Maxamet PM2, Let's get this done!!!
- SpyderPhreak
- Member
- Posts: 214
- Joined: Thu Aug 04, 2016 9:29 am
- Location: More than a mile high, CO!
Maxamet PM2, Let's get this done!!!
Who's with me? :D
I will buy multiples if this knife is made!!! :cool: Sal, what would it take to get this done?
I will buy multiples if this knife is made!!! :cool: Sal, what would it take to get this done?
"Engineers don't idle well."
Thank you to our Veterans!
Thank you to our Veterans!
Re: Maxamet PM2, Let's get this done!!!
I think that would be great, and they would sell a lot of them. I've been interested in the LW Manix 2 version but not enough to pay the price. But I would probably buy a PM2 just because.
Re: Maxamet PM2, Let's get this done!!!
I bet they're already planning that one. I wouldn't be surprised if we get a Maxamet PM2 sooner than later. :)
:spyder: Spyderco fan and collector since 1991. :spyder:
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
Re: Maxamet PM2, Let's get this done!!!
Sal commented this: the sheet of Maxamet available thinner than PM2 required
Re: Maxamet PM2, Let's get this done!!!
The PM2 platform is so likeable, they could sell one with a blade made from silly putty. So, MAXAMET? Sign me up!
- Johnnie1801
- Member
- Posts: 2219
- Joined: Sat Apr 26, 2014 10:29 am
- Location: Europe
Re: Maxamet PM2, Let's get this done!!!
Eric stated in one of the SHOT Show videos that Maxamet will come to all Golden models just like S110V. They'll start with the lightweight models and then the G10 models later. Just be patient :)
Currently enjoying Spyderco's in - S30V, VG10, Super Blue, Cruwear x4, CTS XHP, S110V x2, M4 x3, S35VN, CTS 204P x2, S90V, HAP 40, K390, RWL34, MAXAMET, ZDP 189, REX 45
Jon
Jon
Re: Maxamet PM2, Let's get this done!!!
I would buy it. Maxamet has been an incredible steel IMO.
- SpyderPhreak
- Member
- Posts: 214
- Joined: Thu Aug 04, 2016 9:29 am
- Location: More than a mile high, CO!
Re: Maxamet PM2, Let's get this done!!!
Bump to the top. Hoping maybe to get Sal's input... :spyder:
"Engineers don't idle well."
Thank you to our Veterans!
Thank you to our Veterans!
- SpyderPhreak
- Member
- Posts: 214
- Joined: Thu Aug 04, 2016 9:29 am
- Location: More than a mile high, CO!
Re: Maxamet PM2, Let's get this done!!!
Got a link maybe? I hadn't seen that anywhere.vvs wrote:Sal commented this: the sheet of Maxamet available thinner than PM2 required
"Engineers don't idle well."
Thank you to our Veterans!
Thank you to our Veterans!
Re: Maxamet PM2, Let's get this done!!!
Put me down for at least 2 pls...
Re: Maxamet PM2, Let's get this done!!!
Seems inevitable. Even if it didn't make it to full production for whatever reason, it seems like a sprint would happen eventually.
Re: Maxamet PM2, Let's get this done!!!
Does that mean we'll see a Maxamet UKPK?Johnnie1801 wrote:Eric stated in one of the SHOT Show videos that Maxamet will come to all Golden models just like S110V. They'll start with the lightweight models and then the G10 models later. Just be patient :)
Re: Maxamet PM2, Let's get this done!!!
Similarly, when I spoke with Eric at The Gathering in Sept. he said there were 4 Golden models already planned for Maxamet at that time. Inside info aside... considering we've seen PM2 sprint runs in roughly 150,000,000 +/- :p different steels it's impossible to imagine we won't get a Maxamet sprint. I think Jonnie1801's advice is spot-on...just be patient. :)Johnnie1801 wrote:Eric stated in one of the SHOT Show videos that Maxamet will come to all Golden models just like S110V. They'll start with the lightweight models and then the G10 models later. Just be patient :)
:spyder: Spyderco fan and collector since 1991. :spyder:
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
Father of 2, nature explorer, custom knife maker.
@ckc_knifemaker on Instagram.
- Johnnie1801
- Member
- Posts: 2219
- Joined: Sat Apr 26, 2014 10:29 am
- Location: Europe
Re: Maxamet PM2, Let's get this done!!!
I hope so Tom, the s110v is only just coming out after about 2 years after the lw Manix so there might be a bit of a wait though. Here's what Eric said (fast forward to just past 8mins)TomAiello wrote:
Does that mean we'll see a Maxamet UKPK?
https://youtu.be/D9Iq15zSnl0?t=485
Currently enjoying Spyderco's in - S30V, VG10, Super Blue, Cruwear x4, CTS XHP, S110V x2, M4 x3, S35VN, CTS 204P x2, S90V, HAP 40, K390, RWL34, MAXAMET, ZDP 189, REX 45
Jon
Jon
-
- Member
- Posts: 296
- Joined: Thu Sep 12, 2013 8:59 pm
Re: Maxamet PM2, Let's get this done!!!
Maybe we should be discussing handle material and color at this point and try to sway our friends in Golden to produce what we are looking for! My vote would be light grey or peel ply CF. Although CF might make this one a bit unattainable for some due to cost.
- Liquid Cobra
- Member
- Posts: 6491
- Joined: Wed Jan 02, 2013 11:38 pm
- Location: British Columbia, CANADA
Re: Maxamet PM2, Let's get this done!!!
I like the way you think. Here's hoping this happens! After watching the video above it certainly looks like it will.TomAiello wrote:Does that mean we'll see a Maxamet UKPK?Johnnie1801 wrote:Eric stated in one of the SHOT Show videos that Maxamet will come to all Golden models just like S110V. They'll start with the lightweight models and then the G10 models later. Just be patient :)
Most recently acquired: Military 2, Paramilitary 2 Tanto x2, YoJUMBO, Swayback, Siren, DLC Yojimbo 2, Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
- SpyderPhreak
- Member
- Posts: 214
- Joined: Thu Aug 04, 2016 9:29 am
- Location: More than a mile high, CO!
Re: Maxamet PM2, Let's get this done!!!
Bumping the thread in hopes that maybe Sal might chime in (here or on BF). :D
Maxamet PM2!!! :cool: :spyder:
Maxamet PM2!!! :cool: :spyder:
"Engineers don't idle well."
Thank you to our Veterans!
Thank you to our Veterans!