Fully serrated PM2 comming soon

Discuss Spyderco's products and history.
User avatar
ZrowsN1s
Member
Posts: 5015
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Fully serrated PM2 comming soon

Postby ZrowsN1s » Wed Dec 21, 2016 2:45 pm

Hello fellow forum dwellers. I was just looking at Blade HQ's "Comming Soon" section, and noticed that an s30V pm2 with FULL serrations is on the list. yay. Lot of nice knives comming out next year, I'm already doing budget math to figure out how many I can buy when they actually drop, otherwise you pay through the nose on the secondary market. So far I've got my eye on the all black karahawk, and the Hap 40 caly3, and a few other maybe's.
I ❤ The POLICE :spyder:

User avatar
Tyrdle
Member
Posts: 152
Joined: Tue Dec 29, 2015 8:32 am
Location: MD
Contact:

Re: Fully serrated PM2 comming soon

Postby Tyrdle » Wed Dec 21, 2016 4:18 pm

Yep, I'm really looking forward to the Advocate and Rhino!
:spyder: Turtles can have knives too, right? :spyder:
Aus-8 Delica 1 ATS-55 Endura UK Penknife
Positron Mamba Blurple PM2

twinboysdad
Member
Posts: 2984
Joined: Tue Mar 26, 2013 6:23 pm

Re: Fully serrated PM2 comming soon

Postby twinboysdad » Thu Dec 22, 2016 1:22 pm

All y'all that begged for this better step up! Lots of other SE models are counting on you

JD Spydo
Member
Posts: 19527
Joined: Tue Sep 28, 2004 7:53 pm
Location: Blue Springs, Missouri

Re: Fully serrated PM2 comming soon

Postby JD Spydo » Thu Dec 22, 2016 4:48 pm

That's great news and I'm glad to hear it. My boss's son is a huge fan of the PM 2 and I plan on telling him about it tonight. But I won't be anywhere near content until they also do the C-36 Military in Spyderedge as well. And I don't even care if they dig out some old 440V ( S60V) bar stock to do them with. Because 440V is a great Spyderedged steel anyway. But the C-36 Military is truly a crocodile of a knife in Spyderedge.

But I'm really glad to hear this for all you PM 2 fans and I know my boss's son is going to want one really bad.

Zen
Member
Posts: 33
Joined: Sun Nov 27, 2016 7:52 pm

Re: Fully serrated PM2 comming soon

Postby Zen » Thu Dec 22, 2016 6:32 pm

Edit: Got it totaly wrong :o sry
Last edited by Zen on Wed Dec 28, 2016 5:25 pm, edited 1 time in total.

Studey
Member
Posts: 579
Joined: Tue Oct 12, 2010 10:54 pm
Location: Indiana

Re: Fully serrated PM2 comming soon

Postby Studey » Thu Dec 22, 2016 6:44 pm

Zen wrote:Are there any plans on the PM2 as plain edge or spyderedge? This would be realy nice. Especially with the edge lengh it is complete legal in germany to carry.
What? We're discussing the PM2 Spyderedge that's coming out.

Zen
Member
Posts: 33
Joined: Sun Nov 27, 2016 7:52 pm

Re: Fully serrated PM2 comming soon

Postby Zen » Thu Dec 22, 2016 7:11 pm

Ah sorry I ment - if half serrated and plain edge is planned.

User avatar
J32A2
Member
Posts: 397
Joined: Sat Dec 09, 2006 7:04 pm
Location: Arizona

Re: Fully serrated PM2 comming soon

Postby J32A2 » Thu Dec 22, 2016 7:32 pm

Forum members don't let forum members do combo edges.

User avatar
Halfneck
Member
Posts: 1790
Joined: Fri Dec 23, 2005 8:51 am
Location: Calhoun, Georgia.

Re: Fully serrated PM2 comming soon

Postby Halfneck » Thu Dec 22, 2016 8:08 pm

Been hoping they do the SE PM2. Had an original SE ParaMilitary, but the 2 version's ergonomics are way better in my hand.

zhyla
Member
Posts: 1656
Joined: Tue Apr 20, 2010 2:12 pm

Re: Fully serrated PM2 comming soon

Postby zhyla » Thu Dec 22, 2016 9:30 pm

Whoa... unlike most knife hoarders I've never owned a PM2. This pretty much pushes me over the edge.

osprey
Member
Posts: 102
Joined: Tue Mar 24, 2015 3:41 pm
Location: Portland, ME, USA

Re: Fully serrated PM2 comming soon

Postby osprey » Fri Dec 23, 2016 12:11 pm

This is on my list for sure, but it would jump to the top if it wasn't S30V. Perhaps someday there will be a FRN PM2 SE in BD1 - that would make an excellent 'beater' that I wouldn't be opposed to using for dirty work.

zhyla
Member
Posts: 1656
Joined: Tue Apr 20, 2010 2:12 pm

Re: Fully serrated PM2 comming soon

Postby zhyla » Fri Dec 23, 2016 4:31 pm

BD1 is a fine budget steel, but why that over S30v?

