Short question:
Are the pivot holes in the liners D-shaped, i.e. I have to loosen only one screw and then on which side or are the holes rounded which means I have to use two Torx8?
Thanks in advance! :)
Lil' Native CompLock Pivot Screws
- Forest Elk
- Member
- Posts: 79
- Joined: Tue Mar 18, 2008 9:16 am
- Location: Black Forest, South Germany
- Contact:
Lil' Native CompLock Pivot Screws
"Never leave home without a knife!" :spyder:
My Spydies: Native CPM440V, Delica4-ZDP, Delica4-ZDP, Delica4 FFG, Endura4-ZDP, Endura4, UKPK-G10, UKPK-CF, Salt1, PM 2, Dragonfly 2, Dragonfly Salt, Dragonfly-ZDP, Dragonfly Nishijin, Squeak, Lil' Native CompLock, Dragonfly-G10
My Spydies: Native CPM440V, Delica4-ZDP, Delica4-ZDP, Delica4 FFG, Endura4-ZDP, Endura4, UKPK-G10, UKPK-CF, Salt1, PM 2, Dragonfly 2, Dragonfly Salt, Dragonfly-ZDP, Dragonfly Nishijin, Squeak, Lil' Native CompLock, Dragonfly-G10
- rabbitanarchy14
- Member
- Posts: 561
- Joined: Wed Feb 27, 2019 4:25 am
- Location: Michigan, USA, Earth
Re: Lil' Native CompLock Pivot Screws
they a both sides d shaped. which captively hold the bronze washers as well. yes 2 torx on both side if you want both scales off and the pivot.Forest Elk wrote: ↑Thu Apr 11, 2019 2:38 amShort question:
Are the pivot holes in the liners D-shaped, i.e. I have to loosen only one screw and then on which side or are the holes rounded which means I have to use two Torx8?
Thanks in advance! :)
192.168.0.1 -Para 3 G10 M390 Red, Dice XHP, Lil Native Rex 45 comp, Manix 2 M390 G10 BR, PM2 M390 DLC BL, PM2 k390 RGreen, Cat BD1N, Dragonfly 2 k390
Saving for - Lil Native K390, D'allara 3, UTX-70
Instruments- Kimber EVO, SA Hellcat, SW Shield Plus 9
Saving for - Lil Native K390, D'allara 3, UTX-70
Instruments- Kimber EVO, SA Hellcat, SW Shield Plus 9
- Forest Elk
- Member
- Posts: 79
- Joined: Tue Mar 18, 2008 9:16 am
- Location: Black Forest, South Germany
- Contact:
Re: Lil' Native CompLock Pivot Screws
Thank you Sir!rabbitanarchy14 wrote: ↑Thu Apr 11, 2019 3:19 amthey a both sides d shaped. which captively hold the bronze washers as well. yes 2 torx on both side if you want both scales off and the pivot.
I only want to adjust the pivot as the blade shows a little side-by-side play. But if both liners are D-shaped which pivot screw (on which side) do I have to tighten?
"Never leave home without a knife!" :spyder:
My Spydies: Native CPM440V, Delica4-ZDP, Delica4-ZDP, Delica4 FFG, Endura4-ZDP, Endura4, UKPK-G10, UKPK-CF, Salt1, PM 2, Dragonfly 2, Dragonfly Salt, Dragonfly-ZDP, Dragonfly Nishijin, Squeak, Lil' Native CompLock, Dragonfly-G10
My Spydies: Native CPM440V, Delica4-ZDP, Delica4-ZDP, Delica4 FFG, Endura4-ZDP, Endura4, UKPK-G10, UKPK-CF, Salt1, PM 2, Dragonfly 2, Dragonfly Salt, Dragonfly-ZDP, Dragonfly Nishijin, Squeak, Lil' Native CompLock, Dragonfly-G10
Re: Lil' Native CompLock Pivot Screws
I usually adjust only one screw, usually starboard side as I'm right handed. However, adjusting both screws evenly would probably be more "correct."
- Forest Elk
- Member
- Posts: 79
- Joined: Tue Mar 18, 2008 9:16 am
- Location: Black Forest, South Germany
- Contact:
Re: Lil' Native CompLock Pivot Screws
Thanks to you, Sir!
So I think I got it: There is a D-shaped pivot bolt and 2 screws... An exploded view picture would solve any remaining question. Is there someone who has such pic available?
- rabbitanarchy14
- Member
- Posts: 561
- Joined: Wed Feb 27, 2019 4:25 am
- Location: Michigan, USA, Earth
Re: Lil' Native CompLock Pivot Screws
i do its on my cell phone. i am working right now so when i get out in an hour or so i can upload it in pieces. but if its off center loosen all the screws and start from the bottom on tightening them up. the stand offs are also bolts on both sides.
192.168.0.1 -Para 3 G10 M390 Red, Dice XHP, Lil Native Rex 45 comp, Manix 2 M390 G10 BR, PM2 M390 DLC BL, PM2 k390 RGreen, Cat BD1N, Dragonfly 2 k390
Saving for - Lil Native K390, D'allara 3, UTX-70
Instruments- Kimber EVO, SA Hellcat, SW Shield Plus 9
Saving for - Lil Native K390, D'allara 3, UTX-70
Instruments- Kimber EVO, SA Hellcat, SW Shield Plus 9
-
- Member
- Posts: 332
- Joined: Sun Feb 03, 2019 8:02 pm
Re: Lil' Native CompLock Pivot Screws
There should be at least one disassembly video on YouTube availableForest Elk wrote: ↑Thu Apr 11, 2019 4:52 amThanks to you, Sir!
So I think I got it: There is a D-shaped pivot bolt and 2 screws... An exploded view picture would solve any remaining question. Is there someone who has such pic available?