Why there is no factory deep carry clip...

Discuss Spyderco's products and history.
Post Reply
User avatar
tap78
Member
Posts: 514
Joined: Thu Mar 01, 2012 1:45 pm
Location: Europe PL

Why there is no factory deep carry clip...

#1

Post by tap78 »

... a replacement for 3 screws hourglass clip?
Why we should get a third-party solutions?

:)

Image
My spyder:'s: Military Camo, Paramilitary 2 CTS-XHP Orange, Paramilitary 2 CTS-204P Green, Endura 4 ZDP-189 ComboEdge BRG, Endura 4 ZDP-189 FFG BRG, Manix 2 Lightweight Blue, Caly 3 G-10, Salt 1 Yellow SE C88SYL, Ulize, Manix I C95, Manix 2 XL S90v CF, Delica 4 CE Black C11PCBBK, Manix 2 154CM, Military All Black C36GPBK, Stretch SE C90SBK Black FRN, Caly3 CF ZDP-189/420J2, Sage 3 BoltLock CF, Gayle Bradley C134CFP, Squarehead C193TIP, Pacific Salt Yellow SE C91SYL, Pacific Salt Black C91PBK, Ladybug 3 Salt LYL3, Stretch CF ZDP-189 C90CF, Lum Large Chinese Folder C143G, Perrin Street Bowie FB04PBB, Mantra Titanium C202TI, Farid K-2 Titanium C185TI, Para 3 C223GPGYCW Para 3 Cruwear
Top
BadFish
Member
Posts: 488
Joined: Sat Sep 03, 2011 1:20 am

#2

Post by BadFish »

