Bulk Pre-Order
- standy99
- Member
- Posts: 2217
- Joined: Sat Jul 22, 2017 11:07 am
- Location: Between Broome and Cairns somewhere
Re: Bulk Pre-Order
I’m in on M4 anything chartreuse
Im a vegetarian as technically cows are made of grass and water.
Re: Bulk Pre-Order
I have a hard time seeing this working. A lot of valid points brought up already. Getting enough people to agree on a model and material combination is one thing, but I feel like getting people to wait the amount of time it requires to get a knife into production without complaining would probably be the hardest part. Especially if they've put up the full cost of the knife. IIRC, dealers submit orders for exclusives at least a year before they plan to see it in production.
Spyderco literally changed the structure of their catalogs because too many people were complaining about waiting for a prototype they saw in a catalog, let alone a knife they paid for. We've all seen how some people act when their $5 pre-order hasn't been released yet. :rolleyes:
Spyderco literally changed the structure of their catalogs because too many people were complaining about waiting for a prototype they saw in a catalog, let alone a knife they paid for. We've all seen how some people act when their $5 pre-order hasn't been released yet. :rolleyes:
-Nick
Re: Bulk Pre-Order
First, the knife would probably have to be Golden model.
Second, there really are not that many different combinations I think most will be completely opposed to (Salt, Cru-carta, M390/g10). I think most on here have pretty good taste in materials and I believe we could come together.
If it was a a way to ensure you would basically get a sprint run,that you might actually have a choice in, I’m willing to wait a year or so. Also, I can spend the time looking and paying for other knives I want, and not constantly reserving X amount of money for a sprint or exclusive that pops up.
Second, there really are not that many different combinations I think most will be completely opposed to (Salt, Cru-carta, M390/g10). I think most on here have pretty good taste in materials and I believe we could come together.
If it was a a way to ensure you would basically get a sprint run,that you might actually have a choice in, I’m willing to wait a year or so. Also, I can spend the time looking and paying for other knives I want, and not constantly reserving X amount of money for a sprint or exclusive that pops up.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
-
- Member
- Posts: 6909
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Bulk Pre-Order
Why not just bug your favorite dealer for an exclusive? That's what you are really talking about now, not an actual group buy.TomAiello wrote: ↑Fri Jun 28, 2019 5:08 pmMake them a regular dealer. Maybe DLT, BladeHQ or Knifeworks. If they had 500 of them pre-sold, they'd almost certainly be willing to take a chance on the rest of the MOQ.yablanowitz wrote: ↑Fri Jun 28, 2019 4:35 pmWho gets to collect the money and place the order? What happens if that person opts to take the money and disappear?
Re: Bulk Pre-Order
Let's get a thor Damascus chief going with G10 to keep cost down and put Damasteel in everyone's hands.
Re: Bulk Pre-Order
Such an approach would not have to be limited to "only" steel, handle material or color... what about BLADE STYLE or LENGTH or THICKNESS?
For example I think I´ve read several times that people would like a PM2 featuring a longer blade (so extending all the way to the end of the handle when closed and not leaving a "gap"). I personally would like to see that exact same thing in the new Endela (its blade could be about 8mm longer and still fit into the handle).
I totally get that in the "mass-models" the blade length has to match certain legal restrictions (so for example stay under 3.00" or 3.5""), but to produce just one sample with longer blades should not be too hard to do (other than modifying a HANDLE, especially the molds for an FRN handle, lengthen the BLADE a bit should not be a too big deal or too costly).
You could extend that to blade STYLES or STOCK: Like the Tanto PM2 Eric shows in a vid (though I personally am not interested in that specific model), or a 2mm instead of 3mm stock Stretch and so on...
For example I think I´ve read several times that people would like a PM2 featuring a longer blade (so extending all the way to the end of the handle when closed and not leaving a "gap"). I personally would like to see that exact same thing in the new Endela (its blade could be about 8mm longer and still fit into the handle).
I totally get that in the "mass-models" the blade length has to match certain legal restrictions (so for example stay under 3.00" or 3.5""), but to produce just one sample with longer blades should not be too hard to do (other than modifying a HANDLE, especially the molds for an FRN handle, lengthen the BLADE a bit should not be a too big deal or too costly).
You could extend that to blade STYLES or STOCK: Like the Tanto PM2 Eric shows in a vid (though I personally am not interested in that specific model), or a 2mm instead of 3mm stock Stretch and so on...
