There are two screws for the wire clip. One on the lockbar side (currently holding the clip), and one on the opposite (show) side filling in the empty hole.
Are these screws the same length?
Spydiechef Wire Clip - Screw Length
-
- Member
- Posts: 101
- Joined: Sat Jan 19, 2019 6:58 pm
-
- Member
- Posts: 328
- Joined: Fri Sep 12, 2008 8:45 am
Re: Spydiechef Wire Clip - Screw Length
Nope. Different length for these two screws. Which is unfortunate, but I suppose necessary.
-
- Member
- Posts: 101
- Joined: Sat Jan 19, 2019 6:58 pm
Re: Spydiechef Wire Clip - Screw Length
Thanks, that's what I thought. Before I sent mine in for service I had removed the clip and reinstalled the screw. It seemed the screw was too long and coming close to touching the blade. I forgot to actually compare the screws before sending it in though.RazorSharp86 wrote: ↑Fri Feb 22, 2019 11:11 amNope. Different length for these two screws. Which is unfortunate, but I suppose necessary.
Now I will be looking for another short screw.
-
- Member
- Posts: 101
- Joined: Sat Jan 19, 2019 6:58 pm
Re: Spydiechef Wire Clip - Screw Length
Called the factory outlet and they are sending me a short screw free of charge. Thanks Spyderco!