Forum Knife Updates

Discuss Spyderco's products and history.
Slash
Member
Posts: 1276
Joined: Tue Feb 15, 2011 8:33 am
Location: SIN CITY

Forum Knife Updates

Postby Slash » Tue Jul 17, 2012 5:53 pm

Please...inquiring minds want to know.

I know there is a separate thread, but can we please with a cherry on top have something so our panties don't get in an uproar. :)
Thanks

nullity
Member
Posts: 67
Joined: Thu Mar 29, 2012 1:16 am

Postby nullity » Tue Jul 17, 2012 9:23 pm

Uproarious underwear?

User avatar
SpyderNut
Member
Posts: 7983
Joined: Fri Sep 24, 2004 10:33 am
Location: Hoosier Country, USA
Contact:

Postby SpyderNut » Wed Jul 18, 2012 4:52 pm

Slash wrote:...so our panties don't get in an uproar. :)
Boy, I hate it when that happens. :)
:spyder: -Michael

"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal

User avatar
chuck_roxas45
Member
Posts: 8753
Joined: Wed Mar 03, 2010 5:43 pm
Location: Small City, Philippines

Postby chuck_roxas45 » Wed Jul 18, 2012 5:01 pm

Slash wrote:Please...inquiring minds want to know.

I know there is a separate thread, but can we please with a cherry on top have something so our panties don't get in an uproar. :)
Thanks
That never happens, they do get all bunched up. :D

User avatar
DCDesigns
Member
Posts: 1015
Joined: Fri Aug 05, 2011 5:50 pm
Location: ATL, Ga.
Contact:

Postby DCDesigns » Wed Jul 18, 2012 5:06 pm

you mean you have never had you undergarments start rabble rousing spontaneously?

User avatar
Donut
Member
Posts: 9493
Joined: Sat Sep 05, 2009 5:47 pm
Location: Virginia Beach, VA, USA

Postby Donut » Wed Jul 18, 2012 5:42 pm

The latest update is: no updates. :)
-Brian
A distinguished lurker.
Waiting on a Squeak and Pingo with a Split Spring!

User avatar
Buddha UK
Member
Posts: 69
Joined: Wed Jun 13, 2012 3:47 am
Location: UK

Postby Buddha UK » Thu Jul 19, 2012 2:09 pm

These panties must be stopped!!!
This is the perfect excuse for a Sprint run Panty Rescue Knife...
in H1 maybe. :-P

User avatar
Clip
Member
Posts: 1577
Joined: Mon Mar 19, 2012 8:29 am
Location: Forest, VA

Postby Clip » Thu Jul 19, 2012 2:51 pm

Buddha UK wrote:in H1 maybe. :-P
That made me gag a little and laugh a lot.
Click here to zoom: Under the Microscope

Manix2, Elmax MT13, M4 Manix2, ZDP Caly Jr, SB Caly3.5, Cruwear MT12, XHP MT16, South Fork, SB Caly3, 20CP Para2, Military Left Hand, Perrin PPT, Squeak, Manix 83mm, Swick3, Lil' Temperance, VG10 Jester, Dfly2 Salt, Tasman Salt

Chris

User avatar
Buddha UK
Member
Posts: 69
Joined: Wed Jun 13, 2012 3:47 am
Location: UK

Postby Buddha UK » Thu Jul 19, 2012 7:04 pm

Thanks Clip, exactly the result I was hoping for! :D

Rogcohen
Member
Posts: 361
Joined: Fri Jan 27, 2006 3:01 pm

Postby Rogcohen » Fri Jul 20, 2012 7:11 am

DCDesigns wrote:you mean you have never had you undergarments start rabble rousing spontaneously?
Last year mine decided to join the Occupy Ball Street movement.....

User avatar
sal
Member
Posts: 14533
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Postby sal » Fri Jul 20, 2012 2:47 pm

Actually we discussed your request this morning in our morning product meeting. We are working on a knife for you. It is special in many ways, but we don't want to say too much too soon. Part of what we are doing, we've not done before and want to make sure we can do it before commitment. Patience. your kind understanding and cooperation is appreciated.

sal

User avatar
Clip
Member
Posts: 1577
Joined: Mon Mar 19, 2012 8:29 am
Location: Forest, VA

Postby Clip » Fri Jul 20, 2012 2:50 pm

sal wrote:Actually we discussed your request this morning in our morning product meeting. We are working on a knife for you. It is special in many ways, but we don't want to say too much too soon. Part of what we are doing, we've not done before and want to make sure we can do it before commitment. Patience. your kind understanding and cooperation is appreciated.

sal
Does this qualify for placement in the 'bombshell' thread?

And:
sal wrote:Part of what we are doing, we've not done before and want to make sure we can do it before commitment.


