Kitchen Knife Sprints: Any Interest?

Discuss Spyderco's products and history.
User avatar
Holland
Member
Posts: 6767
Joined: Fri Jan 06, 2012 10:37 pm
Location: Alberta

Kitchen Knife Sprints: Any Interest?

Postby Holland » Sun Mar 24, 2019 3:45 pm

Anyone interested in spyderco sprinting the kitchen line?

I would love to buy a K04 and K05 in superbly or Hap40
-Spencer

User avatar
Spydergirl88
Member
Posts: 5460
Joined: Fri Jul 17, 2015 12:42 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby Spydergirl88 » Sun Mar 24, 2019 3:47 pm

More interested in the new kitchen collaboration line
Team Wire Clip
:spyder: :spyder: :spyder:

User avatar
Woodpuppy
Member
Posts: 1588
Joined: Wed Jun 27, 2018 6:38 pm
Location: Florida

Re: Kitchen Knife Sprints: Any Interest?

Postby Woodpuppy » Sun Mar 24, 2019 3:56 pm

Agreed. Also, I’d be interested in better handle ergos on the two utility kitchen knives.
:spyder: Current favs: M4 & CRUWEAR :spyder:

Marulaghost
Member
Posts: 295
Joined: Sun Feb 03, 2019 8:02 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby Marulaghost » Sun Mar 24, 2019 5:03 pm

Isn't the collaboration using superblue?

It's not that i think it's a bad idea. But I'm not exactly sure if it would be viable necessarily.
Not when they're focusing on new kitchen models that fill out more niches both in price ranges and styles.
Not to say something like that is impossible to happen, but as of now i think more man hours are being dedicated to becoming a name as well recognized in the kitchen as Wusthof and Shun. That's not to say there isn't already recognition, rather that there is room for growth.
I think it's brilliant that spyderco is now tackling the super low end and the luxury high end. So much in terms of quality to see here

User avatar
Spydergirl88
Member
Posts: 5460
Joined: Fri Jul 17, 2015 12:42 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby Spydergirl88 » Sun Mar 24, 2019 5:16 pm

Marulaghost wrote:
Sun Mar 24, 2019 5:03 pm
I think it's brilliant that spyderco is now tackling the super low end and the luxury high end. So much in terms of quality to see here
I agree
Team Wire Clip
:spyder: :spyder: :spyder:

TomAiello
Member
Posts: 3406
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Kitchen Knife Sprints: Any Interest?

Postby TomAiello » Mon Mar 25, 2019 3:13 am

I'd be into sprints of the low end kitchen knives too. Not sure if there is enough margin there to justify it, or how the price would end up though.

Dodge
Member
Posts: 908
Joined: Mon May 16, 2005 5:12 pm
Location: Virginia, USA, Earth

Re: Kitchen Knife Sprints: Any Interest?

Postby Dodge » Mon Mar 25, 2019 6:26 am

Maddox in h1 or bring back the sashimi?
Sprint request: Flat Iron Salt (CE w/ yellow FRN)
New knife request: Police 4 LW Salt!!!

"If you won't stand for something, you'll fall for anything"

Sumdumguy
Member
Posts: 1373
Joined: Sun Dec 03, 2017 3:51 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby Sumdumguy » Mon Mar 25, 2019 6:41 am

I just want a full set in LC200N with the Galley V and a butcher's block that accommodates all of it.

PLEASE?!?!?!?!?!?!?!

Edit: No holes in the blades, please. I understand that it's your trademark, but it does not belong on a kichen knife.

User avatar
Jazz
Member
Posts: 7323
Joined: Sun Jul 01, 2007 7:46 pm
Location: Alberta, Canada

Re: Kitchen Knife Sprints: Any Interest?

Postby Jazz » Mon Mar 25, 2019 6:49 am

If they make a 10” chef with a wide blade, I’ll think about it.
- best wishes, Jazz.

steeljustice
Member
Posts: 56
Joined: Sat Dec 29, 2018 4:45 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby steeljustice » Mon Mar 25, 2019 6:57 am

Are all Spyderco Kitchen knives Mfg. in Japan?

TomAiello
Member
Posts: 3406
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

Re: Kitchen Knife Sprints: Any Interest?

Postby TomAiello » Mon Mar 25, 2019 7:11 am

steeljustice wrote:
Mon Mar 25, 2019 6:57 am
Are all Spyderco Kitchen knives Mfg. in Japan?
Where are the Murray Carter collaborations going to be made?

User avatar
bearfacedkiller
Member
Posts: 8954
Joined: Sat Jan 04, 2014 1:22 pm
Location: hiding in the woods...

Re: Kitchen Knife Sprints: Any Interest?

Postby bearfacedkiller » Mon Mar 25, 2019 7:38 am

TomAiello wrote:
Mon Mar 25, 2019 7:11 am
steeljustice wrote:
Mon Mar 25, 2019 6:57 am
Are all Spyderco Kitchen knives Mfg. in Japan?
Where are the Murray Carter collaborations going to be made?
The new budget line is going to be made in Golden. Looks like they are going to try to compete with Dexter Russell with affordable domestic knives.

