Manix 2 lightweight
Manix 2 lightweight
Does anyone own a Manix 2 lightweight? I would like to hear from you about the handle material and steel. Can this knife do some heavy cutting and can it be used as a workhorse. Is the blade retention good and is it easy to sharpen. I'm thinking about getting one but I want to hear from a couple of owners first. No store in town carries it so I can't handle one to make up my mind.
Thanks.
:spyder: S30V-Native, S30V-UKPK, Persistence
Thanks.
:spyder: S30V-Native, S30V-UKPK, Persistence
- xceptnl
- Member
- Posts: 8594
- Joined: Mon Feb 21, 2011 7:48 pm
- Location: Tobacco Country, Virginia
- Contact:
I have been really pleased with mine and I am a hardcore Manix 2 lover. This knife defies the typical criteria that the Manix fits into, but really surprised me. The handle material is almost as stiff as FRN and has identical traction. The CTS-BD1 is a nice fine grained steel that sharpens easily and responds well to light stropping as well. Regarding your "heavy cutting" question I believe that is subjective unless you care to ask about specific instances or planned uses.
I find all folding spydercos (with locks) to be suited to preform heavy cutting. This is because I am only talking about heavy cutting related to a folder. If I really have heavy work to be done, I am using a fixed blade / machete / hatchet / axe / etc. The hardest use I have put my FRCP Manix thru so far is some whittling of an old piece of oak that has been drying in a shed for years. The lockup is un-phased and handle didn't flex any noticeable amount.
I find all folding spydercos (with locks) to be suited to preform heavy cutting. This is because I am only talking about heavy cutting related to a folder. If I really have heavy work to be done, I am using a fixed blade / machete / hatchet / axe / etc. The hardest use I have put my FRCP Manix thru so far is some whittling of an old piece of oak that has been drying in a shed for years. The lockup is un-phased and handle didn't flex any noticeable amount.
*Landon*sal wrote: .... even today, we design a knife from the edge out!
I did a bit of a review on mine a while back if that's any help to you -
http://www.spyderco.com/forums/showthre ... ght-Review
I've had it as one of my main users ever since the review and it's never let me down. In fact it's become one of my favourite and most used Spydies. I find the BD1 requires more frequent sharpening if you want to keep it razor sharp but it sharpens up very easily and keeps a working edge for a good amount of time. A few months back I forgot I'd left it in a pair of my trousers on the floor and when I flicked them out out to fold up and put away the Manix flew straight out of the pocket and about 10ft into a wall! I held my breath but just found a healthy couple of mm dink in the handle and the lock up was still tight as a drum. So the FRCP handle gets extra marks from me for durability, although I wouldn't recommend throwing it at any walls...I doubt that was what Spyderco had in mind for it! :)
http://www.spyderco.com/forums/showthre ... ght-Review
I've had it as one of my main users ever since the review and it's never let me down. In fact it's become one of my favourite and most used Spydies. I find the BD1 requires more frequent sharpening if you want to keep it razor sharp but it sharpens up very easily and keeps a working edge for a good amount of time. A few months back I forgot I'd left it in a pair of my trousers on the floor and when I flicked them out out to fold up and put away the Manix flew straight out of the pocket and about 10ft into a wall! I held my breath but just found a healthy couple of mm dink in the handle and the lock up was still tight as a drum. So the FRCP handle gets extra marks from me for durability, although I wouldn't recommend throwing it at any walls...I doubt that was what Spyderco had in mind for it! :)
Love mine. Been using it a bit ay work lately...nothing really heavy. Basically just cutting cardboard, tape, and plastic. But it has performed quite well...
My Spydies: Sharpmaker • Tasman Salt • Saver Salt • Ladybug Hawkbill Salt • Salt 1 • Blue/Gray Meerkat • Burgundy Meerkat • Manix2 Ltwt Translucent Blue • Manix2 Ltwt Blacked Out • Manix2 Backlock • Ladybug 1 Red • Blue UKPK • Tusk • Blue Lava • Dog Tag • Bug • Honeybee • Grasshopper • Stepped Ti Chaparral • McBee • AEB-L Urban
-
- Member
- Posts: 159
- Joined: Mon Jan 17, 2011 7:03 pm
- Location: Ashburn, VA
I have been a serious Manix 2 fan since the g-10 version was released. The blue one has been my EDC since it first came out, only to be replaced last week by the black lightweight. BD1 is a surprisingly good steel and the knife is surprisingly strong for having no liners. It can't do everything a regular Manix 2 can do, but it weighs much less.
I took a month off from buying a knife. It's been tough lol. But I'm deciding between a regular manix 2 or the lightweight manix 2. What is something the regular manix 2 could do that the light weight could not?Infinite Zero wrote:I have been a serious Manix 2 fan since the g-10 version was released. The blue one has been my EDC since it first came out, only to be replaced last week by the black lightweight. BD1 is a surprisingly good steel and the knife is surprisingly strong for having no liners. It can't do everything a regular Manix 2 can do, but it weighs much less.
-
- Member
- Posts: 159
- Joined: Mon Jan 17, 2011 7:03 pm
- Location: Ashburn, VA
If you had no other choice, you could do some light prying with the regular Manix (full liners and saber grind, not the FFG sprints). That's about it.Mahmer09 wrote:I took a month off from buying a knife. It's been tough lol. But I'm deciding between a regular manix 2 or the lightweight manix 2. What is something the regular manix 2 could do that the light weight could not?
I've never had any real problems with BD1. Like others have said, it doesn't keep an edge as well as other steels might, but it takes an edge very easily and has a nice polish to boot. The lightweight handle is great, and this is made all the better by a wire clip.
It's plenty strong for most tasks that would be considered 'light' to 'moderate' tasks for a typical folding knife, but anyone who suggests it is just as capable as the standard Manix2 may be a bit naive in their assessment. For me, the main thing I feel the lightweight Manix2 brings to the table is a lightweight and discreet platform with the same great ergos of the standard Manix2, and all at a very reasonable price.
It's plenty strong for most tasks that would be considered 'light' to 'moderate' tasks for a typical folding knife, but anyone who suggests it is just as capable as the standard Manix2 may be a bit naive in their assessment. For me, the main thing I feel the lightweight Manix2 brings to the table is a lightweight and discreet platform with the same great ergos of the standard Manix2, and all at a very reasonable price.