Cutlery Shoppe Para 3 exclusives

Discuss Spyderco's products and history.

Stonewash or DLC?

Shiny! I want the stonewashed version.
70
48%
Blackout makes even bright orange G10 stealthy (or at least super-cool looking), make mine DLC!
44
30%
Choosing is so hard, I'm going to try for both...
32
22%
 
Total votes: 146

User avatar
TkoK83Spy
Member
Posts: 12464
Joined: Mon Sep 17, 2018 5:32 pm
Location: Syracuse, NY

Re: Cutlery Shoppe Para 3 exclusives

#141

Post by TkoK83Spy »

$285!?!?! Nobody is going to pay that. That's insane, not even an exotic fancy new steel.
15 :bug-red 's in 10 different steels
1 - Bradford Guardian 3 / Vanadis 4E Wharnie
1 - Monterey Bay Knives Slayback Flipper / ZDP 189
1 - CRK Small Sebenza 31/Macassar Ebony Inlays
1 - CRK Large Inkosi Insingo/ Black Micarta Inlays
1 - CRK Small Sebenza 31 Insingo/Magnacut

-Rick
Extra330SC
Member
Posts: 748
Joined: Thu Aug 02, 2018 4:17 pm
Location: Encinitas, CALIFORNIA

Re: Cutlery Shoppe Para 3 exclusives

#142

Post by Extra330SC »

Got one of each in a very smooth transaction. ..thanks Cutlery Shoppe!

James

Hopefully they will do another run of the PM2 CTS-XHP DLC.
FDE
Member
Posts: 216
Joined: Mon Mar 31, 2014 8:39 pm

Re: Cutlery Shoppe Para 3 exclusives

#143

Post by FDE »

I really like the DLC and orange look but don't care for the uncoated liners. I know the reason for not coating the liners on the DLC version is it has a negative effect on the lock up or action of the knife. However, why can't they polish the locking tab and where the washers sit, after coating? Another option would be to use a fixture to where only the outer exposed edges of the liners would be coated. Of course either option would likely further increase the cost.
Cscottsss
Member
Posts: 525
Joined: Thu Aug 02, 2018 6:33 am
Location: Lexington, KY

Re: Cutlery Shoppe Para 3 exclusives

#144

Post by Cscottsss »

These lasted longer than I anticipated, 1 hour and 17 minutes. Glad I got mine in as I'm sure they won't last past today.
Joey
Member
Posts: 540
Joined: Tue Aug 07, 2018 3:35 pm

Re: Cutlery Shoppe Para 3 exclusives

#145

Post by Joey »

koenigsegg wrote:
Fri Nov 16, 2018 12:01 pm
Rutger wrote:
Fri Nov 16, 2018 11:42 am
DLC seems to be the favorite, unlike the poll in this topic. It's also the one i'm most excited about for the color combo.
Stock seems to steadily decline on both. I think they'll sell out today. 135 DLC vs 157 Satin left atm.
Because the poll says stonewashed
I was all for the stonewashed blade as well. I always wanted my burnt orange Para 3 to be DLC coated, so once I found these weren’t stonewashed I wasn’t too sad to go for the DLC instead.
CXXX
Member
Posts: 288
Joined: Mon Aug 08, 2011 7:18 pm
Location: Thompsons Station, Tennessee

Re: Cutlery Shoppe Para 3 exclusives

#146

Post by CXXX »

16-Nov-2018 10:02:55 MST Ordered both when they were available at 10 am MST. Smooth transaction with CS as always. Big thanks to Jeff for bringing his signature ORANGE to the Para 3 lineup. Pretty cool to get both versions at the same time!
AHahn20
Member
Posts: 20
Joined: Fri Feb 05, 2016 3:06 pm
Location: Pennsylvania

Re: Cutlery Shoppe Para 3 exclusives

#147

Post by AHahn20 »

What does it mean when it says "manual verification required"?
Favorite :spyder: 's: M390 Para 3, S90V Native 5, Manbug SB, USN Ladybug H1(x2)
User avatar
Lumpy620
Member
Posts: 214
Joined: Sat Jan 12, 2013 11:58 pm
Location: Massachusetts

Re: Cutlery Shoppe Para 3 exclusives

#148

Post by Lumpy620 »

AHahn20 wrote:
Fri Nov 16, 2018 2:01 pm
What does it mean when it says "manual verification required"?
For me, I had to authorize the payment with my Discover Card I used... Similar to what TkoK83Spy mentioned, I got a text alert from Discover, and had to authorize the charge. Depending on your CC issuer, could be email, text, or a phone call, YMMV.
andrewu750
Member
Posts: 93
Joined: Mon Jul 10, 2017 6:41 pm

Re: Cutlery Shoppe Para 3 exclusives

#149

Post by andrewu750 »

Wow to my surprise I woke up 3 and a half hours after they went on sale and was able to get one of each. I figured they would be sold out
Rutger
Member
Posts: 345
Joined: Sat Jan 06, 2018 12:45 pm
Location: The Netherlands

Re: Cutlery Shoppe Para 3 exclusives

#150

Post by Rutger »

Currently
DLC down to 65
Satin down to 93
koenigsegg wrote:
Fri Nov 16, 2018 12:01 pm
Rutger wrote:
Fri Nov 16, 2018 11:42 am
DLC seems to be the favorite, unlike the poll in this topic. It's also the one i'm most excited about for the color combo.
Stock seems to steadily decline on both. I think they'll sell out today. 135 DLC vs 157 Satin left atm.
Because the poll says stonewashed
Ah right i forgot about that. Ye that sucked. I wanted stonewashed so bad. I guess i can always do my own stone wash though. Throw the blade with some rocks in a box into the dryer.