I assume that the Murray Carter knives will be made in Japan since it uses Super Blue. I am torn, they look great but they also look like they use that black/brown burled G10 which I am not a fan of. Yuck!
-Darby
sal wrote:Knife afi's are pretty far out, steel junky's more so, but "edge junky's" are just nuts. :p
SpyderEdgeForever wrote: Also, do you think a kangaroo would eat a bowl of spagetti with sauce if someone offered it to them?

User avatar
The Deacon
Member
Posts: 24932
Joined: Fri Sep 24, 2004 10:33 am
Location: Upstate SC, USA
Contact:

Re: Kitchen Knife Sprints: Any Interest?

Postby The Deacon » Mon Mar 25, 2019 7:46 am

Holland wrote:
Sun Mar 24, 2019 3:45 pm
Anyone interested in spyderco sprinting the kitchen line?

I would love to buy a K04 and K05 in superbly or Hap40

Not me. I'm perfectly happy with MBS-26 and have zero interest in non-stainless kitchen knives.

bearfacedkiller wrote:
Mon Mar 25, 2019 7:38 am
I assume that the Murray Carter knives will be made in Japan since it uses Super Blue.

Dammit, I was excited about those until I read this thread. :(
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!

steeljustice
Member
Posts: 56
Joined: Sat Dec 29, 2018 4:45 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby steeljustice » Mon Mar 25, 2019 8:03 am

I read somewhere can't remember where think it was in some other knife forum and don't know if it's true,that VG10 steel is only allowed to be used in knives blades Mfg. in Japan.

koenigsegg
Member
Posts: 1102
Joined: Sun Oct 11, 2015 5:36 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby koenigsegg » Mon Mar 25, 2019 8:56 am

steeljustice wrote:
Mon Mar 25, 2019 8:03 am
I read somewhere can't remember where think it was in some other knife forum and don't know if it's true,that VG10 steel is only allowed to be used in knives blades Mfg. in Japan.
I think they like keeping it all in Japan

There was a really good thread on the topic in the past but I'm having trouble finding it
S30V, VG10, M4, XHP, BD1, Maxamet, 204P, H1, K390, A11, Rex45, LC200N, M390

steeljustice
Member
Posts: 56
Joined: Sat Dec 29, 2018 4:45 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby steeljustice » Mon Mar 25, 2019 10:15 am

I have just gotten into sharpening Chef type knives using besides my Spyderco stones, the Japanese water stones and using the Japanese style of doing the sharping.

BigGrove
Member
Posts: 341
Joined: Fri Jul 06, 2018 12:25 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby BigGrove » Mon Mar 25, 2019 1:13 pm

Spydergirl88 wrote:
Sun Mar 24, 2019 3:47 pm
More interested in the new kitchen collaboration line
+1

RazorSharp86
Member
Posts: 293
Joined: Fri Sep 12, 2008 8:45 am

Re: Kitchen Knife Sprints: Any Interest?

Postby RazorSharp86 » Mon Mar 25, 2019 2:16 pm

I love the Spyderco kitchen knives!
But would prefer to do the sprints with their affordable line of knives.
Superblue, Hap40, LC200N, ZDP189 would all be interesting to me.

atv223
Member
Posts: 111
Joined: Sun Aug 27, 2017 5:28 pm

Re: Kitchen Knife Sprints: Any Interest?

Postby atv223 » Mon Mar 25, 2019 5:38 pm

Sumdumguy wrote:
Mon Mar 25, 2019 6:41 am
I just want a full set in LC200N with the Galley V and a butcher's block that accommodates all of it.

PLEASE?!?!?!?!?!?!?!

Edit: No holes in the blades, please. I understand that it's your trademark, but it does not belong on a kichen knife.
This! Except I want the hole. :-)

User avatar
JonLeBlanc
Member
Posts: 964
Joined: Sun May 13, 2018 8:00 am
Location: Louisiana

Re: Kitchen Knife Sprints: Any Interest?

Postby JonLeBlanc » Mon Mar 25, 2019 6:06 pm

Oh gosh, a spyderco kitchen knife in solid shirogami would be AWWWSOME, but I won't get my hopes up lol
My collection so far: 52100 Military (2); 52100 PM2 (2); 52100 Para3; Stretch2 V-Toku; KnifeWorks M4 PM2; BentoBox M390 PM2; BentoBox S90V Military; Police4 K390; S110V PM2; SS Delica AUS-6; Wayne Goddard Sprint VG-10
Wish list: Hundred Pacer; Sliverax; Mantra; 52100 PM2 SE; Kapara


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Ankerson, Bing [Bot], blues, CXXX, dogrunner, DougC-3, eRoc, Google [Bot], hambone56rx, JohnKT, jpm2, Kels73, Pelagic, prndltech, steelcity16, Vivi and 36 guests