Tanto PM2 Support Thread

Discuss Spyderco's products and history.
Brotherscinc0
Member
Posts: 15
Joined: Sat Jun 01, 2019 12:54 pm

Re: Tanto PM2 Support Thread

Postby Brotherscinc0 » Sat Jan 25, 2020 9:44 pm

I’m so pumped to see this.

PLEASE GUYS....do some in digicam and DLC and I will be a happy man

argyle1812
Member
Posts: 43
Joined: Thu Dec 14, 2017 11:08 pm

Re: Tanto PM2 Support Thread

Postby argyle1812 » Sun Jan 26, 2020 2:16 am

Any word on if this will also be in the orange Rex 45 sprint run configuration?

User avatar
Wartstein
Member
Posts: 5343
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: Tanto PM2 Support Thread

Postby Wartstein » Sun Jan 26, 2020 2:29 am

argyle1812 wrote:
Sun Jan 26, 2020 2:16 am
Any word on if this will also be in the orange Rex 45 sprint run configuration?
Since it will be a BHQ Exklusive: Probably not... :(
For now...
Top three going by pocket-time: Endura 4 in VG 10/Micarta-scales; Stretch 1 in VG 10; Endura 4 in HAP 40

User avatar
Popsickle
Member
Posts: 1615
Joined: Sat Mar 05, 2011 2:35 pm

Re: Tanto PM2 Support Thread

Postby Popsickle » Sun Jan 26, 2020 3:04 am

A few peopl are saying this is a bladehq exclusive. Are we sure they aren’t offering an exclusive version outside of the standard production model? I swore in the video they said regular production

User avatar
AlexRus
Member
Posts: 372
Joined: Fri Jan 19, 2018 10:42 am
Location: Russia, Earth

Re: Tanto PM2 Support Thread

Postby AlexRus » Sun Jan 26, 2020 4:47 am

Popsickle wrote:
Sun Jan 26, 2020 3:04 am
A few peopl are saying this is a bladehq exclusive. Are we sure they aren’t offering an exclusive version outside of the standard production model? I swore in the video they said regular production
I've heard it to be BLADEHQ exclusive, but not sure of it. Hope Sal or someone other in know will make it clear.

ABX2011
Member
Posts: 1828
Joined: Thu Oct 01, 2009 7:54 pm

Re: Tanto PM2 Support Thread

Postby ABX2011 » Sun Jan 26, 2020 7:18 am

Someone on the forum said they heard it was exclusive in a BHQ IG vid. I wasn't able to find that vid...

User avatar
Wartstein
Member
Posts: 5343
Joined: Mon Jul 02, 2018 10:06 am
Location: Salzburg, Austria, Europe

Re: Tanto PM2 Support Thread

Postby Wartstein » Sun Jan 26, 2020 7:23 am

ABX2011 wrote:
Sun Jan 26, 2020 7:18 am
Someone on the forum said they heard it was exclusive in a BHQ IG vid. I wasn't able to find that vid...

Mushroom said it was while some Livestream...
viewtopic.php?f=2&t=82700&start=160#p1394225

And Eric shows the knife only in the BHQ shot show vid, not so in the KC vid.
Top three going by pocket-time: Endura 4 in VG 10/Micarta-scales; Stretch 1 in VG 10; Endura 4 in HAP 40

ABX2011
Member
Posts: 1828
Joined: Thu Oct 01, 2009 7:54 pm

Re: Tanto PM2 Support Thread

Postby ABX2011 » Sun Jan 26, 2020 3:20 pm

Wartstein wrote:
Sun Jan 26, 2020 7:23 am
Mushroom said it was while some Livestream...
viewtopic.php?f=2&t=82700&start=160#p1394225

And Eric shows the knife only in the BHQ shot show vid, not so in the KC vid.
Thanks. At this point, I'm not convinced of anything. Would like to hear an official announcement.

User avatar
Popsickle
Member
Posts: 1615
Joined: Sat Mar 05, 2011 2:35 pm

Re: Tanto PM2 Support Thread

Postby Popsickle » Sun Jan 26, 2020 3:23 pm

I’m in for one

User avatar
Mushroom
Member
Posts: 2299
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Tanto PM2 Support Thread

Postby Mushroom » Sun Jan 26, 2020 8:50 pm

ABX2011 wrote:
Sun Jan 26, 2020 3:20 pm
Wartstein wrote:
Sun Jan 26, 2020 7:23 am
Mushroom said it was while some Livestream...
viewtopic.php?f=2&t=82700&start=160#p1394225

And Eric shows the knife only in the BHQ shot show vid, not so in the KC vid.
Thanks. At this point, I'm not convinced of anything. Would like to hear an official announcement.
One of the "Brand Specialists" (Zac) from BladeHQ said it. That's nearly as official as someone from Spyderco saying it. :)
- Nick

:spyder:

ABX2011
Member
Posts: 1828
Joined: Thu Oct 01, 2009 7:54 pm

Re: Tanto PM2 Support Thread

Postby ABX2011 » Mon Jan 27, 2020 11:42 am

Mushroom wrote:
Sun Jan 26, 2020 8:50 pm
One of the "Brand Specialists" (Zac) from BladeHQ said it. That's nearly as official as someone from Spyderco saying it. :)
I believe you but I'd like to hear it firsthand.

User avatar
PStone
Member
Posts: 1130
Joined: Thu Nov 09, 2017 7:31 pm
Location: USA Illinois

Re: Tanto PM2 Support Thread

Postby PStone » Mon Jan 27, 2020 2:38 pm

ABX2011 wrote:
Mon Jan 27, 2020 11:42 am
Mushroom wrote:
Sun Jan 26, 2020 8:50 pm
One of the "Brand Specialists" (Zac) from BladeHQ said it. That's nearly as official as someone from Spyderco saying it. :)
I believe you but I'd like to hear it firsthand.
Ditto for me. I want to hear it from Spyderco. I could however see BHQ getting exclusive rights to sell the first (x) number of them, before other dealers get them.
“In the book of life, the answers aren’t in the back.”
-Charlie Brown

Pareed414
Member
Posts: 2
Joined: Wed Jan 29, 2020 5:15 pm

Re: Tanto PM2 Support Thread

Postby Pareed414 » Wed Jan 29, 2020 5:18 pm

I have been waiting for another Lum style tanto. I will definitely add this new one to my collection (depends on the price).

Pareed414
Member
Posts: 2
Joined: Wed Jan 29, 2020 5:15 pm

Re: Tanto PM2 Support Thread

Postby Pareed414 » Wed Jan 29, 2020 5:21 pm

I would add it to my edc.

User avatar
Popsickle
Member
Posts: 1615
Joined: Sat Mar 05, 2011 2:35 pm

Re: Tanto PM2 Support Thread

Postby Popsickle » Fri Jan 31, 2020 12:20 pm

Any idea when? It sounds like soonish

Wolfy916
Member
Posts: 65
Joined: Wed Jul 18, 2018 8:56 am
Location: MN

Re: Tanto PM2 Support Thread

Postby Wolfy916 » Thu Feb 06, 2020 10:09 am

I am extremely excited for this one, on my must get list. The only question I have is do I hold out hoping for a sprint/exclusive or get the blacks30v

Cycletroll
Member
Posts: 317
Joined: Sun Oct 22, 2017 4:12 pm
Location: North Central New Mexico

Re: Tanto PM2 Support Thread

Postby Cycletroll » Thu Feb 06, 2020 11:16 am

S30v is a nice balanced steel for the first iteration.
SPY27 or Cruwear can be the "upgrade" Sprint or exclusive.
Sal, thanks for the responsiveness on this tanto project!

ABX2011
Member
Posts: 1828
Joined: Thu Oct 01, 2009 7:54 pm

Re: Tanto PM2 Support Thread

Postby ABX2011 » Sun Feb 16, 2020 8:14 am

I rewatched the BHQ SHOT vid with Eric and he said that these are coming off the production line. So I wonder if we're close to seeing these released.

User avatar
5-by-5
Member
Posts: 522
Joined: Fri Mar 24, 2017 5:12 pm
Location: Puget Sound

Re: Tanto PM2 Support Thread

Postby 5-by-5 » Sun Feb 16, 2020 9:55 am

The grinds on the 2020 shotshow vid are so much better than 2019

Doeswhateveraspidercan
Member
Posts: 2618
Joined: Tue Jul 10, 2018 6:31 pm

Re: Tanto PM2 Support Thread

Postby Doeswhateveraspidercan » Sun Feb 16, 2020 10:05 am

I would much prefer a different steel than S30V.

This is a really special design and deserves a special steel right out of the gate. This is an all day easy sell as far as design goes.

S45VN makes allot of sense as does the SPY27. S30V is dead to me have too much of it already.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], blueblur, jacala, Majestic-12 [Bot] and 24 guests