So... what did I miss??
-
- Member
- Posts: 2050
- Joined: Fri Sep 24, 2004 10:33 am
- Location: USA
Howdy Kahz! Welcome back! <img src="smile.gif" width=15 height=15 align=middle border=0>
I haven't e-seen Clay for a while, he went missing right around that flap about Spyderholic's signature.
Straight As, quite impressive. Go buy yourself a new <img src="spyder.gif" width=15 height=15 align=middle border=0> to celebrate! Now, what else...
Not too much has happened, honestly. However, there's always plenty of reading for you to catch up with.
--PS-- Your <img src="spyder.gif" width=15 height=15 align=middle border=0>Telepathy must work. I'm working on digging up the money for El Ratón as you read this! <img src="smile.gif" width=15 height=15 align=middle border=0><img src="spyder.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0>
Keepin' it real...real sharp, that is.
I haven't e-seen Clay for a while, he went missing right around that flap about Spyderholic's signature.
Straight As, quite impressive. Go buy yourself a new <img src="spyder.gif" width=15 height=15 align=middle border=0> to celebrate! Now, what else...
Not too much has happened, honestly. However, there's always plenty of reading for you to catch up with.
--PS-- Your <img src="spyder.gif" width=15 height=15 align=middle border=0>Telepathy must work. I'm working on digging up the money for El Ratón as you read this! <img src="smile.gif" width=15 height=15 align=middle border=0><img src="spyder.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0>
Keepin' it real...real sharp, that is.
Sword,
I should get myself a new Spydie but, it will have to wait once I move. Too much in my expense book lately. <img src="tongue.gif" width=15 height=15 align=middle border=0> <img src="wink.gif" width=15 height=15 align=middle border=0>
So, the Mouse, right? Hee, hee... *evil grin* You are so infected... <img src="spyder.gif" width=15 height=15 align=middle border=0>
Kahz
I should get myself a new Spydie but, it will have to wait once I move. Too much in my expense book lately. <img src="tongue.gif" width=15 height=15 align=middle border=0> <img src="wink.gif" width=15 height=15 align=middle border=0>
So, the Mouse, right? Hee, hee... *evil grin* You are so infected... <img src="spyder.gif" width=15 height=15 align=middle border=0>
Kahz
-
- Member
- Posts: 574
- Joined: Fri Sep 24, 2004 10:33 am
- Location: El Paso, TX
Kahz,
Again, welcome back. Spydernut forgot to tell you that he also infected his brother with the <img src="spyder.gif" width=15 height=15 align=middle border=0> virus. (I hope they never come up with an inoculation for it).
Linda
<img src="http://www.spyderco.com/forum/spyder.gif" border=O> Integrity is being good even if no-one else is watching <img src="http://www.spyderco.com/forum/spyder.gif" border=O>
Again, welcome back. Spydernut forgot to tell you that he also infected his brother with the <img src="spyder.gif" width=15 height=15 align=middle border=0> virus. (I hope they never come up with an inoculation for it).
Linda
<img src="http://www.spyderco.com/forum/spyder.gif" border=O> Integrity is being good even if no-one else is watching <img src="http://www.spyderco.com/forum/spyder.gif" border=O>
- vampyrewolf
- Member
- Posts: 7486
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Saskatoon, Saskatchewan, Canada
If you want a god Canadian Spydie dealer, use mine... lots of discontinued and rare spydies(still has a Large Micarta Calypso, and CF Civvie(last I knew))...
Cutting Edge Cutlery Co
1-306-374-3433
swords.ca
3 locations, Regina/Saskatoon/Calgary, main storage in Saskatoon. Prices are pretty decent. Just ask one of the ppl on the CF rush!
<img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf> We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare... <img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf>
Cutting Edge Cutlery Co
1-306-374-3433
swords.ca
3 locations, Regina/Saskatoon/Calgary, main storage in Saskatoon. Prices are pretty decent. Just ask one of the ppl on the CF rush!
