What a nice surprise

Discuss Spyderco's products and history.
User avatar
Seanski
Member
Posts: 341
Joined: Mon Jun 01, 2009 12:01 am
Location: Chilliwack, B.C Canada

What a nice surprise

Postby Seanski » Tue Feb 08, 2011 7:09 pm

I guess, I should peruse the forums a little more often, however, I'm trying to pull myself away from the computer more often which isn't necessarily a bad thing. :o

I decided I'd go into my local knife shop and picked up a Spyderco Salt 1, and did not realize, until holding it that they are now sporting torx adjustable pivots!

Great job Spyderco, what a super addition to a wonderful knife. :)

Sean
Use your blades in the kitchen, it's great bonding time!

User avatar
coelacanth
Member
Posts: 63
Joined: Thu Jan 13, 2011 2:42 am
Location: SF, CA, USA

Postby coelacanth » Tue Feb 08, 2011 7:41 pm

Congrats on the new Spydie, and thanks very much for the heads up.

I've read Endura-sized Salt switched to screw construction a while ago but wasn't sure about Delica-sized ones like Salt 1. Good to know! :)
Delica Orange Jigged Bone, Manix2 Orange FFG, Poliwog G-10, Salt I PE Black, Chaparral

User avatar
Seanski
Member
Posts: 341
Joined: Mon Jun 01, 2009 12:01 am
Location: Chilliwack, B.C Canada

Postby Seanski » Tue Feb 08, 2011 7:52 pm

You are welcome. :)
Use your blades in the kitchen, it's great bonding time!

.357 mag
Member
Posts: 1258
Joined: Tue Dec 07, 2010 4:29 pm

Postby .357 mag » Tue Feb 08, 2011 8:12 pm

Seanski wrote:I guess, I should peruse the forums a little more often, however, I'm trying to pull myself away from the computer more often which isn't necessarily a bad thing. :o

I decided I'd go into my local knife shop and picked up a Spyderco Salt 1, and did not realize, until holding, it that they are now sporting torx adjustable pivots!

Great job Spyderco, what a super addition to a wonderful knife. :)

Sean
It doesn't count without pictures!! :p

User avatar
Seanski
Member
Posts: 341
Joined: Mon Jun 01, 2009 12:01 am
Location: Chilliwack, B.C Canada

Postby Seanski » Tue Feb 08, 2011 10:24 pm

Here are a couple I took quickly.
Attachments
Salt1 006.JPG
Salt1 006.JPG (51.06 KiB) Viewed 790 times
Salt1 005.JPG
Salt1 005.JPG (54.38 KiB) Viewed 816 times
Use your blades in the kitchen, it's great bonding time!

Whieee
Member
Posts: 214
Joined: Thu Apr 02, 2009 1:59 pm
Location: Woubrugge, the Netherlands

Postby Whieee » Wed Feb 09, 2011 5:14 am

Now that's great news! Now I have to replace all my Salts with newer versions :D

(j/k ofcourse ;) )

User avatar
Seanski
Member
Posts: 341
Joined: Mon Jun 01, 2009 12:01 am
Location: Chilliwack, B.C Canada

Postby Seanski » Wed Feb 09, 2011 10:02 am

Where ever you order maybe specify if you can, that you want the adjustable pivots,
because where I was a yellow one was pulled out and it was pinned. It's the "first in is
first out" doesn't necessarily apply to knife stock. :)
Use your blades in the kitchen, it's great bonding time!


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: 5-by-5, Doc Dan, JD Spydo, Larrin, toocool006, Wartstein and 34 guests