the model the best. PM2 would be at the top of this list.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 7:55 pm
by JD Spydo
The more I think about it I believe LC200N would be ideal for the HARPY model. Or if they ever resurrect the MERLIN model that would also be a great steel to use for it as well.
It seems like those Nitrogen based blade steels seem to work well in specialty type models with my tested uses.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 8:34 pm
by James Y
Ideally, I'd love to see several popular models to have permanent options/versions in LC200N. Military, PM2, Para 3, Endura, Police 4, etc. I doubt it will ever happen, though. I really love LC200N.
Jim
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 9:57 pm
by Tdog
I'm loving the LC, hoping we see it in many more of the models. The lightweight Caly 3.5 or police model would do it for me. If there was a lightweight Millie version that would also work. While we're at it, a pe Catcherman would also be nice.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 11:16 pm
by cabfrank
Para 3 Lightweight. Blue, bright green or orange would be nice. Might as well make it full Salt too.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Sun Jul 07, 2019 11:52 pm
by TomAiello
T_MAC686 wrote: ↑Sat Jul 06, 2019 7:43 pm
Dragonfly 2, FRN Chaparral, and Manix 2 LW!
Perfect list. :)
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Mon Jul 08, 2019 4:45 am
by Ngati Pom
UKPK, both leaf and drop point, please or FRN Stretch or Chappy LTW.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Mon Jul 08, 2019 4:53 am
by Wartstein
Ngati Pom wrote: ↑Mon Jul 08, 2019 4:45 am
UKPK, both leaf and drop point, please or FRN Stretch or Chappy LTW.
+1 for the last two on your list
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Mon Jul 08, 2019 5:22 am
by T_MAC686
TomAiello wrote: ↑Sun Jul 07, 2019 11:52 pm
T_MAC686 wrote: ↑Sat Jul 06, 2019 7:43 pm
Dragonfly 2, FRN Chaparral, and Manix 2 LW!
Perfect list. :)
I would guess that the Manix 2 LW would be first and most likely from that list, since the other LC200N models are made in Golden. Be nice if the Seki FRN lineup did a run though and we got that Dragonfly
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Mon Jul 08, 2019 6:22 am
by npad69
Catcherman PE please
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Mon Jul 08, 2019 6:46 am
by Sumdumguy
npad69 wrote: ↑Mon Jul 08, 2019 6:22 am
Catcherman PE please
Yes, it is time for a new Catcherman. That is one model that has eluded me. No better steel than LC200N!
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Mon Jul 08, 2019 6:20 pm
by T_MAC686
While highly unlikely I think it would be amazing if they made a linerless backlock version of the Gayle Bradley Air with LC200N and a wire pocket clip. Handle scales could be something like CF or jigged titanium to keep it a “gents knife” or G-10 for a most cost effective option..
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Tue Jul 09, 2019 11:49 am
by VashHash
Also if we're talking any model. Spyderco Kris. Just bring it back. Don't even care what steel.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Tue Jul 09, 2019 3:25 pm
by Molle Ninja
PM2
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Tue Jul 09, 2019 3:52 pm
by Chris_P_Bacon
Great to see all the love for the catcherman.
I've got an old combo edge that's seen better days. Would love to replace that one with a PE, seeing how the combo edge doesn't really fillet well.
But I also want a SE one for around the house & yard. 4.313" (110mm) of pure cutting awesomeness.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Tue Jul 09, 2019 5:10 pm
by Sumdumguy
VashHash wrote: ↑Tue Jul 09, 2019 11:49 am
Also if we're talking any model. Spyderco Kris. Just bring it back. Don't even care what steel.
I haven't thought of that one in a long time!
Me want!
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Tue Jul 09, 2019 8:37 pm
by DukeBrnz
Military for sure.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Wed Jul 10, 2019 12:52 am
by emanuel
Pacific Salt SE with the current Endura 3 handle and a pointier tip.
Re: You can run any model you want in LC200N. Which do you choose?
Posted: Wed Jul 10, 2019 12:56 am
by ChrisinHove
Nate wrote: ↑Sat Jul 06, 2019 2:46 pm
I'd like to see the LC200N UKPK that's been talked about happen.
Me too.