What did you use your Spyderco for last?
Re: What did you use your Spyderco for last?
Ha! Didn’t realize they were available for preorder! Too many cool knives, too many small shoes and undies to buy...
#twindadproblems
#twindadproblems
- PeaceInOurTime
- Member
- Posts: 2179
- Joined: Sun Apr 07, 2019 7:37 am
Re: What did you use your Spyderco for last?
Haha! Yeah, my brother-in-law mentioned wanting to give me a knife as a "new father" gift so I was window shopping. I've been so tempted by the Swick, but I think I'll pursue it later. The SE ARK will likely be my next knife.
Re: What did you use your Spyderco for last?
Used the 4.5" Utility Knife for kitchen stuff.
-
- Member
- Posts: 734
- Joined: Mon Feb 04, 2019 7:57 pm
Re: What did you use your Spyderco for last?
Because I'm a the kind of dumbass who runs over his garden hose with his lawnmower, I had to use my dragonfly hawkbill to fix the stupid. The knife went thru the hose like butter and made unwrapping the hose from the blades easy. Hard to beat a serrated hawkbill for that job.
Re: What did you use your Spyderco for last?
This made my morning thanks for sharing :DNotsurewhy wrote: ↑Sun Jul 19, 2020 10:21 amBecause I'm a the kind of dumbass who runs over his garden hose with his lawnmower, I had to use my dragonfly hawkbill to fix the stupid. The knife went thru the hose like butter and made unwrapping the hose from the blades easy. Hard to beat a serrated hawkbill for that job.
- Shannon
MNOSD 0006
MNOSD 0006
- VooDooChild
- Member
- Posts: 2623
- Joined: Wed Feb 21, 2018 1:29 am
Re: What did you use your Spyderco for last?
Pretty Jalapenos
"Rome's greatest contribution to mathematics was the killing of Archimedes."
Re: What did you use your Spyderco for last?
Trimmed the plastic housing of a vga cable, used tin snips for cutting the metal lol.
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
- SpyderNut
- Member
- Posts: 8431
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Hoosier Country, USA
- Contact:
Re: What did you use your Spyderco for last?
Man, I hear you. Not too long ago, I buzzed through my electrical cord with a hedge trimmer. Saw some pretty nice sparks from that one. Whoops. :oNotsurewhy wrote: ↑Sun Jul 19, 2020 10:21 amBecause I'm a the kind of dumbass who runs over his garden hose with his lawnmower, I had to use my dragonfly hawkbill to fix the stupid. The knife went thru the hose like butter and made unwrapping the hose from the blades easy. Hard to beat a serrated hawkbill for that job.
:spyder: -Michael
"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
Re: What did you use your Spyderco for last?
Nice. Who built that laptop?Spydergirl88 wrote: ↑Tue Jul 21, 2020 9:21 amTrimmed the plastic housing of a vga cable, used tin snips for cutting the metal lol.
Re: What did you use your Spyderco for last?
Asus... It's not mine. I was helping out a friend. They can use 2 external monitors now :)Woodpuppy wrote: ↑Tue Jul 21, 2020 6:58 pmNice. Who built that laptop?Spydergirl88 wrote: ↑Tue Jul 21, 2020 9:21 amTrimmed the plastic housing of a vga cable, used tin snips for cutting the metal lol.
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: What did you use your Spyderco for last?
A Sharpmaker would do wonders at sharpening those lawnmower blades up. That way if you do it again you’ll save yourself some time cutting the hose. :D :rolleyes:Notsurewhy wrote: ↑Sun Jul 19, 2020 10:21 amBecause I'm a the kind of dumbass who runs over his garden hose with his lawnmower, I had to use my dragonfly hawkbill to fix the stupid. The knife went thru the hose like butter and made unwrapping the hose from the blades easy. Hard to beat a serrated hawkbill for that job.
Re: What did you use your Spyderco for last?
I loaned my Mantra to an engineer for him to cut up sheets of closed cell foam needed for packing crates. When he was done he said, "Wow, that's sharp!" My coworkers all chimed in, well, yeah."
I've gained a reputation for sharp knives. It's easy to keep stuff sharp with a Sharpmaker.
I've gained a reputation for sharp knives. It's easy to keep stuff sharp with a Sharpmaker.
Re: What did you use your Spyderco for last?
I slayed my daily nemesis, blister packs!!! No match for the Salt Dragonfly SE. It laughs in the face of any blister pack!!
I don’t trust people who don’t like dogs.
-
- Member
- Posts: 500
- Joined: Wed Jun 17, 2020 11:57 am
- Location: Austria / Europe
Re: What did you use your Spyderco for last?
Cut off a 3,5 feet tall thistle on my office parking place, it was so tall it was hanging into my trunk when opening the tailgate.
I used my Dragonfly !
I used my Dragonfly !
Re: What did you use your Spyderco for last?
I used my lefty PM2 for moral support to remind me that great things can come from working for my dad.
Re: What did you use your Spyderco for last?
Put a different clip on the Ladybug
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
- PeaceInOurTime
- Member
- Posts: 2179
- Joined: Sun Apr 07, 2019 7:37 am
Re: What did you use your Spyderco for last?
I meant to ask before, how did you like that pocket clip you had on the LB? And where did it come from?
Re: What did you use your Spyderco for last?
It's a wire replacement clip from Ripps garage tech, I used the dragonfly clip screws with it. It's alright, retention isn't great even on knives it's actually designed for. It doesn't have a bend like most retention clips.PeaceInOurTime wrote: ↑Sat Jul 25, 2020 9:49 amI meant to ask before, how did you like that pocket clip you had on the LB? And where did it come from?
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
- PeaceInOurTime
- Member
- Posts: 2179
- Joined: Sun Apr 07, 2019 7:37 am
Re: What did you use your Spyderco for last?
Thanks :) . A good clip for the LB sounds appealing. I hope Spyderco puts one out someday.Spydergirl88 wrote: ↑Sat Jul 25, 2020 10:05 amIt's a wire replacement clip from Ripps garage tech, I used the dragonfly clip screws with it. It's alright, retention isn't great even on knives it's actually designed for. It doesn't have a bend like most retention clips.PeaceInOurTime wrote: ↑Sat Jul 25, 2020 9:49 amI meant to ask before, how did you like that pocket clip you had on the LB? And where did it come from?
Re: What did you use your Spyderco for last?
Opened a box. Used S90v delica to open box for another s90v delica. I like the s90v delica more than a zdp delica. I prefer zdp in the smaller offerings like dragonfly and manbug/ladybug, but I like the s90v more in larger knives.