Thunder Ranch Endura?
- Dr. Snubnose
- Member
- Posts: 8799
- Joined: Sat Mar 05, 2005 10:54 pm
- Location: NewYork
Thunder Ranch Endura?
Just purchased an old school but, NIB 1997 Endura SE for my pocket in AUS 8, SekiJapan. It has an engraved Logo of Thunder Ranch (the Firearms Academy owned by Clint Smith in Oregon) on the blade. So I'm looking for further info from my Spyderco bros, please shed some light if you can. And allow me a few questions....The Logo....you think it's something that Thunder Ranch engraved on with a limited amount of purchased Endura, (possibly for sale or gifts from Thunder Ranch), or is this something that Spyderco might do for a company, in house? I know that Spyderco always has a special edition in the line up like for instance forum knives or special commemorative military pieces and they are so engraved. I am not aware of
Spyderco doing any (for lack of better terminology) "branded engravings" but I could be way wrong so please enlighten me. Anybody have any additional info on the "Thunder Ranch Endura" I would greatly appreciate any info. I had to chuckle when the person I purchased the knife from called it a Spyderco Thunder Ranch. Thanks in advance Doc:)
Spyderco doing any (for lack of better terminology) "branded engravings" but I could be way wrong so please enlighten me. Anybody have any additional info on the "Thunder Ranch Endura" I would greatly appreciate any info. I had to chuckle when the person I purchased the knife from called it a Spyderco Thunder Ranch. Thanks in advance Doc:)
- jabba359
- Member
- Posts: 4958
- Joined: Fri Feb 10, 2006 11:07 pm
- Location: North Hollywood, CA U.S.A. Earth
- Contact:
Re: Thunder Ranch Endura?
I don't have any particular insight into this exact variation, but Spyderco has done branded engravings in the past, such as the C35 Q PRCA version, which featured specific laser engraving for them (in addition to the custom laser cut blade).
In fact, while not exactly laser engraving (since they were laser cut), the C35 Q lineup consisted of over 100 branded variations, so it seems like branded engravings on other models at that time wouldn't be unexpected. Even today, Spyderco continues to do custom laser branding, with the 106.7 KBPI Manix 2 being the most recent one I can think of.
In fact, while not exactly laser engraving (since they were laser cut), the C35 Q lineup consisted of over 100 branded variations, so it seems like branded engravings on other models at that time wouldn't be unexpected. Even today, Spyderco continues to do custom laser branding, with the 106.7 KBPI Manix 2 being the most recent one I can think of.
Re: Thunder Ranch Endura?
There is the "Never Summer" Native 5
-Matt a.k.a. Lo_Que, loadedquestions135 I ❤ The P'KAL
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"The world of edges has a small doorway in, but opens into a cavern that is both wide and deep." -sal
"Ghost hunters scope the edge." -sal
-
- Member
- Posts: 3719
- Joined: Tue Mar 26, 2013 6:23 pm
Re: Thunder Ranch Endura?
Pics of TR Endura please!!
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: Thunder Ranch Endura?
It's possible that Thunder Ranch ordered a number of Spyderco knives engraved with their logo, either as "issue" items for employees, gifts for employees, or for resale. Spyderco has offered laser engraving services for at least 20 years, so the engraving could have been done by them, but it also could have been done aftermarket. Pretty sure anyone can still purchase one or more knives from Spyderco and have them engraved. Could swear there's at least one Spyderco catalog showing knives engraved as gifts for someone's wedding party.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
-
- Member
- Posts: 3719
- Joined: Tue Mar 26, 2013 6:23 pm
Re: Thunder Ranch Endura?
Thunder Ranch has a cool logo, TR with a lightening bolt and I always read Clint's articles in G&A back in the day.
-
- Member
- Posts: 455
- Joined: Wed Aug 05, 2015 8:47 am
Re: Thunder Ranch Endura?
That's a knife from TR's Texas days, in '97. Clint had a small shop /pro-shop where one could buy TR-branded items, along with non-branded. Mostly FA-related, e.g. holsters, mag carriers, cups/caps/shirts etc, along with non-branded items (limited inventory). I don't recall seeing any TR Spydies, but they probably didn't stick around long.
Would be worth a phone call.
While T Ranch has been in Oregon for more than a dozen years, Clint and staff do visit the old TR-Tx range (@Flagler Ranch) for training courses from time to time during winter months when Oregon has inclement weather (e.g. when one must calculate snowdrift vs. wind drift).
