I'd like to see a Spyderco not Byrd but a Spyderco version of the Crossbill with either a 3.75" S30V or VG10 blade and FRN but preferably G10, no wire clip but a real clip.
A large size Native 4" VG10 or S30V blade, high polished with the same geometry as the original, G10 would be great.
A large version of the Endura, "The Super Endura XL" or Super Police... whatever they come up with. A 4.5 - 5" blade version made from s30v or vg10 and slabs of g10. I know it would be similar to the Police but a slightly longer blade. And one more important item, SABER GROUND BLADE with high polish and not the shoddy half finished look that you've been feeding us for the last few years.
O.K. guys getter done
What Knife / Knives would you like to see from Spyderco iether discontinued or new ?
-
guitarwolf
- Member
- Posts: 63
- Joined: Wed Jun 19, 2013 1:23 am
- Location: USA
-
Nemonomicon
- Member
- Posts: 30
- Joined: Thu Jun 30, 2011 6:58 pm
/ Viele collaboration.
-
The Deacon
- Member
- Posts: 25432
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Upstate SC, USA
- Contact:
I can think of a few that I'd love to see.
The return of the midlock Jigged Bone Kiwi in its original form would be great. A full flat ground blade without the hump would make it even better.
The bolstered cocobolo Stretch put into production, either as a Sprint or Limited Edition.
A smooth bolstered version of the Chaparral. The good folks in Taichung do excellent work on screw construction knives, so I'd and I'd really like to find out whether they can match or top the Japanese on a pinned knife.
EDITED TO ADD:
One more, a revised C83 Schempp Persian. Bolstered, like the original, but with a full flat ground blade like the Persian 2 only with a 14mm Spyderhole and with no Boye dent in the lockbar.
The return of the midlock Jigged Bone Kiwi in its original form would be great. A full flat ground blade without the hump would make it even better.
The bolstered cocobolo Stretch put into production, either as a Sprint or Limited Edition.
A smooth bolstered version of the Chaparral. The good folks in Taichung do excellent work on screw construction knives, so I'd and I'd really like to find out whether they can match or top the Japanese on a pinned knife.
EDITED TO ADD:
One more, a revised C83 Schempp Persian. Bolstered, like the original, but with a full flat ground blade like the Persian 2 only with a 14mm Spyderhole and with no Boye dent in the lockbar.
Paul
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
My Personal Website ---- Beginners Guide to Spyderco Collecting ---- Spydiewiki
Deplorable
WTC # 1458 - 1504 - 1508 - Never Forget, Never Forgive!
5 inches police 3, vg 10,g10 and a lanyard hole, that sounds wicked... But im partial for FFG yet i expect a stiff blade so gotta ramp up the thickness a bit.
I would like to be able to get a waved + ffg + zdp + colorful delica/endura and also being able to chose the edge type, g10 colored slabs would be even better !
I would like to see the chinook 1 back with screwed construction, 3v steel, and a four ways clip, no wire clip ( duh ) and no skeletonized liners, make it available in full SE and i would get two...
What about resurrecting the worker with the exact same handle as the delica 4, vg10, full ss or g10 or even zytel, with screw construction ?
I would like to be able to get a waved + ffg + zdp + colorful delica/endura and also being able to chose the edge type, g10 colored slabs would be even better !
I would like to see the chinook 1 back with screwed construction, 3v steel, and a four ways clip, no wire clip ( duh ) and no skeletonized liners, make it available in full SE and i would get two...
What about resurrecting the worker with the exact same handle as the delica 4, vg10, full ss or g10 or even zytel, with screw construction ?
-
vaisforlovers
- Member
- Posts: 443
- Joined: Sun Jan 08, 2012 9:10 pm
- Location: Nebraska
Every chance I get I put in a plug for an H1 full size Dyad.
I'm told it isn't going to happen, but you asked.
I'm told it isn't going to happen, but you asked.
"The person who has nothing for which he is willing to fight is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself" John Stewart Mill
I am really hoping to see the FFG Kiwi prototype, that Wouter showed us, be released. I have yet to test out a wharncliffe but that design looks amazing, IMO.
As far as a future design, I think a modified Para 2 would be cool. I had one and found it too large. If Sal and Eric could design a thinner, slightly smaller model and release it with CTS XHP then I would be all over it. I think someone offered to name a smaller Para, "Scout". Sounds good to me.
As far as a future design, I think a modified Para 2 would be cool. I had one and found it too large. If Sal and Eric could design a thinner, slightly smaller model and release it with CTS XHP then I would be all over it. I think someone offered to name a smaller Para, "Scout". Sounds good to me.