User avatar
ZrowsN1s
Member
Posts: 5015
Joined: Sat Jan 30, 2016 5:08 pm
Location: San Diego, California USA

Re: Fully serrated PM2 comming soon

Postby ZrowsN1s » Fri Dec 23, 2016 4:56 pm

J32A2 wrote:Forum members don't let forum members do combo edges.
That made me laugh. I'd usually agree, but I just saw that sweet red and black LC200N Native 5...
I ❤ The POLICE :spyder:

osprey
Member
Posts: 102
Joined: Tue Mar 24, 2015 3:41 pm
Location: Portland, ME, USA

Re: Fully serrated PM2 comming soon

Postby osprey » Fri Dec 23, 2016 7:04 pm

zhyla wrote:BD1 is a fine budget steel, but why that over S30v?
Cost and ease of sharpening

zhyla
Member
Posts: 1656
Joined: Tue Apr 20, 2010 2:12 pm

Re: Fully serrated PM2 comming soon

Postby zhyla » Sat Dec 24, 2016 1:45 pm

osprey wrote:
zhyla wrote:BD1 is a fine budget steel, but why that over S30v?
Cost and ease of sharpening
I don't think you'll need to sharpen it very often :)

Bill1170
Member
Posts: 2056
Joined: Tue Oct 20, 2009 7:34 pm
Location: San Diego North County

Re: Fully serrated PM2 comming soon

Postby Bill1170 » Sat Dec 24, 2016 11:23 pm

Do we know how LC200N fares in Spyderedge? A Golden-made PM2 Salt in SE would be fantastic.

WCC
Member
Posts: 149
Joined: Wed Aug 05, 2015 2:19 am

Re: Fully serrated PM2 comming soon

Postby WCC » Sun Dec 25, 2016 9:59 am

Another must-have and I am truely thankful that Sal decided to give in to out constant nagging! :-)

BTG
Member
Posts: 1004
Joined: Sat Jan 03, 2015 2:14 pm
Location: Norcal

Re: Fully serrated PM2 comming soon

Postby BTG » Tue Dec 27, 2016 12:21 pm

Don't know if it's been mentioned, but was just looking at spydiewiki....and it's showing 2 PM2 Sprints to be released in 2017....both with 52100 steel...1 plainedge...1 serrated....

Zen
Member
Posts: 33
Joined: Sun Nov 27, 2016 7:52 pm

Re: Fully serrated PM2 comming soon

Postby Zen » Tue Dec 27, 2016 12:47 pm

BTG wrote:Don't know if it's been mentioned, but was just looking at spydiewiki....and it's showing 2 PM2 Sprints to be released in 2017....both with 52100 steel...1 plainedge...1 serrated....
Very intresting. I am trying to find more infos about the 52100 steel right now. How is it compared to H1? What a pricerange will a such a sprintrun have?

User avatar
Joris Mo
Member
Posts: 1073
Joined: Wed Jun 01, 2011 6:51 am
Location: Amsterdam, NL.

Re: Fully serrated PM2 comming soon

Postby Joris Mo » Tue Dec 27, 2016 1:12 pm

osprey wrote:This is on my list for sure, but it would jump to the top if it wasn't S30V. Perhaps someday there will be a FRN PM2 SE in BD1 - that would make an excellent 'beater' that I wouldn't be opposed to using for dirty work.
That would make for a great beater knife! Would love some more FRN versions anyway.

A SE 52100 sounds very interesting as well! Has there ever been a Spydie edged non stainless blade before?

I'll take a Cruwear FRN SE Military as well! :D
(preferably as production run so people will actually use them as the great beaters they'd be..)


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], Cambertree, captnvegtble, dj moonbat, Google [Bot], jensh, Lumpy, Majestic-12 [Bot], Sumdumguy and 52 guests