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Bulk Pre-Order
Another blade shape would be nice as well. Something like a sheepsfoot or wharncliffe on a model they are usually not on. Or, maybe a modified wharncliffe on an existing model.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
-
- Member
- Posts: 6909
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Bulk Pre-Order
I'm confused. Are we back to wishing for a Spyderco Custom Shop for the umpteenth time?
-
- Member
- Posts: 421
- Joined: Fri Apr 06, 2018 9:14 pm
- Location: “Beam me up Scotty, there’s no intelligent life down here.”
Re: Bulk Pre-Order
Interested. Depending on the knife.
:spyder: Shaman REX 45, Smock, Baby Jess Horn CE, Spydiechef, Schempp Bowie,Ti Fluted Military, Titanium Military, Native S30 V and G10, PM 2 in S35VN, and S110V, Manix 2 LW BD1 and SPY 27, Sage 5, Positron black CPM S30V, Chaparral w/Raffir Noble scales, SuperLeaf VG 10, Ladybug H1, Dragonfly 2 in ZDP 189 and Superblue/420J1 and H1, Delica in ZDP 189, Clipitool Standard, the Cook’s knife VG10, Santoku, paring and utility knives, all in MBS 26. :spyder:
-
- Member
- Posts: 161
- Joined: Wed Sep 12, 2018 1:59 am
- Location: Australia
Re: Bulk Pre-Order
Pick one of the 3 most popular knives, make it out of one of the 3 most popular steels. Pick an inoffensive color and put a subtle( not big and gaudy) spyderco forum logo on it. I really can't see something like this being a flop.
Personally I'd love to see this come to pass as a Military but I know that's a bigger knife than many can carry or have use for. No problem with a Manix 2. a Native 5 or a PM 2. A para 3 would also go well but just not for me.
Personally I'd love to see this come to pass as a Military but I know that's a bigger knife than many can carry or have use for. No problem with a Manix 2. a Native 5 or a PM 2. A para 3 would also go well but just not for me.
- donutsrule
- Member
- Posts: 433
- Joined: Fri Sep 24, 2004 10:33 am
- Location: San Diego
- SpyderEdgeForever
- Member
- Posts: 6325
- Joined: Mon Jul 23, 2012 6:53 pm
- Location: USA
Re: Bulk Pre-Order
What about the PM Tanto that Eric Glesser showed?
Re: Bulk Pre-Order
Also, with a pre payment Spyderco knows exactly how many to make with no over stock.amateur blacksmith wrote: ↑Thu Jul 04, 2019 8:47 amPick one of the 3 most popular knives, make it out of one of the 3 most popular steels. Pick an inoffensive color and put a subtle( not big and gaudy) spyderco forum logo on it. I really can't see something like this being a flop.
Personally I'd love to see this come to pass as a Military but I know that's a bigger knife than many can carry or have use for. No problem with a Manix 2. a Native 5 or a PM 2. A para 3 would also go well but just not for me.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
Re: Bulk Pre-Order
I guess I’m not that imaginative. Cruwear or M4 or rex45 and micarta para3 or pm2 would be a homerun for me.
- Naperville
- Member
- Posts: 4431
- Joined: Sun Feb 04, 2018 2:58 am
- Location: Illinois, USA
Re: Bulk Pre-Order
:Dyablanowitz wrote: ↑Wed Jul 03, 2019 3:42 pmI'm confused. Are we back to wishing for a Spyderco Custom Shop for the umpteenth time?
M4 DLC or 204P, G10, Shaman, yep sounds good...
I support the 2nd Amendment Organizations of GOA, NRA, FPC, SAF, and "Knife Rights"
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
T2T: https://tunnel2towers.org; Special Operations Wounded Warriors: https://sowwcharity.com/
- Tucson Tom
- Member
- Posts: 1633
- Joined: Tue Mar 28, 2017 10:19 pm
- Location: Somewhere in Arizona
Re: Bulk Pre-Order
Sounds like you are describing an Exclusive. Just a matter of finding out the minimum quantity and fronting a bunch of money and you should be on the air. Do a Manix 2 in Rex 45 and I'll buy one.
Re: Bulk Pre-Order
This DLT PM2 issue is another reason why I recommended doing something like this. We don’t all have to waste our time trying to get a knife we could pre order, and everyone who wants one can get one.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”