Bulk Pre-Order
Bulk Pre-Order
I don’t know if this has been covered before, but I couldn’t find any info.
Is there a way for us to do a bulk pre-order directly through Spyderco or even one of the dealers. We could all vote on a model in a configuration through poles on the forum, then pre-pay for the model and wait. For instance a PM2 Cru-wear/Micarta.
I say this because of some of the difficulties getting a model in a configuration one wants. I guess it’s like ordering any custom, that we would all vote on.
What are y’alls thoughts.
Is there a way for us to do a bulk pre-order directly through Spyderco or even one of the dealers. We could all vote on a model in a configuration through poles on the forum, then pre-pay for the model and wait. For instance a PM2 Cru-wear/Micarta.
I say this because of some of the difficulties getting a model in a configuration one wants. I guess it’s like ordering any custom, that we would all vote on.
What are y’alls thoughts.
Dane
“Stop buying your kids what you never had and start teaching them what you never knew!”
“Stop buying your kids what you never had and start teaching them what you never knew!”
Re: Bulk Pre-Order
Yes the idea has been floated here before. I believe the consensus was that there aren't enough forum members to cover the cost.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
- rabbitanarchy14
- Member
- Posts: 561
- Joined: Wed Feb 27, 2019 4:25 am
- Location: Michigan, USA, Earth
Re: Bulk Pre-Order
there are 25k ppl registered, we really could not get 500 to buy 2 or 3? i do think this is feasible. i am down for 2 or 3 of sprints for us.
192.168.0.1 -Para 3 G10 M390 Red, Dice XHP, Lil Native Rex 45 comp, Manix 2 M390 G10 BR, PM2 M390 DLC BL, PM2 k390 RGreen, Cat BD1N, Dragonfly 2 k390
Saving for - Lil Native K390, D'allara 3, UTX-70
Instruments- Kimber EVO, SA Hellcat, SW Shield Plus 9
Saving for - Lil Native K390, D'allara 3, UTX-70
Instruments- Kimber EVO, SA Hellcat, SW Shield Plus 9
Re: Bulk Pre-Order
I’m intrigued.
Re: Bulk Pre-Order
The dealer would also need to deliver internationally since so many on the forum are not USA based
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: Bulk Pre-Order
Given Spyderco's general willingness to go above and beyond to please their most loyal customers, I'd imagine that if something like this was a possibility, it would have happened by now. To my knowledge, it has not. Seems to me, this would be a logistical nightmare and is unlikely to happen..
That said.. if it does, I'm in.
That said.. if it does, I'm in.
Rick H.
..well, that escalated quickly..
..well, that escalated quickly..
-
- Member
- Posts: 101
- Joined: Sat Jan 19, 2019 6:58 pm
Re: Bulk Pre-Order
They have done a forum knife in the past.
Re: Bulk Pre-Order
I would be very impressed if you could get 20 people to agree on a model, color, and steel.rabbitanarchy14 wrote: ↑Fri Jun 28, 2019 12:27 pmthere are 25k ppl registered, we really could not get 500 to buy 2 or 3? i do think this is feasible. i am down for 2 or 3 of sprints for us.
- bearfacedkiller
- Member
- Posts: 11412
- Joined: Sat Jan 04, 2014 1:22 pm
- Location: hiding in the woods...
Re: Bulk Pre-Order
Yup, the problem is not getting enough people to participate but rather getting enough people to agree on a model and its configuration.SF Native wrote: ↑Fri Jun 28, 2019 2:18 pmI would be very impressed if you could get 20 people to agree on a model, color, and steel.rabbitanarchy14 wrote: ↑Fri Jun 28, 2019 12:27 pmthere are 25k ppl registered, we really could not get 500 to buy 2 or 3? i do think this is feasible. i am down for 2 or 3 of sprints for us.
That said, a Cruwear/canvas micarta Para2 would be an easy sell. A very easy sell. I’ll take one! :D
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?
Re: Bulk Pre-Order
I'm in for a tennis ball yellow g10 para 3 in lc200n and dlc coated blade. Surely with 25k members there's other lunatics like me. :eek:
Edit: I'm flexible for a banana yellow.