Is that a bench made clip on a spyderco... I don't have the right words for this
~~~~ USn Catcherman ~~~~ Tasman Se ~~~~ Centofante 3 ~~~~ UKPK blue SE ~~~~ Goddard OD Sprint Pe ~~~~ Ambitious Pe blue~~~~ Zdp Ladybug ~~~~ Manix 2 lwt Pe ~~~~ Delica orange Pe ~~~~ Swick 3 fb ~~~~ Native brown xhp ~~~~ Persian 2 ~~~~ Tenacious green ps ~~~~ Drangonfly Sb ~~~~
Top
User avatar
tap78
Member
Posts: 514
Joined: Thu Mar 01, 2012 1:45 pm
Location: Europe PL

#3

Post by tap78 »

I have the right words: "the best from both worlds" :P
My spyder:'s: Military Camo, Paramilitary 2 CTS-XHP Orange, Paramilitary 2 CTS-204P Green, Endura 4 ZDP-189 ComboEdge BRG, Endura 4 ZDP-189 FFG BRG, Manix 2 Lightweight Blue, Caly 3 G-10, Salt 1 Yellow SE C88SYL, Ulize, Manix I C95, Manix 2 XL S90v CF, Delica 4 CE Black C11PCBBK, Manix 2 154CM, Military All Black C36GPBK, Stretch SE C90SBK Black FRN, Caly3 CF ZDP-189/420J2, Sage 3 BoltLock CF, Gayle Bradley C134CFP, Squarehead C193TIP, Pacific Salt Yellow SE C91SYL, Pacific Salt Black C91PBK, Ladybug 3 Salt LYL3, Stretch CF ZDP-189 C90CF, Lum Large Chinese Folder C143G, Perrin Street Bowie FB04PBB, Mantra Titanium C202TI, Farid K-2 Titanium C185TI, Para 3 C223GPGYCW Para 3 Cruwear
Top
User avatar
Spydersense
Member
Posts: 1431
Joined: Mon Jan 20, 2014 5:07 pm
Location: Wilsonville, Oregon

#4

Post by Spydersense »

tap78 wrote:I have the right words: "the best from both worlds" :P
^^Exactly
Time for another :spyder:!

-Matt
Top
User avatar
Holland
Member
Posts: 7567
Joined: Fri Jan 06, 2012 10:37 pm
Location: Alberta

#5

Post by Holland »

I definitely think spyderco should start selling deep carry clips. my delica would get carried twice as much if it sported one
-Spencer

Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Top
User avatar
timlara
Member
Posts: 1447
Joined: Fri Sep 24, 2004 10:33 am
Location: Lakewood, CO

#6

Post by timlara »

AAAARRGHHH MY EYES, MY EYES!!!! ;)

I will admit that's a nice clip, though...
Top
User avatar
NoFair
Member
Posts: 2040
Joined: Mon Jul 24, 2006 3:23 pm
Location: Norway

#7

Post by NoFair »

The exact place to put the fold varies a bit from model to model and tip up/down so it is hard to make a perfect one that isn't custom.

Nice clip, shame about the insect ;)
Top
User avatar
Spydersense
Member
Posts: 1431
Joined: Mon Jan 20, 2014 5:07 pm
Location: Wilsonville, Oregon

#8

Post by Spydersense »

I need a deep carry clip for my Domino.
Time for another :spyder:!

-Matt
Top
User avatar
Blerv
Member
Posts: 11833
Joined: Mon May 04, 2009 11:24 am

#9

Post by Blerv »

Because the mid-carry hourglass clip works really well for non-discrete models?
Top
User avatar
Sully
Member
Posts: 214
Joined: Mon Feb 24, 2014 3:03 pm
Location: Island of Misfit Toys

#10

Post by Sully »

tap78 wrote:I have the right words: "the best from both worlds" :P
Strong point. Made Iconel-625 strong with that imagery of a butterfly on top of a Spydie. The Spydeep Clip™ -- it's time has come.
“Damned infernal gizmo. My kingdom for a left-handed can opener!" — Mr. Burns, The Simpsons

Thank you, Mr. Sal Glesser ... and Mrs. Gail Glesser![/b][/color]
Top
User avatar
Buendia518
Member
Posts: 405
Joined: Tue Apr 09, 2013 7:51 pm

#11

Post by Buendia518 »

NoFair wrote:The exact place to put the fold varies a bit from model to model and tip up/down so it is hard to make a perfect one that isn't custom.
That's a very good point that I never considered.

Blerv wrote:Because the mid-carry hourglass clip works really well for non-discrete models?
Agreed, and the hourglass clips tend to fit right in the palm. It wouldn't always be feasible to have a comfortable grip with either of two clips.

I've swapped that same deep carry benchmade clip on some axis lock folders and it was fun for a while but for me it wasn't worth the comfort trade-off.
Top
User avatar
sharpguitarist
Member
Posts: 1179
Joined: Sat Mar 13, 2010 11:34 am
Location: east tn.

#12

Post by sharpguitarist »

Hey guys,
You know that spyders catch and devour butterflies all the time. :D :eek: ;)
Later,
Don
Everyone's entitled to their own opinion, even if it is wrong.:rolleyes:
Top
Cameron
Member
Posts: 319
Joined: Tue Feb 08, 2005 3:32 pm
Location: Colorado & New Zealand

#13

Post by Cameron »

I would buy a bunch of them...
Bradley Folder 2 CPM M4
Military ​​​CTS XHP​ - CPM​ ​Cru​-​wear​
Para Military 2​ CTS​ XHP - CTS 204P
Manix 2 CTS XHP - CPM​ ​Cru​-​wear​ - CPM​ M4
Top
User avatar
tap78
Member
Posts: 514
Joined: Thu Mar 01, 2012 1:45 pm
Location: Europe PL

#14

Post by tap78 »

:)

I think that if Spyderco team have designed such deep carry clip, it would be highly ergonomic and universal.
It's doable :)
My spyder:'s: Military Camo, Paramilitary 2 CTS-XHP Orange, Paramilitary 2 CTS-204P Green, Endura 4 ZDP-189 ComboEdge BRG, Endura 4 ZDP-189 FFG BRG, Manix 2 Lightweight Blue, Caly 3 G-10, Salt 1 Yellow SE C88SYL, Ulize, Manix I C95, Manix 2 XL S90v CF, Delica 4 CE Black C11PCBBK, Manix 2 154CM, Military All Black C36GPBK, Stretch SE C90SBK Black FRN, Caly3 CF ZDP-189/420J2, Sage 3 BoltLock CF, Gayle Bradley C134CFP, Squarehead C193TIP, Pacific Salt Yellow SE C91SYL, Pacific Salt Black C91PBK, Ladybug 3 Salt LYL3, Stretch CF ZDP-189 C90CF, Lum Large Chinese Folder C143G, Perrin Street Bowie FB04PBB, Mantra Titanium C202TI, Farid K-2 Titanium C185TI, Para 3 C223GPGYCW Para 3 Cruwear
Top
User avatar
Blerv
Member
Posts: 11833
Joined: Mon May 04, 2009 11:24 am

#15

Post by Blerv »

I can see coming up with a deep-carry clip to fit the standard bolts of say the Manix2, Para2 and Military and selling it through SFO.

There are a number of deep to low-ride clips available on other models. Often on the models that are designed to be less "tactical" as accessing a tool with only a nub exposed isn't very easy.
Top
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

#16

Post by Evil D »

Not everybody likes deep carry but I would absolutely love if an optional deep carry clip was designed that could be bought from SFO. I'd buy several.
All SE all the time since 2017
~David
Top
TomAiello
Member
Posts: 6660
Joined: Tue Jun 11, 2013 10:34 pm
Location: Twin Falls, ID

#17

Post by TomAiello »

I bought 4 deep carry clips from a guy on Bladeforums. They work great and they're not too expensive. I've seen them on eBay too.

I really, really prefer deep carry. I regular snag things on non-deep carry knives at work, and often yank them out of my pocket.
Top
User avatar
nccole
Member
Posts: 475
Joined: Sun May 06, 2012 3:33 pm
Location: Indiana

#18

Post by nccole »

I am a big fan :D If a Spyderco does not come with a wire clip, odds are it is getting replaced. I think the hour glass clip is a great design, and does a great job at securing the knife, I just don't like how much of the knife sticks out.
Image
Image
Image
Image
Image
Top
jalcon
Member
Posts: 945
Joined: Wed Sep 04, 2013 8:50 am
Location: Hershey, PA

#19

Post by jalcon »

This thread has been brought up about once every month or two for a long time. Answer is always the same :(

I have a few of STR's clips though.
Top
User avatar
donutsrule
Member
Posts: 433
Joined: Fri Sep 24, 2004 10:33 am
Location: San Diego

#20

Post by donutsrule »

NoFair wrote:The exact place to put the fold varies a bit from model to model and tip up/down so it is hard to make a perfect one that isn't custom.
Spyderco would simply have to locate the screw holes during prototype stage to allow a pre-existing fold to work.

They could have 3 different drop depths (S/M/L) to allow for any unavoidable setup differences.
Top
Post Reply

Return to “Spyderco General Discussion”