Shot Show surprises

Discuss Spyderco's products and history.
User avatar
thewoodpecker
Member
Posts: 382
Joined: Thu Jan 19, 2017 1:58 pm

Re: Shot Show surprises

Postby thewoodpecker » Thu Jan 25, 2018 10:22 am

Anyone else wondering why they didn't go wire clip on the Brouwer or why the clip is placed so far down the handle? Mantra 3 is interesting, hoping we see a Mantra 4. If 4V is getting into the line maybe we'll see something like the Nilakka in 4V down the line. =)
Last edited by thewoodpecker on Thu Jan 25, 2018 10:26 am, edited 1 time in total.
Spyderco Caly 3.5 Super Blue User

User avatar
thewoodpecker
Member
Posts: 382
Joined: Thu Jan 19, 2017 1:58 pm

Re: Shot Show surprises

Postby thewoodpecker » Thu Jan 25, 2018 10:26 am

DUPLICATE
Spyderco Caly 3.5 Super Blue User

User avatar
Liquid Cobra
Member
Posts: 6306
Joined: Wed Jan 02, 2013 11:38 pm
Location: British Columbia, CANADA

Re: Shot Show surprises

Postby Liquid Cobra » Thu Jan 25, 2018 10:38 am

I just watched the blade hq video again and noticed that the lil’ native backlock is linerless! Woohoo!
Most recently acquired: Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!

For more of my pictures see my Instagram account.
@liquid_cobra

User avatar
Doc Dan
Member
Posts: 8171
Joined: Thu Nov 08, 2012 4:25 am
Location: In a dimension as vast as space and as timeless as infinity.

Re: Shot Show surprises

Postby Doc Dan » Thu Jan 25, 2018 10:42 am

That lil Native back lock looks really good. I was sort of one the fence about this knife but after seeing it on the BladeHQ video I know I am going to have to have one.
I Pray Heaven to Bestow The Best of Blessing on THIS HOUSE, and on ALL that shall hereafter Inhabit it. May none but Honest and Wise Men ever rule under This Roof! (John Adams regarding the White House)

"Until we meet again, may the good Lord take a liking to you."
(Roy Rogers)


NRA Life Member
Spydernation 0050

User avatar
NickShabazz
Member
Posts: 252
Joined: Mon Aug 22, 2016 8:48 am
Contact:

Re: Shot Show surprises

Postby NickShabazz » Thu Jan 25, 2018 10:47 am

Well, looks like the Paysan is in my future. Nice CQI there!
Mourning the Slysz Bowie and loving the rest of Spyderco's gems. Check out my reviews at https://www.youtube.com/c/nickshabazz!

Tdog
Member
Posts: 1839
Joined: Sat Apr 30, 2011 7:04 pm
Location: The woods of Florida

Re: Shot Show surprises

Postby Tdog » Thu Jan 25, 2018 10:50 am

I had overlooked the Paysan, it looks like a winner. Hopefully won't be too high priced. I didn't get the Nirvana, perhaps the Paysan.

User avatar
abbazaba
Member
Posts: 3074
Joined: Mon Nov 09, 2015 3:40 pm
Location: New England

Re: Shot Show surprises

Postby abbazaba » Thu Jan 25, 2018 10:52 am

4v! That knife is going to be fun.

The Python looks much better to my eye than the Nirvana. Might actually be tempted by that one.

User avatar
p_atrick
Member
Posts: 528
Joined: Fri Jun 16, 2017 5:35 pm
Location: Boston Area

Re: Shot Show surprises

Postby p_atrick » Thu Jan 25, 2018 11:20 am

The Lil' Native back lock also has a floating pin, but the compression lock has screws on both sides. Why do you think that is? I know the Military has done away with the stop pin that has screws on both sides, so why not the compression Lil' Native?

User avatar
Spydergirl88
Member
Posts: 5830
Joined: Fri Jul 17, 2015 12:42 pm

Re: Shot Show surprises

Postby Spydergirl88 » Thu Jan 25, 2018 11:39 am

p_atrick wrote:The Lil' Native back lock also has a floating pin, but the compression lock has screws on both sides. Why do you think that is? I know the Military has done away with the stop pin that has screws on both sides, so why not the compression Lil' Native?
good question
Team Wire Clip
:spyder: :spyder: :spyder:

ThePeacent
Member
Posts: 2847
Joined: Sat Jun 11, 2016 12:45 am
Location: Barcelona, Spain

Re: Shot Show surprises

Postby ThePeacent » Thu Jan 25, 2018 12:02 pm

Condor also released a knife called "Amalgam" yesterday at SHOW.
What's up with the names? :p

God'sMyJudge
Member
Posts: 269
Joined: Fri Feb 25, 2011 2:38 pm
Location: Houston, TX

Re: Shot Show surprises

Postby God'sMyJudge » Thu Jan 25, 2018 12:52 pm

did anyone catch that glimpse of the orange h1 spyderhawk in the intro! need it.