That's a nice knife you have there.
kind regards,
nicked.onaut
Would be worth a phone call.
While T Ranch has been in Oregon for more than a dozen years, Clint and staff do visit the old TR-Tx range (@Flagler Ranch) for training courses from time to time during winter months when Oregon has inclement weather (e.g. when one must calculate snowdrift vs. wind drift).
That's a nice knife you have there.
kind regards,
nicked.onaut
- Dr. Snubnose
- Member
- Posts: 8799
- Joined: Sat Mar 05, 2005 10:54 pm
- Location: NewYork
Re: Thunder Ranch Endura?
Thanks guys for the info I'll post a pic as soon as I have it in hand....Doc:)
- Dr. Snubnose
- Member
- Posts: 8799
- Joined: Sat Mar 05, 2005 10:54 pm
- Location: NewYork
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
Re: Thunder Ranch Endura?
Nice Endura, it looks brand spanking new. I'm going to guess the engraving was done by someone other than Spyderco. I say that because, to the best of my knowledge, Spyderco has only ever offered custom laser engraving and, in all the examples I've ever seen, the engraved areas were blackened/darkened.
However, I could be wrong, so calling Thunder Ranch as nicked.onaut suggested might be a good idea.
However, I could be wrong, so calling Thunder Ranch as nicked.onaut suggested might be a good idea.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
Re: Thunder Ranch Endura?
Dr.Snubnose,
That is one fantastic knife!!! I tell you what,send it to me to check it out more thoroughly and I will return it to you.......sometime later!
Now to have some Thunder Ranch guns to go along with that knife!!!!
Top Dog
That is one fantastic knife!!! I tell you what,send it to me to check it out more thoroughly and I will return it to you.......sometime later!
Now to have some Thunder Ranch guns to go along with that knife!!!!
Top Dog
- farnorthdan
- Member
- Posts: 4409
- Joined: Wed Apr 02, 2014 11:32 pm
Re: Thunder Ranch Endura?
Happy to be part of this great forum and group of down to earth spyderco addicts, Thanks Sal and gang.
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
My Grails: Lum Tanto folder sprint, Sprint Persian(red), Captain, Manix 2 (M4), SB MT, PM2 M390, CF dodo, Manix2 (CF S90V),Manix2 XL S90V, Zowada CF Balance Rassenti Nivarna, Lil' Nilakka, Tuff, Police 4, Chinook 4, Caly HAP40 52100 Military, S110V Military, Any/All PM2 & Military sprints/exclusives I can get my grubby hands on :) :spyder: :) :spyder: :)
"We may look curious, homely, whatever, but we'll never be called unusable or undependable."
- Dr. Snubnose
- Member
- Posts: 8799
- Joined: Sat Mar 05, 2005 10:54 pm
- Location: NewYork
-
- Member
- Posts: 3719
- Joined: Tue Mar 26, 2013 6:23 pm
Re: Thunder Ranch Endura?
That is really badarse and if it had a real pocket clip I might try to buy it off of you! Really cool piece as you rebuild your collection
- Dr. Snubnose
- Member
- Posts: 8799
- Joined: Sat Mar 05, 2005 10:54 pm
- Location: NewYork
Re: Thunder Ranch Endura?
To tell you the truth...I absolutely adore the old style integral clip.... Never lost a spyderco from the pocket with one. Just the other day my sweatshirt bottom kept lifting my Native right out the pocket. Talk about an unreal pocket clip... Hmmm... Not to worry the Endura replaces the Native. Doc:)twinboysdad wrote:That is really badarse and if it had a real pocket clip I might try to buy it off of you! Really cool piece as you rebuild your collection
-
- Member
- Posts: 3719
- Joined: Tue Mar 26, 2013 6:23 pm
Re: Thunder Ranch Endura?
Agree on retention I just broke them easily!Dr. Snubnose wrote:To tell you the truth...I absolutely adore the old style integral clip.... Never lost a spyderco from the pocket with one. Just the other day my sweatshirt bottom kept lifting my Native right out the pocket. Talk about an unreal pocket clip... Hmmm... Not to worry the Endura replaces the Native. Doc:)twinboysdad wrote:That is really badarse and if it had a real pocket clip I might try to buy it off of you! Really cool piece as you rebuild your collection