Page 3 of 15
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Mon Jan 15, 2018 10:40 pm
by Tdog
Wish they would have used a different handle material/color. While some knives look good with the jade (love my mules), I'm not fond of this on the Lum Tanto. Am I willing to spend the extra $ for custom scales in addition to the initial purchase cost? Custom knives are becoming much more attractive.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Tue Jan 16, 2018 4:41 pm
by Babalu32
I asked in the other Lum thread but;
Has there been a laminated blade liner lock before?
I was just curious if the detent ball will eat into the soft lamination and cause any effects over time?
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Tue Jan 16, 2018 6:37 pm
by MCM
Like jade. Not a fan of translucent light green though.................With a textured finish.........Gets too dirty fast........
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Tue Jan 16, 2018 8:11 pm
by Liquid Cobra
MCM wrote:Like jade. Not a fan of translucent light green though.................With a textured finish.........Gets too dirty fast........
Maybe knifeworks should do a similar run with materials you like! :D
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Tue Jan 16, 2018 8:50 pm
by SF Native
Babalu32 wrote:I asked in the other Lum thread but;
Has there been a laminated blade liner lock before?
I was just curious if the detent ball will eat into the soft lamination and cause any effects over time?
There was a lum Chinese folder in zdp. I assume it was laminated.
Mostly the laminated models have been back locks.
My impression is that the cladding may not be hard (will scratch easy) but it isn't weak.
Titanium scratches pretty easy too but those frame locks are fine.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Wed Jan 17, 2018 12:38 am
by PSquared
Can anyone that has a Lum Tanto and those other people's LFTi post a side by side comparison photo? From the images I can find on the web, they are very similar in size.
I really like the grind on the tanto compared to say the Double Bevel or LFTi grinds but I'm not sure I'm in with the natural G10 .... and very honestly, I'd have prefered VG10 but I might just bite the bullet , jump through all the Blade HQ hoops for international orders and get one. It could be a very long while before there is another sprint, particularly if it doesn't fly off the shelf.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Wed Jan 17, 2018 1:39 am
by Brock O Lee
Babalu32 wrote:I asked in the other Lum thread but;
Has there been a laminated blade liner lock before?
I was just curious if the detent ball will eat into the soft lamination and cause any effects over time?
That’s a very good point... I am curious about long term lock face wear too.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Mon Feb 05, 2018 11:05 pm
by Jrat303
I used to have a black handle with black blade lum in the early 2000’s it was the last on at their Golden Colorado shops outlet store. It was and probably still is my favorite knife I’ve owned
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Tue Feb 20, 2018 1:50 pm
by steelcity16
This is supposedly coming out by the end of the month, yet there is no one talking about it? I thought there would be more hype? What's the reason?
I will probably grab would to try, mainly because I love the Jade scales and have never had a Lum. But I really wish this one was Made in Golden and could use M4, Cruwear, and 52100. Those steels seem better suited. This one in the same DLC M4/Jade combo as the Manix and Made in Golden and I bet there would be some hype for sure!
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Tue Feb 20, 2018 1:59 pm
by RamZar
The Japanese-made models need more powdered stainless steel blades.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Wed Feb 21, 2018 1:29 am
by MMGRenovations
I'm on the fence on this one. I'm not sure how big this knife is. It almost seems like it's between a military and a paramilitary 2. The size is not a problem for me or the steel since I don't have any knives in hap40. What I don't like so much are the jade scales. I only like them with a DLC knife. Not much else to do a scale swap either. I would have preferred carbon fiber on this.
P.S.- Can someone post comparison pics?
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Wed Feb 21, 2018 1:34 am
by RamZar
With a 3.875" blade it’s a lot closer in size to the Military than ParaMilitary2.
https://www.bladehq.com/item--Spyderco- ... ife--71566
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Wed Feb 21, 2018 10:38 pm
by ohcyclist
Shockingly little discussion here with the release potentially in the next few days. No love for this one?
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Wed Feb 21, 2018 11:12 pm
by Liquid Cobra
The tip looks different than the original.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Thu Feb 22, 2018 10:45 am
by Strider
Yeah, I am likely out on this one. Just don't think I would use it. Hap40 makes me think this model is not intended to be a worker. However, I do love it on my caly 3.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Thu Feb 22, 2018 11:57 am
by abbazaba
I'm in. Wish they'd set the date already. Should we expect Tuesday at 10am MT again?
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Thu Feb 22, 2018 3:57 pm
by SpeedHoles
Yeah, I'm not too concerned with hype. I'll be getting this one.
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Thu Feb 22, 2018 3:58 pm
by SpeedHoles
Strider wrote:Yeah, I am likely out on this one. Just don't think I would use it. Hap40 makes me think this model is not intended to be a worker. However, I do love it on my caly 3.
If you don't use HSS for work, then what use is it better for?
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Thu Feb 22, 2018 4:06 pm
by moose1000
steelcity16 wrote:This is supposedly coming out by the end of the month, yet there is no one talking about it? I thought there would be more hype? What's the reason?
Butt Ugly..IMO
I will probably grab would to try, mainly because I love the Jade scales and have never had a Lum. But I really wish this one was Made in Golden and could use M4, Cruwear, and 52100. Those steels seem better suited. This one in the same DLC M4/Jade combo as the Manix and Made in Golden and I bet there would be some hype for sure!
Re: BHQ with a hap40 Lum Tanto exclusive?
Posted: Thu Feb 22, 2018 4:57 pm
by dogrunner
Strider wrote:Yeah, I am likely out on this one. Just don't think I would use it. Hap40 makes me think this model is not intended to be a worker. However, I do love it on my caly 3.
Curious why you think Hap40 makes it not a worker? I really like Hap40, which has been compared to M4, which I really like.
I'm not a fan of BHQs choice of dealer exclusive scales, but they are tolerable, at least not a flashy color, so overall, I am glad they are in the works and I'm still in! It won't replace my mili (or PM2), but I will definitely put it to work.