Discuss Spyderco's products and history.
akbell
Member
Posts: 32 Joined: Fri Sep 24, 2004 10:33 am
#1
Post
by akbell » Sun Dec 24, 2000 1:00 am
I have an all stainless 3' spyderco that I have not seen anywhere else.
The handles are 3', the blade is 2" on one side the blade has Seki-City Japan and the other has Spyderco Gin-1 stainless, the blade spyder edge.
Never seen it in catalogs or stores, any one got a clue?? Thanks
akbell@atlantic.net
afee
Member
Posts: 42 Joined: Fri Sep 24, 2004 10:33 am
#2
Post
by afee » Mon Dec 25, 2000 9:01 am
Could be a number of items. Possibly an older co-pilot or other small one. Any further comments on shape, blade profie, etc. Clip position, maybe? A pic would be the easiest way to help...
akbell
Member
Posts: 32 Joined: Fri Sep 24, 2004 10:33 am
#3
Post
by akbell » Mon Dec 25, 2000 10:14 am
no way o input a pix. The current catalog doesn't list any blades made of Gin-1 stainless, or Seki-City Japan. akb
sal
Member
Posts: 17058 Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA
#4
Post
by sal » Tue Dec 26, 2000 11:58 am
Hi Akbell. My guess would be a Pegasus.
Does the blade look sorta like a Boeing 747?
sal
Fozzy
Member
Posts: 238 Joined: Fri Sep 24, 2004 10:33 am
Location: Massachusetts USA
#5
Post
by Fozzy » Tue Dec 26, 2000 12:22 pm
Maybe a Spur or Executive??
Ben
"No good deed goes unpunished."
sal
Member
Posts: 17058 Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA
#6
Post
by sal » Tue Dec 26, 2000 12:53 pm
Hi Fozzy. I believe the Executive would have listed G-2 rather than GIN-1. I believe the same might be true of the Spur.
It could be a recent CoPilot as mentioned.
sal
Edited by - sal on 12/26/00 11:55:23 AM
akbell
Member
Posts: 32 Joined: Fri Sep 24, 2004 10:33 am
#7
Post
by akbell » Sat Dec 30, 2000 5:58 pm
I got it at a gun show and was told "it was an expermental model" supposedly never went into production? Still have no clue as to what it is.
shootist16
Member
Posts: 337 Joined: Fri Sep 24, 2004 10:33 am
Location: Knoxville, Tennessee USA
#8
Post
by shootist16 » Sat Dec 30, 2000 9:52 pm
Any way you can scan a pic? If you can and email it to me I will post it. Probably the only way we will get a definitive answer.
Dennis Bible
Blades
Member
Posts: 1926 Joined: Fri Sep 24, 2004 10:33 am
Location: Fayetteville, NC USA
#9
Post
by Blades » Sun Dec 31, 2000 1:34 pm
dac
Member
Posts: 28 Joined: Fri Sep 24, 2004 10:33 am
#10
Post
by dac » Sun Dec 31, 2000 2:40 pm
That knife sounds like an early version of the Pegasus.
akbell
Member
Posts: 32 Joined: Fri Sep 24, 2004 10:33 am
#11
Post
by akbell » Mon Jan 01, 2001 1:25 pm
The handle is shaped like a Native and the blade looks like a Copilot.
StevieK
Member
Posts: 39 Joined: Fri Sep 24, 2004 10:33 am
Location: United Kingdom
#12
Post
by StevieK » Wed Jan 03, 2001 4:43 am
Hey akbell/guys, I too have a very similar Spyderco, however this one has an G10 handle rather than Stainless and a plain blade rather than SpyderEdge. All the markings on the blade are the same and the handle and blade shape sound identical. Also the packaging has a sticker with "Experimental" on it. Mine was sold to me as an early version of the Pegasus. Hope that helps.
StevieK
Whoops ! Spot the newbie, what I have actually been sold is an early version of the Navigator !
Edited by - StevieK on 1/5/2001 7:46:40 AM