Pocket Clip Sizing/Compatibility Info
-
- Member
- Posts: 14
- Joined: Fri Aug 02, 2019 1:35 pm
Re: Pocket Clip Sizing/Compatibility Info
Does anyone here know if the Paramilitary 1 and the Military share the same pocket clip?
Re: Pocket Clip Sizing/Compatibility Info
For the Autonomy 2, I got a clip for one of the Native 5 variants. However, I cannot recall which one…
Not a perfect fit. Covers the lanyard hole.
Not a perfect fit. Covers the lanyard hole.
Re: Pocket Clip Sizing/Compatibility Info
I tried to replace my PM2 clip with a Pacific Salt 2 clip. The PS2 screw holes are smaller, screws are shorter and (Ti) clip is thinner. I was bummed because I like the finish better.
Re: Pocket Clip Sizing/Compatibility Info
Does anyone know if there is any deep carry clip on the market that can be fit to the Resilience/Tenacious? I don't care about the lanyard tube, so it can be covered up no worries. I'm looking for existing production clips, not custom ones such as lynch/mxgear. Any of the ZT or BM ones would work?
Re: Pocket Clip Sizing/Compatibility Info
This is a great resource, thanks for putting it together!
I’ve been toying with swapping a couple of my clips because of color, style and the fact that I like tweaking my gear.
I agree this should be pinned. The knowledge of the people in this forum is second to none.
Great resource
I’ve been toying with swapping a couple of my clips because of color, style and the fact that I like tweaking my gear.
I agree this should be pinned. The knowledge of the people in this forum is second to none.
Great resource
Re: Pocket Clip Sizing/Compatibility Info
The Rhino with a Benchmade Bugout pocketclip is a big improvement over the factory pocketclip
Re: Pocket Clip Sizing/Compatibility Info
Just wanted to add, I confirmed that the Lil Temperance 3 is its own unique clip as far as I can tell. It is NOT compatible with the Native 5 LW clip, even though they look very close. Basically bought a Native 5 LW to confirm this against my LT3 clip. Additionally, per my email correspondence with MXG clips, the hole spacing for the two outer holes center to center on their Native 5 LW clip is 0.440" and I measured my LT3 at 0.500". Will probably be relevant again with the upcoming release of the LT3 LW soon, assuming they're using the same clip as on the discontinued G10 model.
Re: Pocket Clip Sizing/Compatibility Info
I think the LT3 shares the same clip pattern with the Chinook 4 (another disco'ed model, unfortunately).
And I can confirm that the LT3LW has the same clip as the G10 LT3 (I was sent an early production sample for review)
Re: Pocket Clip Sizing/Compatibility Info
Sometimes a thread really scratches an itch. This one definitely does. Ahhhhh...
Re: Pocket Clip Sizing/Compatibility Info
Never owned a Chinook but good to know there's probably clip compatibility at least. I can do a little 3D modeling and designed a clip adapter so i can use the wire clips on my LT3. Been working great for a number of weeks now. Really enjoyed your LT3LW review by the way. Debating whether to pick one up when they release, but I've been very happy with my G10 example.zuludelta wrote: ↑Thu Oct 27, 2022 6:13 pmI think the LT3 shares the same clip pattern with the Chinook 4 (another disco'ed model, unfortunately).
And I can confirm that the LT3LW has the same clip as the G10 LT3 (I was sent an early production sample for review)
Re: Pocket Clip Sizing/Compatibility Info
Thanks very much for taking on this project, YMMH. Strong work. Ignore the grouches and proceed with vigor!
Regards the one-screw wire clips, there are "deep" (with a U bend) and "not deep" (with an S bend) versions of that. Are they interchangeable?
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189