I wish Spyderco would make...
Re: I wish Spyderco would make...
Swick 3 XL (Same handle, double the cutting edge, LC200N)
Μanix XL Lightweight
FRN Police with LC200N (The FRN part is happening!)
Pacific Salt XL
Catcherman H1 full SE sprint
FRN folder with a 4.5-5" wharncliffe blade, FFG, lockback
Ronin 1 sprint (Big fan of the 2, never tried the original)
Μanix XL Lightweight
FRN Police with LC200N (The FRN part is happening!)
Pacific Salt XL
Catcherman H1 full SE sprint
FRN folder with a 4.5-5" wharncliffe blade, FFG, lockback
Ronin 1 sprint (Big fan of the 2, never tried the original)
Re: I wish Spyderco would make...
I'd go for both of these for sure, especially the Ronin 1 which I passed on and regretted ever since. It does need a tough steel for that tip, though. Another model I think would be a good for Cruwear, PD1, 4V etc.Vivi wrote:...
FRN folder with a 4.5-5" wharncliffe blade, FFG, lockback
Ronin 1 sprint (Big fan of the 2, never tried the original)
-
- Member
- Posts: 50
- Joined: Tue Nov 01, 2016 10:51 am
Re: I wish Spyderco would make...
Blacked out spyderedge Para 3
-
- Member
- Posts: 3719
- Joined: Tue Mar 26, 2013 6:23 pm
Re: I wish Spyderco would make...
FFG though, am I right?JD Spydo wrote:Actually I wish they would re-make the C-60 Ayoob model again>> and in SE & PE both. It's just too good of a folder to forget about. I also wish that Massad Ayoob and Sal Glesser would get together again for another one of his designs.
Re: I wish Spyderco would make...
- A regular production Yojimbo 2 with the black DLC blade and black G10 handles.
- A smaller, PM2 sized, Szabo folder.
- A factory deep carry pocket clip.
Please and thank you!
- A smaller, PM2 sized, Szabo folder.
- A factory deep carry pocket clip.
Please and thank you!
-
- Member
- Posts: 12636
- Joined: Wed Apr 16, 2014 12:59 pm
- Location: High in the Blue Ridge of NC
Re: I wish Spyderco would make...
As mentioned earlier, Lum Tanto Fixed blade in CTS-204P, and most importantly the blade longer than 4"
7" would be nice imo.
7" would be nice imo.
-
- Member
- Posts: 92
- Joined: Mon Nov 20, 2017 12:53 pm
Re: I wish Spyderco would make...
+1 on the Factory deep carry clip! in spyderwire and hourglass please!ekimox wrote:- A regular production Yojimbo 2 with the black DLC blade and black G10 handles.
- A smaller, PM2 sized, Szabo folder.
- A factory deep carry pocket clip.
Please and thank you!
:spyder: Ben,
The North Remembers.
Has (Always in flux): Shaman, Chef, Techno, M390 Para 3, Gayle Bradley 2, Manix 2 M4. Manix 2 XL, Blue Weave Domino, CF Chaparral, Vtoku2 Endura 4, D-Fly Salt Hawk SE.[/s].
Wants: Manix 2 XL CPM-M4 or 4V, Compression Lock, Tip-up Military, Yojimbo 2 XL.
The North Remembers.
Has (Always in flux): Shaman, Chef, Techno, M390 Para 3, Gayle Bradley 2, Manix 2 M4. Manix 2 XL, Blue Weave Domino, CF Chaparral, Vtoku2 Endura 4, D-Fly Salt Hawk SE.[/s].
Wants: Manix 2 XL CPM-M4 or 4V, Compression Lock, Tip-up Military, Yojimbo 2 XL.
Re: I wish Spyderco would make...
A Golden built folder with: NO CHOIL, a back lock, 3-3.5" FFG blade of simple steel. At least 4.25 of usable handle length with a classic utilitarian blade shape.
Yes, I want an American made Delica/Endura.
Please.
The Native 5 Salt gives me hope.
Yes, I want an American made Delica/Endura.
Please.
The Native 5 Salt gives me hope.
Support Knife Rights. https://kniferights.org/
Don't buy knives from EBAY or AMAZON. There are plenty of good companies that will appreciate your business and don't sell fakes.
Don't buy knives from EBAY or AMAZON. There are plenty of good companies that will appreciate your business and don't sell fakes.
Re: I wish Spyderco would make...
Love my Chinook 4!!
Can we get an all blacked out version DLC/hardware?
