Page 5 of 7

Re: s90v SHAMAN IS OUT

Posted: Thu May 30, 2019 9:31 pm
by sal
Hi Stoby,

Welcome to our forum.

sal

Re: s90v SHAMAN IS OUT

Posted: Thu May 30, 2019 10:21 pm
by SalomonA
Let me say that I love the look, feel in the hand, and weight of this beautiful knife, as well as the steel. I just feel like it is not near as smooth as my other compression lock spydies, such as my cf yojimbo, para 2, and sliverax, which all free fall down and flick open with ease. This CF Shaman still flicks open if I do it hard enough, but there is a lot of resistance in the action, especially near the top bit. Is this typical of all shamans? I've been playing with it for two days straight, and it's showing no signs of smoothing up. At this point, I may end up selling it to get my money back, as I would rather carry a buttery smooth sliverax than the beefy shaman that has a rough action. Again, don't get me wrong, I love the size, looks, and materials of the blade, I just wish that a knife of this size could be made to pivot a whole lot smoother, as the action is a knife killer for me

Re: s90v SHAMAN IS OUT

Posted: Thu May 30, 2019 10:42 pm
by Extra330SC
SalomonA wrote:
Thu May 30, 2019 10:21 pm
Let me say that I love the look, feel in the hand, and weight of this beautiful knife, as well as the steel. I just feel like it is not near as smooth as my other compression lock spydies, such as my cf yojimbo, para 2, and sliverax, which all free fall down and flick open with ease. This CF Shaman still flicks open if I do it hard enough, but there is a lot of resistance in the action, especially near the top bit. Is this typical of all shamans? I've been playing with it for two days straight, and it's showing no signs of smoothing up. At this point, I may end up selling it to get my money back, as I would rather carry a buttery smooth sliverax than the beefy shaman that has a rough action. Again, don't get me wrong, I love the size, looks, and materials of the blade, I just wish that a knife of this size could be made to pivot a whole lot smoother, as the action is a knife killer for me
My action is exactly how this sample is working at 4:26 in video! The compression lock needs to be pushed all the way over to get the detent ball up on the tang...so the blade drops freely. https://youtu.be/jKURYlu8eIs

That being said....the Shaman is a beefy working knife that has large phosphorus bronze washers! I don't think the action is going to compare to ball bearing comp locks like the Sliverax or Amalgam! Maybe a micro pivot adjustment? Good luck and I hope it works out for you .

James

Re: s90v SHAMAN IS OUT

Posted: Fri May 31, 2019 4:15 am
by curlyhairedboy
Washer knives will definitely smooth out once they're broken in. I'd say give it some time, keep using it.

Re: s90v SHAMAN IS OUT

Posted: Fri May 31, 2019 4:26 am
by stoby22
sal wrote:
Thu May 30, 2019 9:31 pm
Hi Stoby,

Welcome to our forum.

sal
Thank you Sal! Knife will be here Saturday! Cant wait!

Re: s90v SHAMAN IS OUT

Posted: Fri May 31, 2019 8:58 am
by GiftedMisfit
SalomonA wrote:
Thu May 30, 2019 10:21 pm
Let me say that I love the look, feel in the hand, and weight of this beautiful knife, as well as the steel. I just feel like it is not near as smooth as my other compression lock spydies, such as my cf yojimbo, para 2, and sliverax, which all free fall down and flick open with ease. This CF Shaman still flicks open if I do it hard enough, but there is a lot of resistance in the action, especially near the top bit. Is this typical of all shamans? I've been playing with it for two days straight, and it's showing no signs of smoothing up. At this point, I may end up selling it to get my money back, as I would rather carry a buttery smooth sliverax than the beefy shaman that has a rough action. Again, don't get me wrong, I love the size, looks, and materials of the blade, I just wish that a knife of this size could be made to pivot a whole lot smoother, as the action is a knife killer for me


Little drop of lube to the pivot and detent. Smooth as my pm2's. No torx were required. Hopefully it warms up to you.

Re: s90v SHAMAN IS OUT

Posted: Fri May 31, 2019 5:23 pm
by SLOSpyder
New to forum.

I pre-ordered this on 5/21 from knifecenter. It still shows as pre-order. But I’m looking at the release thread and it says the Shaman CF was already released.

I see people posting KC has a “reputation”. I don’t know what that is. Other sites are showing sold out. Did anyone here order from KC and get there’s? Or is there still chance KC will come thru?

Thx

Re: s90v SHAMAN IS OUT

Posted: Fri May 31, 2019 10:00 pm
by sal
Hi SLOSpyder,

Welcome to our forum.

sal

Re: s90v SHAMAN IS OUT

Posted: Sat Jun 01, 2019 1:03 am
by SLOSpyder
sal wrote:
Fri May 31, 2019 10:00 pm
Hi SLOSpyder,

Welcome to our forum.

sal
Thank you Sal.

It’s a humble honor for the personal acknowledgement.