To me, this is like Henry Ford saying, "Hey what if we do this with an assembly line?"
Click here to zoom: Under the Microscope

Manix2, Elmax MT13, M4 Manix2, ZDP Caly Jr, SB Caly3.5, Cruwear MT12, XHP MT16, South Fork, SB Caly3, 20CP Para2, Military Left Hand, Perrin PPT, Squeak, Manix 83mm, Swick3, Lil' Temperance, VG10 Jester, Dfly2 Salt, Tasman Salt

Chris

User avatar
Minibear453
Member
Posts: 822
Joined: Wed Jul 13, 2011 3:36 am

Postby Minibear453 » Fri Jul 20, 2012 2:58 pm

OH MY GOD THIS MAKES ME SO EXCITED!!! Hopefully it won't be too expensive. Oh god my lack of funds... murphy's law?
Carry a sharp knife, and life will never be dull

User avatar
dbcad
Member
Posts: 3111
Joined: Fri Jan 08, 2010 3:59 pm
Location: ga, usa

Postby dbcad » Fri Jul 20, 2012 2:59 pm

I'm content to have patience :) Don't seem to have any problems with my underwear either ;) Silence can be golden, cliche, but sometimes it seems to fit :)
Charlie

" Everything should be made as simple as possible, but not one bit simpler."

[CENTER]"Integrity is being good even if no one is watching"[/CENTER]

User avatar
Minibear453
Member
Posts: 822
Joined: Wed Jul 13, 2011 3:36 am

Postby Minibear453 » Fri Jul 20, 2012 3:03 pm

Especially at Golden, Colorado. hehe, couldn't help it.
Carry a sharp knife, and life will never be dull

User avatar
MCM
Member
Posts: 3007
Joined: Sun Jul 27, 2008 8:04 am
Location: Left Field......

Postby MCM » Fri Jul 20, 2012 3:14 pm

sal wrote:Actually we discussed your request this morning in our morning product meeting. We are working on a knife for you. It is special in many ways, but we don't want to say too much too soon. Part of what we are doing, we've not done before and want to make sure we can do it before commitment. Patience. your kind understanding and cooperation is appreciated.

sal
Thanks Sal.
Looking forward to it!

Mark
:spyder: :eek: :spyder: :eek: :spyder: :eek: :spyder:
More S90v & CF please.......

User avatar
bh49
Member
Posts: 11464
Joined: Tue Feb 14, 2006 1:37 pm
Location: former Constitution state

Postby bh49 » Fri Jul 20, 2012 3:25 pm

sal wrote:Actually we discussed your request this morning in our morning product meeting. We are working on a knife for you. It is special in many ways, but we don't want to say too much too soon. Part of what we are doing, we've not done before and want to make sure we can do it before commitment. Patience. your kind understanding and cooperation is appreciated.
sal
Thank you Sal.
Greatly appreciate.
Roman
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"

My top choices Natives5, Calys, C83 Persian

DeathBySnooSnoo
Member
Posts: 3660
Joined: Tue Jan 18, 2011 7:30 pm
Location: Toronto Canada

Postby DeathBySnooSnoo » Fri Jul 20, 2012 3:32 pm

sal wrote:Actually we discussed your request this morning in our morning product meeting. We are working on a knife for you. It is special in many ways, but we don't want to say too much too soon. Part of what we are doing, we've not done before and want to make sure we can do it before commitment. Patience. your kind understanding and cooperation is appreciated.

sal
A very intriguing and exciting post! Thanks for the update Sal, we are all looking forward to the news when you can break it!
On the hunt for...

User avatar
Blerv
Member
Posts: 11713
Joined: Mon May 04, 2009 11:24 am

Postby Blerv » Fri Jul 20, 2012 3:51 pm

Thanks for the update Sal. It's great to know it's still somewhere down the road, the location isn't that important.

Threads like Wouter's Amsterdam review are good and bad. It's tantalizing to see some cool prototypes and get insider information but the droves of random inquiries are done ad infinitum. It's the perpetual, "are we there yet?" from the backseat of the never ending road-trip.

Knowing 30-60 days in advance to release would be ideal (for me). Crossing 10 state borders and seeing the world's largest ball of twine on the way isn't necessary.
:spyder: Blake :spyder:

User avatar
PARATOM
Member
Posts: 273
Joined: Tue Dec 20, 2011 11:35 am
Location: Jacksonville, FL

Postby PARATOM » Fri Jul 20, 2012 4:05 pm

sal wrote:Actually we discussed your request this morning in our morning product meeting. We are working on a knife for you. It is special in many ways, but we don't want to say too much too soon. Part of what we are doing, we've not done before and want to make sure we can do it before commitment. Patience. your kind understanding and cooperation is appreciated.

sal
I would say this goes under the "bombshell" category... Lol

This is so awesome to hear and im really excited. The reason why i love spyderco so much is their ability to listen and respond to their customers. It is hard to find company like this these days, exspecially one of this scale. Thank you Sal for the update.

I am 100% in on this one and can not wait.
[LEFT]Para 2 digi cam/DLC | Tenacious PE | Sage 1 | Delica 4 FFG | Manix 2 | Dragonfly 2 H1 | Yojimbo 2 | SmallFly digi cam R | Citadel DLC R[/LEFT]
There are two kinds of people in this world, you're either somebody or nobody...


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Bing [Bot], blues, dca, Google [Bot], Majestic-12 [Bot], Matus, PeaceInOurTime, Radetzky, skeeg11, Spydergirl88, The Meat man, wrdwrght, yablanowitz and 33 guests