Edit: I'm flexible for a banana yellow.
Re: Bulk Pre-Order
Well now you're just being ridiculous.
- Attachments
-
- members.jpg (14.54 KiB) Viewed 2308 times
- steelcity16
- Member
- Posts: 5353
- Joined: Mon Dec 11, 2017 11:34 am
Re: Bulk Pre-Order
I've been asking for this exact combo for ages in other models. Neon yellow G10 is out there...
CRU-CARTA THE SEKI MODELS! AND BRING US THE DODO-FLY!
Re: Bulk Pre-Order
Me too!!bearfacedkiller wrote: ↑Fri Jun 28, 2019 2:26 pmYup, the problem is not getting enough people to participate but rather getting enough people to agree on a model and its configuration.SF Native wrote: ↑Fri Jun 28, 2019 2:18 pmI would be very impressed if you could get 20 people to agree on a model, color, and steel.rabbitanarchy14 wrote: ↑Fri Jun 28, 2019 12:27 pmthere are 25k ppl registered, we really could not get 500 to buy 2 or 3? i do think this is feasible. i am down for 2 or 3 of sprints for us.
That said, a Cruwear/canvas micarta Para2 would be an easy sell. A very easy sell. I’ll take one! :D
+1!
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: Bulk Pre-Order
rabbitanarchy14 wrote: ↑Fri Jun 28, 2019 12:27 pmthere are 25k ppl registered, we really could not get 500 to buy 2 or 3? i do think this is feasible. i am down for 2 or 3 of sprints for us.
Out of that 25K, more than half were either spammers or only came here once or twice and lost interest. Another fairly large group are folks who were active at one time, but have not visited the forum in years. The number of currently active members is probably well under 5K. I'd actually be surprised if it was greater than 2K and would not be terribly surprised if it was under 1K. Then you run into the "I'd buy it if" factor, where no matter what model, steel, handle material, handle color, blade finish, edge type is proposed, many of the potential buyers won't want that exact combination.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
-
- Member
- Posts: 6909
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Re: Bulk Pre-Order
Who gets to collect the money and place the order? What happens if that person opts to take the money and disappear? The past forum knives have been on Spyderco completely. They say what it will be, they make it, they sell it, they take all the risk. If it doesn't sell, they are stuck with it.
Re: Bulk Pre-Order
Picking the "right" model would be the trickiest part: I know that if I like a model I would be open to all sorts of variations (colour, handle material, steel)... but if I don't particularly like a model then I wouldn't even care about the rest.
Which means that for the pre-order to be a success we would have to choose one of the most popular models a.k.a. the usual suspects (Para 2, Para 3 etc.), and there are already plenty of sprints for these.
Time is a great teacher. Unfortunately, it kills all its pupils.
Re: Bulk Pre-Order
Make them a regular dealer. Maybe DLT, BladeHQ or Knifeworks. If they had 500 of them pre-sold, they'd almost certainly be willing to take a chance on the rest of the MOQ.yablanowitz wrote: ↑Fri Jun 28, 2019 4:35 pmWho gets to collect the money and place the order? What happens if that person opts to take the money and disappear?
Re: Bulk Pre-Order
All good points. What is missing?
We are missing pm2 and para3 salts.
Micarta might be back on the menu.
We are missing impractical combinations like a Super blue manix. Japanese steels in USA, etc.
Otherwise, we could call for some popular combinations in new models like the grey and black 52100 knifeworks manix in a para3. That would be nice. I’m sure people want the red dlt in other models.
Otherwise, new customers want access to long gone sprints.
We are missing pm2 and para3 salts.
Micarta might be back on the menu.
We are missing impractical combinations like a Super blue manix. Japanese steels in USA, etc.
Otherwise, we could call for some popular combinations in new models like the grey and black 52100 knifeworks manix in a para3. That would be nice. I’m sure people want the red dlt in other models.
Otherwise, new customers want access to long gone sprints.
-
- Member
- Posts: 22
- Joined: Sun Feb 03, 2019 11:01 pm
Re: Bulk Pre-Order
Count me in as long as it’s not too weird.