I still remember walking into the local sporting goods store intent on buying my first knife not given to me by my father. I went to the counter looking into the case for the perfect knife. There it was; a smaller serrated blade. Knife was smaller than those around it. But the full stainless steel glowing in the case light was calling to me. 20+ years later, I still have that ATS-55 SS Delica. I came back and picked up one or two Spyders over the last 5-7 years. But the Para 3 brought me back for good and replaced the Delica in my pocket. Since then I realized what I’ve been missing. Now I’m at around 20 Spyders. I can’t say anything but the best about this company to my peers.

Here’s to hoping my Shaman CF comes thru!

Re: s90v SHAMAN IS OUT

Posted: Sat Jun 01, 2019 5:04 am
by Nate
SLOSpyder wrote:
Fri May 31, 2019 5:23 pm
...I see people posting KC has a “reputation”. I don’t know what that is. Other sites are showing sold out. Did anyone here order from KC and get there’s? Or is there still chance KC will come thru?

Thx

Welcome to the forum.

In the past, KC has oversold pre-orders and ended up not getting enough stock, so some orders ended up being canceled. I've never had that issue and don't recall the exact details, my many pre-orders with them have been fulfilled. (Maybe around the time of the light gray Cruwear Military sprint?)

I've not heard of this happening with them for several years and I don't imagine it was intentional, but understandably if you had a pre-order on a must have sprint and KC canceled your order after it was sold out everywhere else, you'd probably have a long memory about it...

Re: s90v SHAMAN IS OUT

Posted: Wed Jun 05, 2019 3:55 pm
by buccilli15
In stock at both GP & Knifejoy!

Re: s90v SHAMAN IS OUT

Posted: Wed Jun 05, 2019 7:45 pm
by nicked.onaut
This Shaman Sprint is one of the most well-finished Spydies I've received in the last couple of years. No flaws to the touch (nor with a 10x Loupe!) and it opens and closes with smoothness and finality. Ker-snack. Great choice of smooth texture to the CF scales. The ergos of the countours and profile, make for certainty of grasp. If the scales were not *made* for my hand, then my hand automatically melds to this grip, as it feels a natural extension of my paw. Gratzi, S. Glesser.

Here are a few quick bundled cell pix of recently arrived Shaman Sprint, BBS Delica M390, Native Chief, LadyBug Pakkawood HAP40, and the DLT 20CV DLC PM2.

Haven't seen many posts/pics of the NC, BBS, nor LB PW. I'll try to get some better daylight photos of these, before they head out as graduation gifts. (The Shaman is not for a grad per se, but an in-law finishing law clerkship with a US District judge. Knife rights, hehe)

please forgive the html block crossing threads

Image

Image

Image

Image

Image

Image

Image

Re: s90v SHAMAN IS OUT

Posted: Wed Jun 05, 2019 7:49 pm
by TkoK83Spy
You are blowing like 15 threads up with these same pics...we get it bud

Re: s90v SHAMAN IS OUT

Posted: Wed Jun 05, 2019 9:14 pm
by GiftedMisfit
TkoK83Spy wrote:
Wed Jun 05, 2019 7:49 pm
You are blowing like 15 threads up with these same pics...we get it bud

Was thinking the same thing. Guess the reactions arent good enough? Nice knives and all they just dont speak to me. Nor the pics really.

Re: s90v SHAMAN IS OUT

Posted: Wed Jun 05, 2019 9:18 pm
by ZrowsN1s
Aww come on give him a break, I like the pics :D that Shaman is giving me SERIOUS FOMO. I almost bought one this afternoon. I reminded myself that I already have two Shamans and I can only buy one knife this month, so I bought the Chief instead. Still looking at those Shaman pics make me sweat a little. Maybe they'll still be a few left next month 🤞

Re: s90v SHAMAN IS OUT

Posted: Wed Jun 05, 2019 9:35 pm
by Extra330SC
nicked.onaut wrote:
Wed Jun 05, 2019 7:45 pm
This Shaman Sprint is one of the most well-finished Spydies I've received in the last couple of years. No flaws to the touch (nor with a 10x Loupe!) and it opens and closes with smoothness and finality. Ker-snack. Great choice of smooth texture to the CF scales. The ergos of the countours and profile, make for certainty of grasp. If the scales were not *made* for my hand, then my hand automatically melds to this grip, as it feels a natural extension of my paw. Gratzi, S. Glesser.
Congratulations on the Shaman! I definitely think it's up there in the top 10 best knives to come out of Golden , For me personally!

James

Re: s90v SHAMAN IS OUT

Posted: Thu Jun 06, 2019 6:24 am
by soundshaman
nicked.onaut wrote:
Wed Jun 05, 2019 7:45 pm
Thank you for the pictures man! I'm jealous of that lovely collection of the latest and greatest :D enjoy!

Re: s90v SHAMAN IS OUT

Posted: Thu Jun 06, 2019 10:05 am
by curlyhairedboy
Got the CF shaman in. It's as nice as the 40th anniversary native!
d3Y11PM.jpg

Re: s90v SHAMAN IS OUT

Posted: Tue Jun 11, 2019 7:24 pm
by BigGrove
Just picked one up on ebay from whitemountainknives. I received a promotion for 13% back in ebay bucks which comes out to $36. That made it a no brainer for me.

Re: s90v SHAMAN IS OUT

Posted: Tue Jun 11, 2019 7:35 pm
by Woodpuppy
That is a sharp looking knife.