My Centofante Memory - now with 100% less blue!
My Centofante Memory - now with 100% less blue!
I've always really liked the size, shape, blade, and smooth operation of the Centofante Memory. But, the shiny blue handles were a little too blingy for my personal tastes. A while ago, I bought a second Memory with the intention of trying to remove the blue anodizing from my carry Memory. Today, I finally got around to doing it!
I was a little worried, this being my first attempt at modding a Spyderco. But, the Memory was very simple to disassemble and work with. The blue coloring came right off with about 15 minutes of buffing with a Dremel. Then I lightly stonewashed it and finished it with some fine steel wool. I really like how it turned out! I was concerned about the lack of contrast with silver glass fiber and bare titanium, but I actually like it better like this, and I don't have any plans to try to make a replacement onlay right now. Though I might try to make one with wood if I also attempt wooden Mule scales. Or I might try dying the glass fiber.
Here are the pics (sorry about the quality, might try to take better ones later)...
There are still hints of blue in places. I kind of like a little subtle blue still showing through in a few spots, so I wasn't necessarily trying to get every speck off.
Here is a side-by-side with a NIB Memory for comparison. Quite a difference!
I'm sure this Memory will be in my pocket for the next few weeks. The stonewashed finish looks great, and eliminates worrying about scratches. :D
I was a little worried, this being my first attempt at modding a Spyderco. But, the Memory was very simple to disassemble and work with. The blue coloring came right off with about 15 minutes of buffing with a Dremel. Then I lightly stonewashed it and finished it with some fine steel wool. I really like how it turned out! I was concerned about the lack of contrast with silver glass fiber and bare titanium, but I actually like it better like this, and I don't have any plans to try to make a replacement onlay right now. Though I might try to make one with wood if I also attempt wooden Mule scales. Or I might try dying the glass fiber.
Here are the pics (sorry about the quality, might try to take better ones later)...
There are still hints of blue in places. I kind of like a little subtle blue still showing through in a few spots, so I wasn't necessarily trying to get every speck off.
Here is a side-by-side with a NIB Memory for comparison. Quite a difference!
I'm sure this Memory will be in my pocket for the next few weeks. The stonewashed finish looks great, and eliminates worrying about scratches. :D
- dialex
- Member
- Posts: 9169
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Campina, Romania, Europe, Terra
- Contact:
Very nice. I was a little turned off by those blue handles myself although I do love a lot the Centofante Memory model. The natural colour of titanium seems more appropriate and more appealing (at least to me). Enjoy your "new and improved" fine knife.
The mind commands the body and it obeys. The mind orders itself and meets resistance.
-
- Member
- Posts: 3660
- Joined: Tue Jan 18, 2011 7:30 pm
- Location: Toronto Canada
- Half Sack
- Member
- Posts: 260
- Joined: Sat Apr 30, 2011 12:55 am
- Location: Alberta, undisclosed location of the Weapon Plus Program
Sprint run preview? Unless Blue was a favourite of Mr Centofante then I can see this being sold.
Very nice, I've got no problem with the blue myself but this is more my style.
Nice work.
lol I just relooked at the pictures before posting, if this was available in your less blue version I would love the blue, it pops on camera.
Very nice, I've got no problem with the blue myself but this is more my style.
Nice work.
lol I just relooked at the pictures before posting, if this was available in your less blue version I would love the blue, it pops on camera.
I really don't think the metal type has anything to do with how effective it is at removing the coating. I'm also not completely sure but I think the coating and process of coating is the same for AL/Ti so it should still work. If not, another thing you may try in the future is Permatex gasket remover. It's an automotive product used for removing gasket material off cylinder heads and such. You can sometimes find it in parts stores or you can order it online. I use it as a paint/powder coat stripper and it works outstandingly well, FAR better than any "aircraft stripper" that I've tried, and I have literally tried every kind of commercially available paint stripper there is (I used to restore vintage car rims as a hobby). I would bet a knife or two that the gasket remover would make short work of the anodizing and not harm the metal underneath.gbelleh wrote:I saw a lot about using Easy Off on aluminum, but I read some reports of it not working on titanium. Using the Dremel couldn't have been much easier. It just came right off.
All SE all the time since 2017
~David
~David
- Brock O Lee
- Member
- Posts: 3316
- Joined: Thu Jul 21, 2011 3:34 am
- Location: Victoria, Australia
-
- Member
- Posts: 414
- Joined: Wed Apr 10, 2013 7:50 am
- The Deacon
- Member
- Posts: 25717
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
FWIW, while I'm sure both those methods would work on Almite, Tufram, and other coatings, I'm far less certain either would work on anodizing. That's because it's not a "coating" it's a process that chemically changes the color of the material being anodized, much the same as how bluing colors the steel of a firearm.Evil D wrote:I really don't think the metal type has anything to do with how effective it is at removing the coating. I'm also not completely sure but I think the coating and process of coating is the same for AL/Ti so it should still work. If not, another thing you may try in the future is Permatex gasket remover. It's an automotive product used for removing gasket material off cylinder heads and such. You can sometimes find it in parts stores or you can order it online. I use it as a paint/powder coat stripper and it works outstandingly well, FAR better than any "aircraft stripper" that I've tried, and I have literally tried every kind of commercially available paint stripper there is (I used to restore vintage car rims as a hobby). I would bet a knife or two that the gasket remover would make short work of the anodizing and not harm the metal underneath.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable :p
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
- Pinetreebbs
- Member
- Posts: 1833
- Joined: Sat Jun 26, 2010 6:55 am
- Location: SC
That is a nice look. The blue is nice too, however any coating inevitably gets scratches and IMO, never looks as good as the base material with no coating.
Have you joined Knife Rights yet?
Go to: http://www.KnifeRights.org
Protecting your Right to own and carry the knives YOU choose.
Go to: http://www.KnifeRights.org
Protecting your Right to own and carry the knives YOU choose.
- phillipsted
- Member
- Posts: 3674
- Joined: Tue Oct 05, 2010 11:30 am
- Location: North Virginia