Need help with Sharpmaker
- curlyhairedboy
- Member
- Posts: 2621
- Joined: Fri Mar 18, 2016 11:01 am
- Location: Southern New England
Re: Need help with Sharpmaker
The edges need to be facing each other! :D
EDC Rotation: PITS, Damasteel Urban, Shaman, Ikuchi, Amalgam, CruCarta Shaman, Sage 5 LW, Serrated Caribbean Sheepsfoot CQI, XHP Shaman, M4/Micarta Shaman, 15v Shaman
Fixed Blades: Proficient, Magnacut Mule
Special and Sentimental: Southard, Squarehead LW, Ouroboros, Calendar Para 3 LW, 40th Anniversary Native, Ti Native, Calendar Watu, Tanto PM2
Would like to own again: CQI Caribbean Sheepsfoot PE, Watu
Wishlist: Magnacut, Shaman Sprints!
Fixed Blades: Proficient, Magnacut Mule
Special and Sentimental: Southard, Squarehead LW, Ouroboros, Calendar Para 3 LW, 40th Anniversary Native, Ti Native, Calendar Watu, Tanto PM2
Would like to own again: CQI Caribbean Sheepsfoot PE, Watu
Wishlist: Magnacut, Shaman Sprints!
Re: Need help with Sharpmaker
Clearly the issue is excessive heat build-up, I've dealt with this in the past.
You need to immerse yourself and the whole assembly in an ice bath.
You need to immerse yourself and the whole assembly in an ice bath.
:spyder:
Re: Need help with Sharpmaker
Lil Native looks Lil sharp to me
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
My top choices Natives5, Calys, C83 Persian
My top choices Natives5, Calys, C83 Persian
Re: Need help with Sharpmaker
Hi Spydergirl,
Did you take it apart?
sal
Did you take it apart?
sal
Re: Need help with Sharpmaker
yes I took it apart and I stripped the brass rods :confused:
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: Need help with Sharpmaker
Gail suggested maybe lighting candles and chanting?
sal
sal
Re: Need help with Sharpmaker
They should sell a parts kit with new brass rods! :rolleyes:Spydergirl88 wrote:yes I took it apart and I stripped the brass rods :confused:
EDIT: Oh wait...they do sell a parts kit. It's called the Sharpmaker 204 and it comes with everything you need to build a new one.
Last edited by Sharp Guy on Thu Feb 22, 2018 10:41 pm, edited 1 time in total.
Of all the things I've lost I miss my mind the most!
Re: Need help with Sharpmaker
You're *clearly* using too much pressure.
Re: Need help with Sharpmaker
spyderco should've indicated in the accompanying video not to take apart their sharpmakers. shame on you spyderco for not taking the responsibility for this problem that you created! :p
Re: Need help with Sharpmaker
You need to blow in it like a NES cartridge.
All SE all the time since 2017
~David
~David
Re: Need help with Sharpmaker
HaahaEvil D wrote:You need to blow in it like a NES cartridge.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-
- Member
- Posts: 2847
- Joined: Sat Jun 11, 2016 12:45 am
- Location: Barcelona, Spain
Re: Need help with Sharpmaker
did you turn the power button On? :confused:
Re: Need help with Sharpmaker
Thanx much Spydergirl,
More fun than I've had on this forum for a long time. :D
sal
More fun than I've had on this forum for a long time. :D
sal
Re: Need help with Sharpmaker
it's the least I can do Sal, thanks for all you do. and thanks to the fellow forumites that make this place fun
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: Need help with Sharpmaker
Do you use 87 octane gas or 91 for Sharpmaker?
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
My top choices Natives5, Calys, C83 Persian
My top choices Natives5, Calys, C83 Persian
Re: Need help with Sharpmaker
Silly girl, you should know better than to try and sharpen 4 knives at one time. Take 3 out and you should be fine. :p
Re: Need help with Sharpmaker
I siphon drip from an old gas well in the woods. if it's good enough for my old truck it's good enough for my spydies... makes them smell funny tho... and it eats through the FRN...
Spydergirl88
3 Nats, 1 Chap, 1 Sham, 1 Urb
3 Nats, 1 Chap, 1 Sham, 1 Urb
Re: Need help with Sharpmaker
You might try cleaning the whole thing with BKF first. Then add a strop.
Good one SG! Thx for some smiles. :spyder:
Good one SG! Thx for some smiles. :spyder:
- Mark
"Don't believe everything you think." -anonymous wise man
"Don't believe everything you think." -anonymous wise man
-
- Member
- Posts: 1560
- Joined: Sun Aug 28, 2005 8:57 am
- Location: ESVA
- Contact:
Re: Need help with Sharpmaker
Spydergirl88 wrote:Guys, am I doing this right!? Can't get my knives sharp using the 40 degree or 30 degree settings. Tried sharpening s30v, s90v, hap40... nothing works!!!
Please look at the picture below and see if my technique is wrong
I've been spending too much time on Instagram and Twitter, because I just tried to "like" your post :p
Also, you've got the Sharpmaker upside down. That might be your problem.
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:spyder:
:p :p :p :D
Chris
Haves: Lava, Delica 4 Sante Fe Stoneworks, Spy-DK x2,
Just say NO to lined FRN
Haves: Lava, Delica 4 Sante Fe Stoneworks, Spy-DK x2,
Just say NO to lined FRN