How did you use your Spyderco today?
- jackknifeh
- Member
- Posts: 8412
- Joined: Fri Jul 09, 2010 6:01 am
- Location: Florida panhandle
I used my XHP Millie to slice open some heavy duty plastic and carefully dislodged a tiny piece of rock from some tooling we use at work; it was caught in a hole.
CF Balance, CF Caly3 ZDP, Caly 3.5 SB, CAT 440C, Chaparral, Orange Jigged Damascus Delica, Blue Jigged Damascus Delica, BRG Delica ZDP(SOON TO BE G-10!), FG G-10 DragonFly, Gayle Bradley, 2012 Jester, H1 Ladybug Salt Hawkbill w/G-10 scales, Tan Manix 2 M4, MoonGlow Manix 2, C22CF Michael Walker, BRN Millie XHP, Native 5, PM2, All Black PM2, Gray PM2 20CP, Blue PM2 M390, Sage 1, Sage 2, Sage 4, Terzuola, CF Stretch ZDP, UKPK Drop Point
Glad to hear you are using that beauty! :DINFRNL wrote:I used my XHP Millie to slice open some heavy duty plastic and carefully dislodged a tiny piece of rock from some tooling we use at work; it was caught in a hole.
-Ryan
-Techno, cruwear Mule, Dragonfly 2 FRN, Assist, Endura FRN ATS-55 SE, Endura SS aus-6 PE, Persistence(Wife's)
-Wicked Edge
-Techno, cruwear Mule, Dragonfly 2 FRN, Assist, Endura FRN ATS-55 SE, Endura SS aus-6 PE, Persistence(Wife's)
-Wicked Edge
So far you're right, it grows on you and the size fades away :)rg02 wrote:Glad to hear you are using that beauty! :D
Yesterday I do not know what happened, but the blad was not fully close when I put it back in my pocket :eek: ended up with some slits in my jeans :o this knife is very sharp on factory edge
CF Balance, CF Caly3 ZDP, Caly 3.5 SB, CAT 440C, Chaparral, Orange Jigged Damascus Delica, Blue Jigged Damascus Delica, BRG Delica ZDP(SOON TO BE G-10!), FG G-10 DragonFly, Gayle Bradley, 2012 Jester, H1 Ladybug Salt Hawkbill w/G-10 scales, Tan Manix 2 M4, MoonGlow Manix 2, C22CF Michael Walker, BRN Millie XHP, Native 5, PM2, All Black PM2, Gray PM2 20CP, Blue PM2 M390, Sage 1, Sage 2, Sage 4, Terzuola, CF Stretch ZDP, UKPK Drop Point
-
- Member
- Posts: 1394
- Joined: Mon Nov 28, 2011 9:39 pm
- Location: Colombo, Sri Lanka
I cut a few donuts with my Millie. Then let it loose on a few mail packages that came to me. But the best one I want to share is this.
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
- razorsharp
- Member
- Posts: 3066
- Joined: Wed Mar 16, 2011 9:41 pm
- Location: New Zealand
-
- Member
- Posts: 1394
- Joined: Mon Nov 28, 2011 9:39 pm
- Location: Colombo, Sri Lanka
Erm, battoned?razorsharp wrote:I used my para and ppt to cut down 4- 2.5'' branches orr a tree. Then battoned the wood with my para for fun, both lock up solid
You need to post cool pics Travis :D
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
- Gunslinger
- Member
- Posts: 869
- Joined: Fri Sep 17, 2010 2:45 am
- Location: Missouri USA Earth
- Contact:
- chuck_roxas45
- Member
- Posts: 8776
- Joined: Wed Mar 03, 2010 5:43 pm
- Location: Small City, Philippines
Cut off the old nozzle of a hose so I could replace it with a new one. Used my blue para.
http://uproxx.files.wordpress.com/2014/ ... ot-gif.gif" target="_blank
The other day I was checking the gate on my backyard fence because it wouldn't close properly. ( treated lumber that has dried and warped a bit over time. )
I did a few things and tried adjusting things with the tools I have but nothing was going to work. I was going to have to borrow a wood plane from my dad in law...
As I was walking away, I realized my Para2 was in my pocket so I whipped it out and went at that gate and post in all the areas where it was rubbing. 5 minutes later, I had a big pile of shavings on the ground and my fence closed nicely...