1. 3.5" FFG Native 204P or better steel
2. Clipless Giraffe bone Kopa VG10 will be fine
3. Damascus bolstered Caly3 with ancient ivory micarta scales.
4. Seki made kitchen knives: Santoku, 4" Paring, 9" Gyuto.
2. Clipless Giraffe bone Kopa VG10 will be fine
3. Damascus bolstered Caly3 with ancient ivory micarta scales.
4. Seki made kitchen knives: Santoku, 4" Paring, 9" Gyuto.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
My top choices Natives5, Calys, C83 Persian
My top choices Natives5, Calys, C83 Persian
-
Liquid Cobra
- Member
- Posts: 6414
- Joined: Wed Jan 02, 2013 11:38 pm
- Location: British Columbia, CANADA
Bob lum tanto folder.
Most recently acquired: Paramilitary 2 Tanto, YoJUMBO, Swayback, Siren, DLC Yojimbo 2, Native Chief, Shaman S90V, Para 3 LW, Ikuchi, UKPK, Smock, SUBVERT, Amalgam, Para 3 CTS-XHP, Kapara, Paramilitary 2 M390
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
Grail Paramilitary 2 M390 X 2! ACHIEVED!!
For more of my pictures see my Instagram account.
@liquid_cobra
Option to get different steel for my LH Military. I'm tempted to take a Cruwear blade and add some metal, then regrind the tang where the liner locks up.
Click here to zoom: Under the Microscope
Manix2, Elmax MT13, M4 Manix2, ZDP Caly Jr, SB Caly3.5, Cruwear MT12, XHP MT16, South Fork, SB Caly3, 20CP Para2, Military Left Hand, Perrin PPT, Squeak, Manix 83mm, Swick3, Lil' Temperance, VG10 Jester, Dfly2 Salt, Tasman Salt
Chris
Manix2, Elmax MT13, M4 Manix2, ZDP Caly Jr, SB Caly3.5, Cruwear MT12, XHP MT16, South Fork, SB Caly3, 20CP Para2, Military Left Hand, Perrin PPT, Squeak, Manix 83mm, Swick3, Lil' Temperance, VG10 Jester, Dfly2 Salt, Tasman Salt
Chris
-
michaelm466
- Member
- Posts: 506
- Joined: Tue Dec 21, 2010 8:48 pm
- Location: Mesa, AZ
zeroed4x wrote:I'd like to see a Spyderco not Byrd but a Spyderco version of the Crossbill with either a 3.75" S30V or VG10 blade and FRN but preferably G10, no wire clip but a real clip.
A large size Native 4" VG10 or S30V blade, high polished with the same geometry as the original, G10 would be great.
A large version of the Endura, "The Super Endura XL" or Super Police... whatever they come up with. A 4.5 - 5" blade version made from s30v or vg10 and slabs of g10. I know it would be similar to the Police but a slightly longer blade. And one more important item, SABER GROUND BLADE with high polish and not the shoddy half finished look that you've been feeding us for the last few years.
O.K. guys getter done
I'd like to see the Stretch and Dragonfly available in all the colors that the Delica and Endura come in.
Rule#9:Never go anywhere without a Spyderco
Delica4 G-10, Delica4 BRG ZDP189, Delica4 Blue ZDP189,Delica4 SuperBlue,Delica4 Black VG-10,Stretch VG-10,Stretch Blue ZDP189,Manix2 CTS-XHP,Manix2 M4,Black Paramilitary2 S30V,Gray Paramilitary2 CTS20CP,Blue Paramilitary2 M390,Orange Paramilitary2CTS-XHP,Black Dragonfly2,Orange Dragonfly2 , Dragonfly2 G-10,Gayle Bradley M4, Superhawk VG-10,Native III VG-10,Sage I,Yellow Tasman Salt,Centofante 4
Delica4 G-10, Delica4 BRG ZDP189, Delica4 Blue ZDP189,Delica4 SuperBlue,Delica4 Black VG-10,Stretch VG-10,Stretch Blue ZDP189,Manix2 CTS-XHP,Manix2 M4,Black Paramilitary2 S30V,Gray Paramilitary2 CTS20CP,Blue Paramilitary2 M390,Orange Paramilitary2CTS-XHP,Black Dragonfly2,Orange Dragonfly2 , Dragonfly2 G-10,Gayle Bradley M4, Superhawk VG-10,Native III VG-10,Sage I,Yellow Tasman Salt,Centofante 4
Have wondered if something like this would work as well... but it may be better to just keep pushing for a LH Millie sprintClip wrote:Option to get different steel for my LH Military. I'm tempted to take a Cruwear blade and add some metal, then regrind the tang where the liner locks up.
Also would love to see a micarta Chaparral.
Return to “Spyderco General Discussion”
Who is online
Users browsing this forum: Google [Bot], nerdlock, Pokey, samdasnake, TenGrainBread, VashHash and 44 guests