Page 3 of 5

Re: Slipjoint mod Para 3

Posted: Sun Jul 07, 2019 6:26 am
by FK
DiRk,

Very creative design modification, thanks for sharing.

Regards,
FK

Re: Slipjoint mod Para 3

Posted: Mon Jul 08, 2019 12:35 pm
by diRk_262
Sal, are you still interested to get the file to 3D print the part for testing? If yes I need an E-Mail address where I can send it to.

Thanks all for your feedback.
This part produced by spyderco would be great!

Re: Slipjoint mod Para 3

Posted: Fri Aug 02, 2019 12:49 pm
by diRk_262
Really sad that there is no answer about the part :(
I thought this could be a really great opportunity for Spyderco to sell more of there wonderful knives even in country’s where the knife law is prohibiting to carry a folding - locking knife.

Re: Slipjoint mod Para 3

Posted: Fri Aug 02, 2019 1:04 pm
by Wartstein
diRk_262 wrote:
Fri Aug 02, 2019 12:49 pm
Really sad that there is no answer about the part :(
I thought this could be a really great opportunity for Spyderco to sell more of there wonderful knives even in country’s where the knife law is prohibiting to carry a folding - locking knife.

So you got no reply at all where to send the part or a 3D file? You were asked to do so, right?

Re: Slipjoint mod Para 3

Posted: Fri Aug 02, 2019 1:34 pm
by Spydergirl88
diRk_262 wrote:
Fri Aug 02, 2019 12:49 pm
Really sad that there is no answer about the part :(
I thought this could be a really great opportunity for Spyderco to sell more of there wonderful knives even in country’s where the knife law is prohibiting to carry a folding - locking knife.
Did you try clicking on Sal's profile where it says "send email"?

Re: Slipjoint mod Para 3

Posted: Sat Aug 03, 2019 2:27 am
by diRk_262
Yes, no reply where to send the 3D model :confused:

Re: Slipjoint mod Para 3

Posted: Sat Aug 03, 2019 7:21 am
by Woodpuppy
*deleted*

Because Sal provided his current email below.

Re: Slipjoint mod Para 3

Posted: Sat Aug 03, 2019 7:35 am
by Doc Dan
Or you can contact Tazkristi, or other Spyderco employee, here and get his email since he asked you to email the file.

Re: Slipjoint mod Para 3

Posted: Sat Aug 03, 2019 8:01 am
by Mushroom
diRk_262 wrote:
Sat Aug 03, 2019 2:27 am
Yes, no reply where to send the 3D model :confused:
Follow this link to send an email to Sal - memberlist.php?mode=email&u=21

or

Mail a physical copy to the address provided on the first page.
sal wrote:
Mon Jul 01, 2019 2:47 pm
Hi DiRk,

Welcome to our forum.

Very interesting conversion. Could I get you to send one to me?

Spyderco
Attn: Sal Glesser
820 Spyderco Way
Golden, CO 80403 USA

sal
:spyder:

Re: Slipjoint mod Para 3

Posted: Sat Aug 03, 2019 11:09 am
by sal
diRk_262 wrote:
Mon Jul 08, 2019 12:35 pm
Sal, are you still interested to get the file to 3D print the part for testing? If yes I need an E-Mail address where I can send it to.

Thanks all for your feedback.
This part produced by spyderco would be great!
Hi DiRk,

sglesser@spyderco.com

sal

Re: Slipjoint mod Para 3

Posted: Sat Aug 03, 2019 1:26 pm
by diRk_262
sal wrote:
Sat Aug 03, 2019 11:09 am
diRk_262 wrote:
Mon Jul 08, 2019 12:35 pm
Sal, are you still interested to get the file to 3D print the part for testing? If yes I need an E-Mail address where I can send it to.

Thanks all for your feedback.
This part produced by spyderco would be great!
Hi DiRk,

sglesser@spyderco.com

sal

Thanks for your reply.
An email was send some minutes ago.

Really curious what you and Spyderco can make out of this idea.

Re: Slipjoint mod Para 3

Posted: Fri Aug 23, 2019 2:25 pm
by diRk_262
Hi there...
Any progress or news about the part? :cool:

Re: Slipjoint mod Para 3

Posted: Mon Aug 26, 2019 9:39 am
by Ruudr
I am also curious how this will will play out. A very inventive idea with a lot of potential! Maibe a Lionsteel T.R.E-ish mod?

Re: Slipjoint mod Para 3

Posted: Wed Sep 04, 2019 5:08 am
by diRk_262
No updates on this? :confused:

Re: Slipjoint mod Para 3

Posted: Wed Sep 04, 2019 8:16 am
by Marulaghost
I'd imagine they're going through some prototyping and testing. That can usually take a fair while

Re: Slipjoint mod Para 3

Posted: Wed Sep 04, 2019 10:58 am
by diRk_262
Marulaghost wrote:
Wed Sep 04, 2019 8:16 am
I'd imagine they're going through some prototyping and testing. That can usually take a fair while
I would be totally ok with that. It would just be nice to hear the actual status :)

Re: Slipjoint mod Para 3

Posted: Wed Sep 04, 2019 12:22 pm
by rwasham
Very interesting design....have you done anything similar for liner lock designs? I'm guessing the technology would not be terribly different. In any case, awesome!

Re: Slipjoint mod Para 3

Posted: Thu Sep 05, 2019 2:45 pm
by diRk_262
Until now I only modded the compression lock.
Maybe the liner lock will follow ;)

Re: Slipjoint mod Para 3

Posted: Thu Sep 05, 2019 4:41 pm
by Mushroom
rwasham wrote:
Wed Sep 04, 2019 12:22 pm
Very interesting design....have you done anything similar for liner lock designs? I'm guessing the technology would not be terribly different. In any case, awesome!
I don't think a mod like this is possible on a liner lock. This mod fits into a cutout for the compression lock that doesn't exist on a liner lock. The compression lock is not simply a liner lock on the back of the knife, it operates very differently compared to a liner lock.

:spyder:

Re: Slipjoint mod Para 3

Posted: Thu Sep 12, 2019 12:35 pm
by sal
Hi DiRk,

I was checking with R&D and they said that the file did not come through and was not usable. Sorry i didn't check sooner. We'll have to do a better job. Can I get you to resend the file?

Send to:

Sglesser@spyderco.com and to
Peterj@spyderco.com

or send a disc or?

sal