User avatar
elena86
Member
Posts: 2654
Joined: Fri Sep 03, 2010 6:59 am
Location: Somewhere in Europe

Re: Shot Show surprises

Postby elena86 » Thu Jan 25, 2018 2:31 pm

Surfingringo wrote:
elena86 wrote:
Mushroom wrote:I really love that sheepsfoot blade on the new Rassenti! :eek:

I'm actually super excited about how many new sheepsfoot blades are in the works! Techno 2, Paysan, both clipitools!
That is not quite a sheepsfoot ...
Thankfully. Man, what a beautiful design. I like it better than the Nirvana and I’m SO happy they left off the machined texture on this one. I love the actual edge profile but I need to do some drawings to see if I can modify the top line/spine to give it a sharper tip without marring the aesthetics.
Man, I wouldn't mess with that beauty but I'm not Lance...I'm sure you'll find a way to improve the blade shape to your liking ;) I didn't pull the trigger on the Nirvana just because of the blade grind and the bead blasted finish but i'll bet my money on the Paysan regardless the price. THAT IS A SEBENZA INSINGO KILLER, mark my words :cool:
Marius

" A mind all logic is like a knife all blade. It makes the hand bleed that uses it " ( Rabindranath Tagore )

User avatar
RadioactiveSpyder
Member
Posts: 3792
Joined: Sat Mar 30, 2013 9:48 pm
Location: Lost in space

Re: Shot Show surprises

Postby RadioactiveSpyder » Thu Jan 25, 2018 2:47 pm

p_atrick wrote:The Lil' Native back lock also has a floating pin, but the compression lock has screws on both sides. Why do you think that is? I know the Military has done away with the stop pin that has screws on both sides, so why not the compression Lil' Native?
True, the PM2 and linered N5 still use the original screw design and the CQI’d Military and linerless N5 (CF/G10) now use the floating stop pins. Pretty much direct reflection of the CQI process here. Clearly they haven’t (or perhaps never will) tasked someone to CQI the comp lock stop pin (not sure I’d want them to either since it’s the primary load point).
It's better to be good than evil, but one achieves goodness at a terrific cost. ––– Stephen King

User avatar
RadioactiveSpyder
Member
Posts: 3792
Joined: Sat Mar 30, 2013 9:48 pm
Location: Lost in space

Re: Shot Show surprises

Postby RadioactiveSpyder » Thu Jan 25, 2018 2:49 pm

Oh, and...


YAY!!! New Spydies!!! Slysz and Rassenti are two of my absolute favorite collaborators, and those fixed blade Bowies, drool... :D
It's better to be good than evil, but one achieves goodness at a terrific cost. ––– Stephen King

User avatar
p_atrick
Member
Posts: 528
Joined: Fri Jun 16, 2017 5:35 pm
Location: Boston Area

Re: Shot Show surprises

Postby p_atrick » Thu Jan 25, 2018 2:52 pm

RadioactiveSpyder wrote:...Clearly they haven’t (or perhaps never will) tasked someone to CQI the comp lock stop pin (not sure I’d want them to either since it’s the primary load point).
The more I thought about it, the more I came back to this idea. But then I think that the compression lock is more or less like an inverted liner lock. So if the floating stop pin is an improvement for the Military, then... But what do I know.

User avatar
Liquid Cobra
Member
Posts: 6306
Joined: Wed Jan 02, 2013 11:38 pm
Location: British Columbia, CANADA

Re: Shot Show surprises

Postby Liquid Cobra » Thu Jan 25, 2018 3:08 pm

RadioactiveSpyder wrote:
p_atrick wrote:The Lil' Native back lock also has a floating pin, but the compression lock has screws on both sides. Why do you think that is? I know the Military has done away with the stop pin that has screws on both sides, so why not the compression Lil' Native?
True, the PM2 and linered N5 still use the original screw design and the CQI’d Military and linerless N5 (CF/G10) now use the floating stop pins. Pretty much direct reflection of the CQI process here. Clearly they haven’t (or perhaps never will) tasked someone to CQI the comp lock stop pin (not sure I’d want them to either since it’s the primary load point).
But the Para 3 has the update. :o
Most recently acquired: Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!

For more of my pictures see my Instagram account.
@liquid_cobra

User avatar
Mushroom
Member
Posts: 1984
Joined: Tue Jan 06, 2015 2:45 pm
Location: Boston, Ma. U.S.A. Earth

Re: Shot Show surprises

Postby Mushroom » Thu Jan 25, 2018 3:24 pm

Just another video of what we've seen already, but figured its worth posting.

Though, there is a good look at the Rhino as well! Also, an estimated price of roughly "$150 MSRP" from Eric!

https://www.youtube.com/watch?v=j3RFBLXRT8I
- Nick

:spyder:

mattman
Member
Posts: 1441
Joined: Mon Sep 27, 2010 1:06 pm
Location: Central NY

Re: Shot Show surprises

Postby mattman » Thu Jan 25, 2018 3:48 pm

p_atrick wrote:
RadioactiveSpyder wrote:...Clearly they haven’t (or perhaps never will) tasked someone to CQI the comp lock stop pin (not sure I’d want them to either since it’s the primary load point).
The more I thought about it, the more I came back to this idea. But then I think that the compression lock is more or less like an inverted liner lock. So if the floating stop pin is an improvement for the Military, then... But what do I know.
The compression lock is definitely *not* an "inverted liner lock"... The liner does the spring function in both, but that's where the similarity ends. The force vectors are completely different.

User avatar
toomzz
Member
Posts: 1355
Joined: Mon Aug 23, 2010 3:31 am
Location: Netherlands Earth

Re: Shot Show surprises

Postby toomzz » Thu Jan 25, 2018 4:54 pm

Nice that updated Techno! I really like its new form. I can't wait to see all the new knives and proto's in Amsterdam.....

hoimin
Member
Posts: 450
Joined: Tue Jan 21, 2014 11:39 am
Location: Toronto

Re: Shot Show surprises

Postby hoimin » Thu Jan 25, 2018 4:58 pm

thewoodpecker wrote:Anyone else wondering why they didn't go wire clip on the Brouwer or why the clip is placed so far down the handle?
Yes, I wondered the same thing. I also wouldn't mind it as a liner lock/compression lock, rather than RIL.


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: ABX2011, Ankerson, Baron Mind, Bloke, Buddafucco, Doeswhateveraspidercan, JMM, Johncjeff, Majestic-12 [Bot], MSN [Bot], pushcut, RustyIron, Theldraskien, ucfgrad93 and 26 guests