Can we get an all blacked out version DLC/hardware?
My response is "Just because you can't see it, doesn't mean it isn't there, it just means you can't see it". Sal G.
Re: I wish Spyderco would make...
JD, I still wonder every time you mention it, why you like that crazy forward angled blade. Looks like a nice knife if it was angled like a normal blade. I can't stand forward angled blades, so that's partly just me, I know.JD Spydo wrote:Actually I wish they would re-make the C-60 Ayoob model again>> and in SE & PE both. It's just too good of a folder to forget about. I also wish that Massad Ayoob and Sal Glesser would get together again for another one of his designs.
- best wishes, Jazz.
Re: I wish Spyderco would make...
A brand new Sal and Eric collaboration, delica/native sized, made in golden, hawkbill, CBBL.
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
Re: I wish Spyderco would make...
1. A fixed blade Shabaria, with a blade over 4 inches.
2. Sprint runs of the previous Chinook iterations.
3. The XL version of the Persian.
4. The XL version of the Schempp Bowie.
I'd like to see more Power Locks. The one on my Chinook 4 has me sold.
Of course, I'm still waiting for the Native Chief and Military 2 to be made.
2. Sprint runs of the previous Chinook iterations.
3. The XL version of the Persian.
4. The XL version of the Schempp Bowie.
I'd like to see more Power Locks. The one on my Chinook 4 has me sold.
Of course, I'm still waiting for the Native Chief and Military 2 to be made.
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
Re: I wish Spyderco would make...
So many great things coming out from Spyderco in 2018, but I still need to cast my vote once more for a Rassenti Druid.....
(Not my photos)
(Not my photos)
*Landon*sal wrote: .... even today, we design a knife from the edge out!
Re: I wish Spyderco would make...
Nice! I'm a fan of wharncliffes and that one even has a head start on becoming a proper spyderco :)xceptnl wrote:So many great things coming out from Spyderco in 2018, but I still need to cast my vote once more for a Rassenti Druid.....
...
(Not my photos)
- toxophilus
- Member
- Posts: 699
- Joined: Tue Feb 10, 2015 4:07 pm
- Location: Colorado; Earth
Re: I wish Spyderco would make...
Carbon Fiber or Pakkawood Stretch II with HAP40 or Superblue steel!
Manix in M390 steel :spyder:
Manix in M390 steel :spyder:
Last edited by toxophilus on Sat Dec 23, 2017 10:12 pm, edited 1 time in total.
Re: I wish Spyderco would make...
I would instantly buy a sliverax in m390 or in one of its equals.
Re: I wish Spyderco would make...
I would love to see a caly 4 or caly XL. Same handle shape and ergos just slightly bigger with a slightly thicker blade. FRN would be cool. A version with compression lock would be REALLY cool. I'd also be happy with just more caly 3.5 variants.
-
- Member
- Posts: 25
- Joined: Mon Nov 30, 2015 7:54 am
Re: I wish Spyderco would make...
Salt stretch in LC200N with H1 liners and hardware. Multiple color FRN options ( sold separately if need be )
and a thicker than normal titanium wire clip. I feel the stretch handle and blade ergos are better for a wider variety of outdoor activities. This would be the ultimate worry free edc !!!
and a thicker than normal titanium wire clip. I feel the stretch handle and blade ergos are better for a wider variety of outdoor activities. This would be the ultimate worry free edc !!!
:spyder: What A Great Knife ! :spyder:
-
- Member
- Posts: 25
- Joined: Mon Nov 30, 2015 7:54 am
Re: I wish Spyderco would make...
Wish #2... A rescue 79mm size and style handle with a delica size and shape blade in US made steel ( but with the finger choil to be used 50/50 with the handle). Made in Golden Colorado U.S.A. Earth.
Version #1 FRCP linerless handled lock back with a satin finished FFG in CTS -XHP or a more budget friendly American steel (maybe something new and exciting we havnt seen yet )
and a wire clip.
Version #2 3D machined G-10 ( like the Shaman ) nested milled liners, back lock with steel back spacer, tumble finished FFG in CPM-20CV with parkerized wire clip and hardware.
Version #1 FRCP linerless handled lock back with a satin finished FFG in CTS -XHP or a more budget friendly American steel (maybe something new and exciting we havnt seen yet )
and a wire clip.
Version #2 3D machined G-10 ( like the Shaman ) nested milled liners, back lock with steel back spacer, tumble finished FFG in CPM-20CV with parkerized wire clip and hardware.
:spyder: What A Great Knife ! :spyder: