Spyderco fakes?
-
- Member
- Posts: 356
- Joined: Wed May 30, 2007 6:47 pm
- Location: Markham, Ontario, Canada, Earth
I wouldn't go as far as 'fake' just not licenced/allowed.
I BLEED TOXIC GREEN
:spyder: SPYDIE NUT :spyder:
:spyder: Spyderco OG Manix PE
:spyder: Spyderco Black Dodo SE *gone*
:spyder: Spyderco Black Paramilitary PE *gone*
:spyder: Spyderco SPOT PE *gone*
:spyder: Spyderco OG Blackhawk SE *gone*
:spyder: Spyderco Ladybug/Photon *gone*
:spyder: SPYDIE NUT :spyder:
:spyder: Spyderco OG Manix PE
:spyder: Spyderco Black Dodo SE *gone*
:spyder: Spyderco Black Paramilitary PE *gone*
:spyder: Spyderco SPOT PE *gone*
:spyder: Spyderco OG Blackhawk SE *gone*
:spyder: Spyderco Ladybug/Photon *gone*
Free Radical,
Thank you for the heads-up. Those were not authorized. We're on it.
On that note, we really do appreciate all of you looking out for us. There is no way for us to actively search for things like this. So, it really is a huge help when you all bring things like this to our attention.
Thanx Much!!
Kristi
Thank you for the heads-up. Those were not authorized. We're on it.
On that note, we really do appreciate all of you looking out for us. There is no way for us to actively search for things like this. So, it really is a huge help when you all bring things like this to our attention.
Thanx Much!!
Kristi
There is nothing more important than this one day.
-
- Member
- Posts: 47
- Joined: Thu Jan 22, 2009 9:29 am
i think $15 is a little expensive for those. cause once you get the mold, just cut from sheet steel. or am i missing something?
or how about sharpening the edges and sell them as throwing stars, nay, throwing SPYDERS!!! :p :p :rolleyes: :eek:
or how about sharpening the edges and sell them as throwing stars, nay, throwing SPYDERS!!! :p :p :rolleyes: :eek:
Proud owner of a meadowlark g10!! :spyder:
:rolleyes: Guilty :pslice22358 wrote:You and your ball lock obsession:D
There is no mold, each one is laser cut from a sheet of stainless (it says "laser cut" in the description, and I've seen similar stuff done in person).ChaosSpear wrote:i think $15 is a little expensive for those. cause once you get the mold, just cut from sheet steel. or am i missing something?
or how about sharpening the edges and sell them as throwing stars, nay, throwing SPYDERS!!! :p :p :rolleyes: :eek:
I'm wondering, was this a custom order to a metal shop, a custom job by one of the guys that works there, or was it just a shop worker in his off time at the metal shop (and did he pay for the material he used)?
MEMBER OF THE INTERNATIONAL ORDER OF THE SPYDEREDGE
-
- Member
- Posts: 47
- Joined: Thu Jan 22, 2009 9:29 am
good point. but regardless, laser cut or mold cut, they both require minimal (if any) start up cost and no mass production cost (besides electricity and steel of course).
hey, im just petitioning it to cost less!
hey, im just petitioning it to cost less!
Proud owner of a meadowlark g10!! :spyder:
:rolleyes: Guilty :pslice22358 wrote:You and your ball lock obsession:D
- zenheretic
- Member
- Posts: 7545
- Joined: Sun Jul 03, 2005 8:47 am
- Location: USA, Earth
You are petitioning an unauthorized use of a company logo cost less? :confused:ChaosSpear wrote:good point. but regardless, laser cut or mold cut, they both require minimal (if any) start up cost and no mass production cost (besides electricity and steel of course).
hey, im just petitioning it to cost less!
Ethically challenged comes to mind.
Follow the mushin, but pay it no heed.
- tonydahose
- Member
- Posts: 6277
- Joined: Thu Jan 19, 2006 8:56 am
- Location: Chicago
- Contact:
it takes someone to put the logo into something that the CNC machine can read (at least thats how i think it works). when we bought the pen and wooden box with the spydie logo there was a set up fee to program the machine that drilled it out. for the record i had to go thru channels (without Sal knowing, which wasn't to easy) and get :spyder: 's lawyer to approve us making a copy of their logo, even though we were giving it to Sal. This auction is just blatant disregard of a trademark IMO.
WTC #1444 Always Remember
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
- Lord vader
- Member
- Posts: 1599
- Joined: Tue Dec 09, 2008 3:24 pm
- Location: U.S.A.
Apparently the fact that it has 8 legs is just too confusing.LowTEC wrote:They should know better the logo is NOT a ladybug **** it :rolleyes:
I suppose this would be a good place to ask, is it OK to use the spydie symbol if it's for personal use only? Like if I designed a set of those for my own use and didn't try to sell them? Also, what about if I gave a couple to friends as gifts? Would that be infringing on the spydie copyright?
MEMBER OF THE INTERNATIONAL ORDER OF THE SPYDEREDGE
- tonydahose
- Member
- Posts: 6277
- Joined: Thu Jan 19, 2006 8:56 am
- Location: Chicago
- Contact:
WTC #1444 Always Remember
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
Need info on a particular :spyder:, just click here
My knives
Spydie count: a few:D
Poking funcobrajoe wrote:Apparently the fact that it has 8 legs is just too confusing.
I suppose this would be a good place to ask, is it OK to use the spydie symbol if it's for personal use only? Like if I designed a set of those for my own use and didn't try to sell them? Also, what about if I gave a couple to friends as gifts? Would that be infringing on the spydie copyright?
LBK3S|C52BK|C106PYL|745|943|C08CFS|C52m|C36GPBK|C10GPFG|1003UBK2|14210|C123CFP|C81FG
C28WH|1600DAM|C105|RC4S|C51GPFG|1735OR|830675|C90CF|C123TIP|CS97KMS|BRKT-CS|BRKT-MC
BRKT-LC3V|C101XHP
C28WH|1600DAM|C105|RC4S|C51GPFG|1735OR|830675|C90CF|C123TIP|CS97KMS|BRKT-CS|BRKT-MC
BRKT-LC3V|C101XHP
Here's another poliwog fake shown up down under...http://www.trademe.co.nz/Sports/Hunting ... 421536.htm.. this auction site is likely to shut the vendor down if they are known to be selling counterfeit products...
They are also trying to sell it at a ridiculous price,it's $5.99 here Though apparently it takes them forever to ship (A friend ordered one to test against another friend's true Poli)jezabel wrote:Here's another poliwog fake shown up down under...http://www.trademe.co.nz/Sports/Hunting ... 421536.htm.. this auction site is likely to shut the vendor down if they are known to be selling counterfeit products...
MEMBER OF THE INTERNATIONAL ORDER OF THE SPYDEREDGE