<img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf> We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare... <img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf>
Thanks for the tips! BTW, I have been checking out Canadian knife laws and, apparently, knives that are opened via a hole on the blade are not illegal. I just don't know if there is a length limit. Can anyone shed some light about this? I don't want to have any problems when going through customs with illegal carry. I will appreciate any help. <img src="smile.gif" width=15 height=15 align=middle border=0>
Kahz
I love <img src="spyder.gif" width=15 height=15 align=middle border=0> and rock and roll!
Kahz
I love <img src="spyder.gif" width=15 height=15 align=middle border=0> and rock and roll!
- SpyderNut
- Member
- Posts: 8431
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Hoosier Country, USA
- Contact:
Kahz,
Oh man, this doesn't look good....I just got done reading some Canadian knife laws and from what I read, any knife that has a blade length of over 2 3/4" is considered illegal when concealed. So, if I were you, I would just send all your Spydies down to the loving residence of one called Spydernut, in Indiana, so that he can keep them from getting you in any trouble.<img src="wink.gif" width=15 height=15 align=middle border=0>
**Leaning forward eagerly**
Well, it ALMOST worked. <img src="tongue.gif" width=15 height=15 align=middle border=0>
Hee hee! Just teasin' Kahz.
Spydernut
Oh man, this doesn't look good....I just got done reading some Canadian knife laws and from what I read, any knife that has a blade length of over 2 3/4" is considered illegal when concealed. So, if I were you, I would just send all your Spydies down to the loving residence of one called Spydernut, in Indiana, so that he can keep them from getting you in any trouble.<img src="wink.gif" width=15 height=15 align=middle border=0>
**Leaning forward eagerly**
Well, it ALMOST worked. <img src="tongue.gif" width=15 height=15 align=middle border=0>
Hee hee! Just teasin' Kahz.
Spydernut
SpyderNut,
Nice try... <img src="tongue.gif" width=15 height=15 align=middle border=0>
Well, this may be one of my last if not my last post for the next few months. I have limited time to plan the move so, once I am settled in my new hometown, [insert Arnold Schwartwhatever accent here] "I'll be back!"
Kahz, the traveling SpyderLady
Nice try... <img src="tongue.gif" width=15 height=15 align=middle border=0>
Well, this may be one of my last if not my last post for the next few months. I have limited time to plan the move so, once I am settled in my new hometown, [insert Arnold Schwartwhatever accent here] "I'll be back!"
Kahz, the traveling SpyderLady
- vampyrewolf
- Member
- Posts: 7486
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Saskatoon, Saskatchewan, Canada
Depends on the area, just like in the states... Saskatchewan is pretty easy.
6" fixed on the belt, completely visible, will get you less of a look than a 4" on thw belt with the bottom visible.
Basically:
-4" is allowed in the pocket
-6" is allowed on belt
-fixed should be nearly out in the open(I wear a vest and the handle is covered, sheath is visible)
-clip carry IS NOT concidered illegal
-NO AUTOS(I still have my LCC D/A)
-Don't show bootknives, might be illegal, don't know...
-cheap bylaw in sask at least: If you can prove peaceful intent, it's legal... Machette, peanutbutter jar, and bread anyone?
If you carry anything excessive, you have some explaining to do. Especially if they see a glint as a cop drives by(ie no swords).
<img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf> We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare... <img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf>
Edited by - vampyrewolf on 4/4/2002 11:28:35 AM
6" fixed on the belt, completely visible, will get you less of a look than a 4" on thw belt with the bottom visible.
Basically:
-4" is allowed in the pocket
-6" is allowed on belt
-fixed should be nearly out in the open(I wear a vest and the handle is covered, sheath is visible)
-clip carry IS NOT concidered illegal
-NO AUTOS(I still have my LCC D/A)
-Don't show bootknives, might be illegal, don't know...
-cheap bylaw in sask at least: If you can prove peaceful intent, it's legal... Machette, peanutbutter jar, and bread anyone?
If you carry anything excessive, you have some explaining to do. Especially if they see a glint as a cop drives by(ie no swords).
<img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf> We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare... <img src=http://us.f1.yahoofs.com/users/372fcedb ... 8A88UxWudf>
Edited by - vampyrewolf on 4/4/2002 11:28:35 AM
- 4 s ter
- Member
- Posts: 2056
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Sault Ste. Marie, Ontario Canada
Kahz
The following link will take you to a reasonably plain-talk discussion of knife related legislation in Canada.
http://www.physics.mun.ca/~sstamp/knives/canada.html
Basically, concealed carry is not allowed - but a SAK in the pocket or clip carry isn't generally a problem.