I bought both versions. If i don't like one i can always sell it.
Lumpy620 wrote:
Fri Nov 16, 2018 2:16 pm
AHahn20 wrote:
Fri Nov 16, 2018 2:01 pm
What does it mean when it says "manual verification required"?
For me, I had to authorize the payment with my Discover Card I used... Similar to what TkoK83Spy mentioned, I got a text alert from Discover, and had to authorize the charge. Depending on your CC issuer, could be email, text, or a phone call, YMMV.
Mine went from "manual verification required" to "awaiting fulfillment" without any action on my side. I can see the charge on my card now as a reservation.
AHahn20
Member
Posts: 20
Joined: Fri Feb 05, 2016 3:06 pm
Location: Pennsylvania

Re: Cutlery Shoppe Para 3 exclusives

#151

Post by AHahn20 »

Ahh I see, well my order status changed to waiting for fulfillment so were good. Thanks
Favorite :spyder: 's: M390 Para 3, S90V Native 5, Manbug SB, USN Ladybug H1(x2)
Rutger
Member
Posts: 345
Joined: Sat Jan 06, 2018 12:45 pm
Location: The Netherlands

Re: Cutlery Shoppe Para 3 exclusives

#152

Post by Rutger »

Extra330SC wrote:
Fri Nov 16, 2018 12:05 pm
Hopefully they will do another run of the PM2 CTS-XHP DLC.
Lots of people asked for that. This is what they said on Instagram:
"Patience - it will happen, but not in XHP, as we’ve already done that."
SF Native
Member
Posts: 1431
Joined: Wed Aug 10, 2016 8:25 am
Location: Fairfax, Ca

Re: Cutlery Shoppe Para 3 exclusives

#153

Post by SF Native »

Well, I was hoping these would sell out in minutes and spare my wallet. But no. Still available and dlc version incoming. Glad they made these. Wanted a black and orange para for a while.
dowlf
Member
Posts: 17
Joined: Sun Oct 21, 2018 4:24 pm
Location: KS

Re: Cutlery Shoppe Para 3 exclusives

#154

Post by dowlf »

This morning the website kept giving me an error when I tried to get one, got my card charged a bunch of times and now my order status says declined. I submitted a new order, hopefully it goes through this time.
User avatar
Crux
Member
Posts: 1361
Joined: Tue Apr 24, 2018 9:29 pm
Location: North Carolina USA

Re: Cutlery Shoppe Para 3 exclusives

#155

Post by Crux »

22 different Para 3s in 2 years. :)

What in the world could 2019 hold?
Can you find it and can it cut? :eek:
Rutger
Member
Posts: 345
Joined: Sat Jan 06, 2018 12:45 pm
Location: The Netherlands

Re: Cutlery Shoppe Para 3 exclusives

#156

Post by Rutger »

Crux wrote:
Fri Nov 16, 2018 4:30 pm
22 different Para 3s in 2 years. :)
I bet it will slow down now though. We've had most of the classic PM2 sprint/exclusive combinations now. I guess we can expect a 20CV run from DLT. I'm not sure if Elmax happens again. Other than that i think we've had it all now. Still hoping for a LC200N Salt Para 3 for the 2019 catalog.

When i get these 2 i'll be at 8. I don't care for the S30V, S35VN or serrated models. The rest i'll try to collect for the steel.
I'm still missing the S90V, 52100, 204P and M390.
AHahn20
Member
Posts: 20
Joined: Fri Feb 05, 2016 3:06 pm
Location: Pennsylvania

Re: Cutlery Shoppe Para 3 exclusives

#157

Post by AHahn20 »

Does anyone know when they are expected to ship?
Favorite :spyder: 's: M390 Para 3, S90V Native 5, Manbug SB, USN Ladybug H1(x2)
User avatar
restless ghost
Member
Posts: 237
Joined: Wed Jan 20, 2016 3:27 am

Re: Cutlery Shoppe Para 3 exclusives

#158

Post by restless ghost »

They just said Monday on their IG
User avatar
Liquid Cobra
Member
Posts: 6490
Joined: Wed Jan 02, 2013 11:38 pm
Location: British Columbia, CANADA

Re: Cutlery Shoppe Para 3 exclusives

#159

Post by Liquid Cobra »

What? Apparently (according to their IG) they haven’t even received the Para 3’s yet. No wonder they haven’t shipped. I can see that they’re getting things ready, but weird to do the sale before you receive the goods.
Most recently acquired: Military 2, Paramilitary 2 Tanto x2, YoJUMBO, Swayback, Siren, DLC Yojimbo 2, Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!

For more of my pictures see my Instagram account.
@liquid_cobra
User avatar
Spydersense
Member
Posts: 1431
Joined: Mon Jan 20, 2014 5:07 pm
Location: Wilsonville, Oregon

Re: Cutlery Shoppe Para 3 exclusives

#160

Post by Spydersense »

Cscottsss wrote:
Fri Nov 16, 2018 10:25 am
Crux wrote:
Fri Nov 16, 2018 10:13 am
Spydersense wrote:
Thu Nov 15, 2018 10:41 pm
Dang! These would have to drop right when I'm short on funds. Looks like I'll be trying to trade for one on the exchange. :rolleyes:
What exchange?
I assume he's referring to BF exchange. ;)

Just about 30 minutes to go......
Indeed I was. :) Alas, I ordered a DLC one anyway. I have zero willpower. :o
Time for another :spyder:!

-Matt
Post Reply