I was actually amazed at how easily that thing sliced through that wood and the edge was still very sharp afterwards. I've been using a Wicked Edge since Christmas and I have to say that the final stropping step that I never used to do seems to have a huge effect on edge retention.
I did a few things and tried adjusting things with the tools I have but nothing was going to work. I was going to have to borrow a wood plane from my dad in law...
As I was walking away, I realized my Para2 was in my pocket so I whipped it out and went at that gate and post in all the areas where it was rubbing. 5 minutes later, I had a big pile of shavings on the ground and my fence closed nicely...
I was actually amazed at how easily that thing sliced through that wood and the edge was still very sharp afterwards. I've been using a Wicked Edge since Christmas and I have to say that the final stropping step that I never used to do seems to have a huge effect on edge retention.
-
- Member
- Posts: 1394
- Joined: Mon Nov 28, 2011 9:39 pm
- Location: Colombo, Sri Lanka
So I was feeling a tad gloomy due to the few issues I had with my SB Caly 3.5 today. Used it to cut up a larger box and make a smaller one to ship the Caly to Spyderco in.
The smaller box came out rather well. So packed the Caly in it and took it to the post office to post it. As usual, post office has rules and my own box could not be used. So had to buy another box (which was incidentally the same size as the one I cut up) to put the smaller box in for posting. Oh well, day was really getting very gloomy now. At least I had fun making the smaller box.
So posted it to Spyderco today in a box with much stuffing as I could find so that the actual Caly don't bounce about too much. Apologies in advance to Spyderco staff who will be opening it when received.
The smaller box came out rather well. So packed the Caly in it and took it to the post office to post it. As usual, post office has rules and my own box could not be used. So had to buy another box (which was incidentally the same size as the one I cut up) to put the smaller box in for posting. Oh well, day was really getting very gloomy now. At least I had fun making the smaller box.
So posted it to Spyderco today in a box with much stuffing as I could find so that the actual Caly don't bounce about too much. Apologies in advance to Spyderco staff who will be opening it when received.
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
-
- Member
- Posts: 1394
- Joined: Mon Nov 28, 2011 9:39 pm
- Location: Colombo, Sri Lanka
Nice info on knife usage Jet B. What was the blade metal please?Jet B wrote:The other day I was checking the gate on my backyard fence because it wouldn't close properly. ( treated lumber that has dried and warped a bit over time. )
I did a few things and tried adjusting things with the tools I have but nothing was going to work. I was going to have to borrow a wood plane from my dad in law...
As I was walking away, I realized my Para2 was in my pocket so I whipped it out and went at that gate and post in all the areas where it was rubbing. 5 minutes later, I had a big pile of shavings on the ground and my fence closed nicely...
I was actually amazed at how easily that thing sliced through that wood and the edge was still very sharp afterwards. I've been using a Wicked Edge since Christmas and I have to say that the final stropping step that I never used to do seems to have a huge effect on edge retention.
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.
I used my G-10 ZDP Delica to open some mail and showed it to my son. Nothing special
CF Balance, CF Caly3 ZDP, Caly 3.5 SB, CAT 440C, Chaparral, Orange Jigged Damascus Delica, Blue Jigged Damascus Delica, BRG Delica ZDP(SOON TO BE G-10!), FG G-10 DragonFly, Gayle Bradley, 2012 Jester, H1 Ladybug Salt Hawkbill w/G-10 scales, Tan Manix 2 M4, MoonGlow Manix 2, C22CF Michael Walker, BRN Millie XHP, Native 5, PM2, All Black PM2, Gray PM2 20CP, Blue PM2 M390, Sage 1, Sage 2, Sage 4, Terzuola, CF Stretch ZDP, UKPK Drop Point
-
- Member
- Posts: 1394
- Joined: Mon Nov 28, 2011 9:39 pm
- Location: Colombo, Sri Lanka
I am carrying the PPT today. Just a tad displeased that I did not get a chance to use the knife except for this staged photo taken with the iPhone.
:spyder: Centofante3 (C66PBK3), ParaMilitary2 (C81GPCMO), Endura4 (C10P), GrassHopper (C138P), Military (C36GPCMO), Perrin PPT (C135GP), Squeak (C154PBK), Dragonfly 2 Salt (C28PYL2), Military M390 CF (C36CFM390P), R (C67GF), ParaMilitary2 CTS-XHP (C81GPOR2), Tuff (C151GTIP), Ladybug & Perrin Street Bowie (FB04PBB)being the newest.