Carrying a knife for "self defense" is not allowed - but for use as a tool is OK. Therefore it is a lot easier to explain why you are carrying an Endura than a Matriarch
Hope your move goes well! Most of the snow in S. Ontario should be gone soon - but not up here in the North <img src="sad.gif" width=15 height=15 align=middle border=0>
The following link will take you to a reasonably plain-talk discussion of knife related legislation in Canada.
http://www.physics.mun.ca/~sstamp/knives/canada.html
Basically, concealed carry is not allowed - but a SAK in the pocket or clip carry isn't generally a problem.
Carrying a knife for "self defense" is not allowed - but for use as a tool is OK. Therefore it is a lot easier to explain why you are carrying an Endura than a Matriarch
Hope your move goes well! Most of the snow in S. Ontario should be gone soon - but not up here in the North <img src="sad.gif" width=15 height=15 align=middle border=0>
-
- Member
- Posts: 2050
- Joined: Fri Sep 24, 2004 10:33 am
- Location: USA
Oddly enough, my other post didn't show up, so I'll try again.
Kahz- I'll make sure to keep a spare gurney open in the SpyderAddicts Treatment Center (TM) for you! <img src="smile.gif" width=15 height=15 align=middle border=0> Pop on here if and when you get a chance, libraries are so convenient. Or, you could always beg access from some poor guy on the street! <img src="wink.gif" width=15 height=15 align=middle border=0>
Your civilizing influence will be sorely missed, but I'll try to maintain everyone's brittle sanity whilst you're gone! <img src="smile.gif" width=15 height=15 align=middle border=0>
Keepin' it real...real sharp, that is.
Kahz- I'll make sure to keep a spare gurney open in the SpyderAddicts Treatment Center (TM) for you! <img src="smile.gif" width=15 height=15 align=middle border=0> Pop on here if and when you get a chance, libraries are so convenient. Or, you could always beg access from some poor guy on the street! <img src="wink.gif" width=15 height=15 align=middle border=0>
Your civilizing influence will be sorely missed, but I'll try to maintain everyone's brittle sanity whilst you're gone! <img src="smile.gif" width=15 height=15 align=middle border=0>
Keepin' it real...real sharp, that is.
- Clay Kesting
- Member
- Posts: 1241
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Sydney Australia
G'day Kahz,
How're ya going? Nice to see you back again. I haven't been around much lately. I wandered off when there were all these peasants bleeding all over my screen and it's taken a while to find my way back. These things happen as you get older <img src="smile.gif" width=15 height=15 align=middle border=0>. Luckily I made it back in time to order a Forum Vesuvius. I haven't bought any other knives lately but I have just bought a share in a ski lodge in the highest resort in the pimples we call a mountain range. So you better work on your skiing in Canada so you can check out my lodge when you come to Oz (you are coming down here aren't you <img src="smile.gif" width=15 height=15 align=middle border=0>).
Clay
Life's too short to waste on instant coffee.
How're ya going? Nice to see you back again. I haven't been around much lately. I wandered off when there were all these peasants bleeding all over my screen and it's taken a while to find my way back. These things happen as you get older <img src="smile.gif" width=15 height=15 align=middle border=0>. Luckily I made it back in time to order a Forum Vesuvius. I haven't bought any other knives lately but I have just bought a share in a ski lodge in the highest resort in the pimples we call a mountain range. So you better work on your skiing in Canada so you can check out my lodge when you come to Oz (you are coming down here aren't you <img src="smile.gif" width=15 height=15 align=middle border=0>).
Clay
Life's too short to waste on instant coffee.
Wow Kahz. I think you've gotten more posts than almost any recent thread I've seen. Cool. Good luck and enjoy. <img src="smile.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0>
Jaxon
Weekend yet?
Jaxon
Weekend yet?
- Joyce Laituri
- Member
- Posts: 906
- Joined: Fri Sep 24, 2004 1:00 pm
- Location: Golden, CO USA