Throwback Thursday for Spyderco's
Re: Throwback Thursday for Spyderco's
Being into Spyderco for only the past year or so, this thread was a fantastic idea for those of us more on the green side of Spyderco knives. I see quite a few models I wish were still around! Thanks guys, great pics so far.
15 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut
-Rick
- Larry_Mott
- Member
- Posts: 2584
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Throwback Thursday for Spyderco's
Ok, don't stick to thursdays only then :P
Got this pair yesterday, great addition to the collection.
Got this pair yesterday, great addition to the collection.
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
Re: Throwback Thursday for Spyderco's
FRN Endela.
sal
sal
-
- Member
- Posts: 455
- Joined: Wed Aug 05, 2015 8:47 am
Re: Throwback Thursday for Spyderco's
Endela as throwback? Must have added a Flux Capacitor to the shop, or palling around with Doc Brown in his DeLorean, instead of the ZDX.
Lots of splendid old Spydies posted above, thanks for the pics, folks.
Last edited by nicked.onaut on Wed Feb 13, 2019 2:54 pm, edited 1 time in total.
Re: Throwback Thursday for Spyderco's
How much can a Koala bear?
- Larry_Mott
- Member
- Posts: 2584
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Throwback Thursday for Spyderco's
Nice Laguiole!
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
-
- Member
- Posts: 455
- Joined: Wed Aug 05, 2015 8:47 am
- Larry_Mott
- Member
- Posts: 2584
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Throwback Thursday for Spyderco's
This thursday it's time for the C53TI Herbst Ti, only Spyderco (to my knowledge) made in Solingen, Germany :)
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
Re: Throwback Thursday for Spyderco's
That old Peter Herbst along with many of these super great collaborations has made me wonder how many of these old designers might still be with us. I would love to see a JD Smith II or even a Howard Viele II for instance. And let's not forget Ed Scott's great IMPALA model.Larry_Mott wrote: ↑Thu Feb 14, 2019 2:06 amThis thursday it's time for the C53TI Herbst Ti, only Spyderco (to my knowledge) made in Solingen, Germany :)
Bob Lum's passing really bummed me out because at the time of his passing I was near a deal to buy one of his custom models. Now I wish I would have pulled the trigger a lot sooner. I'm pretty sure that Michael Walker is still doing stuff for KLOTZLI the great Swiss knife company.
Some of these past collaborations are literally timeless.
Re: Throwback Thursday for Spyderco's
Thursday over here
GB1 (but put back original scale for clipped carry)
GB1 (but put back original scale for clipped carry)
Last edited by anagarika on Thu Feb 14, 2019 10:12 am, edited 1 time in total.
Chris :spyder:
Re: Throwback Thursday for Spyderco's
That is so rare! So many ended up as seconds due to faulty locksLarry_Mott wrote: ↑Thu Feb 14, 2019 2:06 amThis thursday it's time for the C53TI Herbst Ti, only Spyderco (to my knowledge) made in Solingen, Germany :)
Last edited by GarageBoy on Mon Feb 25, 2019 10:25 am, edited 1 time in total.
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: Throwback Thursday for Spyderco's
Along the lines of several recent threads, I'm carrying a little knife and a combo edge. Both discontinued and perfect for Throwback Thursday.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
- Archimedes
- Member
- Posts: 669
- Joined: Fri Feb 20, 2015 2:39 pm
- Location: Nor Cal
Re: Throwback Thursday for Spyderco's
I am not sure if this ones been discontinued, but I have owned it for what seems like forever. Carried a bit, but not used a lot. I always liked the look of it.
- Larry_Mott
- Member
- Posts: 2584
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Throwback Thursday for Spyderco's
Don't worry, it's discontinued alright :)Archimedes wrote: ↑Thu Feb 14, 2019 2:53 pmI am not sure if this ones been discontinued, but I have owned it for what seems like forever. Carried a bit, but not used a lot. I always liked the look of it.
Wish they'd bring back that blade grind though..
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
- Larry_Mott
- Member
- Posts: 2584
- Joined: Tue Jul 14, 2015 5:00 am
- Location: Helsingborg, Sweden
Re: Throwback Thursday for Spyderco's
This is quickly becoming my favorite thread here :)
"Life is fragile - we should take better care of each other, and ourselves - every day!"
//Eva Mott 1941 - 2019. R.I.P.
//Eva Mott 1941 - 2019. R.I.P.
- Mr Blonde
- Member
- Posts: 7652
- Joined: Fri Sep 24, 2004 10:33 am
- Location: The Netherlands, Europe, Earth
- Contact:
Re: Throwback Thursday for Spyderco's
I'm going with these ones, you just got to get some red on you for Valentine's Day right?