Spyderco Forums

My appreciation for SB steel has been steadily growing over the past few years since I've been using the SB Mule and struggling to increase sharpening competence. At one point I remember stating here that SB was not suitable for folders :eek: I love being proven wrong :D

A standard vg-10 Endura is a solid, unpretentious, useful knife. Make the blade from Aogami Super Blue steel, take the edge angle down a bit, and for me at least, the knife takes on a different character :) A purely subjective impression but delightful nonetheless :D The Endura looks the same, but feels more like a sports car in the way it cuts :D The words I type here have trouble expressing the appreciation I feel for the company that brings these uncommon materials to very user friendly models like the Endura :)

Thank You Sal and Spyderco for sharing this Aogami Super Blue and making it accessible :) Better pictures to follow.

I've not got one of the latest FRN Super Blue sprints but I'm really liking my Caly 3 sprint a heck of a lot! :) It might be due to the Caly 3 design more than the steel, but this thing seems to never leave my side at the moment. I keep her at 30 inclusive and find that's plenty slicey for the Super Blue. I tend to have to strop the patina off the bevel quite frequently to keep the blade hair whittling, cleaned a tiny bit of corrosion out of the pivot a few months back, but other than that I've been using the Super Blue like any other steel. Still prefer M4 though





Uke

I really like the edge they take/hold and find their ever-changing patina to be an aesthetic bonus.

Adam

dbcad wrote:Thank You Sal and Spyderco for sharing this Aogami Super Blue and making it accessible :)

Well said.

I love superblue! its my favourite steel behind M4. takes an amazing edge!

I also like super blue a whole lot - I have the Delica and the Caly 3. Between the 2 the Caly 3 still see the most use, because I like the design better than the Delica (feels more solid, deep carry, choil). The Delica cuts better because it's thinner, (2.5mm vs 3mm).

trevitace wrote:I really like the edge they take/hold and find their ever-changing patina to be an aesthetic bonus.

Adam

Hmm, this pic makes me think I really need to try a Caly 3.5!

Uke wrote:Hmm, this pic makes me think I really need to try a Caly 3.5!

Ive owned 2 of the SB 3.5s and sold both of them because they both had a large amount of vertical blade play. I looked around online and found out that it was a problem for this run. So be careful and ask questions when looking to buy

Holland wrote:Ive owned 2 of the SB 3.5s and sold both of them because they both had a large amount of vertical blade play. I looked around online and found out that it was a problem for this run. So be careful and ask questions when looking to buy

Was that also a problem with the Superblue Caly 3? I have been searching (in vain) for a SB 3.5 since I want a non-laminated superblue blade, but if I'm barking up a tree that has some QC issues on a hard to find knife, then I'll live with .5 less inches.

The blade play on the two I have is there, but just barely discernible. I'd say it's no worse than the two other back-lock Spydercos I own, the Delica SB and Dragonfly 2 frn/vg-10.

Adam

A lot of Caly fans :) I can see how the blade shape would complement this Super Blue steel :)

I just have the Mule with a recently truncated tip :eek: and now a new Endura which is still untarnished for now. Even though it's 3 mm thick, the Endura is now my traveling kitchen slicer :D

Can't get over the edge Super Blue can get and the ease of attaining a very sharp edge with this steel. Very well worth trade off of an easy tarnish :D

Thanks again to Spyderco for letting us play with this stuff :D

It's only been a week so I had to add....

Just a bit of vegetable prep then very,very thin slices from a marinated London broil.........The natururally induced patina is part of what makes this steel so appealing :D

I love my Caly 3, which has no vertical play. It's a fantastic design even without the super blue steel, which is a huge bonus for its sharpening and cutting properties made huger by the fun of watching the patina come and sometimes go, if you cut abrasive stuff, like some types of pears, for example. I've thought of getting the 3.5, but I already have that in the carbon fiber ZDP-189 model which is super also :D They make a great pair :spyder:

After cutting acidic vegetables and fruits:


After peeling and cutting some local pears, which "sands" away some of the outer patina, smoothing out the surface (shown with my SB Endura):


I threw this shot in to show the core patina on the laminated Endura, shown with Caly below:

Very nice photos Doug

Many of my lockbacks have vertical play. Luckily most mine are designated to medium or light use. If you don't feel the play much with low angles and light cutting.

Holland wrote:Very nice photos Doug

Thanks, Spencer :)

I am enjoying my delica so far. Cuts very well. I really enjoy knives that get very sharp very easily and that is my experience with this knife. I took the bevel down some. Not sure how far because I did it by hand but I have just been using it for light duty stuff like slicing apples and just a touch up at 30 degrees with UF stones and it keeps it scary sharp. I have some need for stainless knives but my EDC knife does not have to be. I like carbon steels and tool steels a lot.





Mine did show some patina developing in the stainless due to machining. At least that is my assumption from what I have read. It isn't very bad and it is very difficult to see. I had a hard time getting it to show in a photo. The angle has to be just right. It doesn't effect performance and I am going to use this knife anyway so it doesn't really matter to me.



If I had more money I would be buying an endura while there are still some left. I'll probably pick up a SB stretch or dragonfly when they come out. Very satisfied!

Wish I had a SB caly 3.5 too. Maybe someday I'll find a used one. Craigslist has been good to me lately!

Ive had the stretch pre-ordered for months and can't wait to tryout that design :D and of course, the SB dfly is going to be an instant winner for me

I'm believing one of Super Blue's nicest attributes is that it offers very easy "edge accessibility" :D A very. very sharp edge is achievable with this stuff without too much effort, and the blade keeps it well :D