Hey Sal how are yah
Reasons why you should come to Canada for a mini meet
1) Tim Hortons Coffee is out of this world :D
2) We say eh quite a lot
3) We Canadians love hockey
4) Did I say we some really really good Coffee
Sal come to Canada for a mini meet, because honestly we would love to have you guys come over. There are a few meets you are doing across the world, and If you can add Canada we would very much appreciate it.
Alright all you Canadians show your support so Sal will have a mini meet in Canada.
take care
aj
Please vote
Come on Sal can we have a mini meet in Canada
Come on Sal can we have a mini meet in Canada
Live in every breath
INTERNATIONAL ORDER OF THE SPYDEREDGE
INTERNATIONAL ORDER OF THE SPYDEREDGE
I think it would be great if this meet will be very close to US border. So :spyder: nuts from New England and NY will be able to join. :p :p
It is quite a few of us. Montreal is a great place.
What do you think?
It is quite a few of us. Montreal is a great place.
What do you think?
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf"
My top choices Natives5, Calys, C83 Persian
My top choices Natives5, Calys, C83 Persian
-
Hunter John
- Member
- Posts: 10
- Joined: Wed Jan 23, 2008 10:19 am
- Location: Ancaster,Ontario
I was thinking Toronto, but would not mind Montreal if it was on a Weekend so I can have a bit of a raod trip :Dbh49 wrote:I think it would be great if this meet will be very close to US border. So :spyder: nuts from New England and NY will be able to join. :p :p
It is quite a few of us. Montreal is a great place.
What do you think?
aj
Live in every breath
INTERNATIONAL ORDER OF THE SPYDEREDGE
INTERNATIONAL ORDER OF THE SPYDEREDGE
-
kodeslinger
- Member
- Posts: 22
- Joined: Thu Dec 06, 2007 9:15 am
-
Spyderwings
- Member
- Posts: 346
- Joined: Sat Jun 23, 2007 10:40 am
- Location: Saskatoon, SK, Canada
I would love to have a meet in Canada. That being said I probably couldn't attend unless it was closer to me. I live in Saskatoon, so its probably not viable to bring it there...except that its right in the middle of Canada :D
- Jason Dalsgaard
Current Spyders > C81GPBK Para-Military > C14SBK Rescue 93mm > C11P Delica 4 > FB05P Temperance > C29S Cricket > C14OR Full Sized Rescue > C90CF Stretch II > C12SBK Matriarch (VG-10)
Current Spyders > C81GPBK Para-Military > C14SBK Rescue 93mm > C11P Delica 4 > FB05P Temperance > C29S Cricket > C14OR Full Sized Rescue > C90CF Stretch II > C12SBK Matriarch (VG-10)
-
4 s ter
- Member
- Posts: 2056
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Sault Ste. Marie, Ontario Canada
Sorry, if it was in Vancouver, those of us in the east might as well just fly to Golden, Colorado (closer and cheaper) :confused:kodeslinger wrote:I vote for Vancouver, where the biggest seller of Spydercos in Canada is :P
David
"Not all who wander are lost"
"To liner or not to liner? That is the question?" -- Sal
"Rule number nine: always carry a knife." -- Special Agent Jethro Gibbs/NCIS
"Not all who wander are lost"
"To liner or not to liner? That is the question?" -- Sal
"Rule number nine: always carry a knife." -- Special Agent Jethro Gibbs/NCIS
-
kodeslinger
- Member
- Posts: 22
- Joined: Thu Dec 06, 2007 9:15 am
There is a a Canadian Knife maker Guild show happening in March. Is it possible for Spyderco to attend as well.
Please have the mini meet in Toronto, because thats where I live and I am a life time customer of Spyderco :D . Also there are very good Indian restaurants in the area :p . Can you say butter chicken :rolleyes:
aj
Please have the mini meet in Toronto, because thats where I live and I am a life time customer of Spyderco :D . Also there are very good Indian restaurants in the area :p . Can you say butter chicken :rolleyes:
aj
Live in every breath
INTERNATIONAL ORDER OF THE SPYDEREDGE
INTERNATIONAL ORDER OF THE SPYDEREDGE
I vote for Vancouver. Better weather and there are lots of Lotus Europas and Elans running about.
Regards, Al
The "soul" of hi-tech materials like G-10, H1, ZDP, Titanium, carbon fiber, etc is found in the performance. That appreciation of the "spirit" comes out in time, after use. It's saying, you can depend on me! I'm there for you no matter what! - Sal Glesser
The "soul" of hi-tech materials like G-10, H1, ZDP, Titanium, carbon fiber, etc is found in the performance. That appreciation of the "spirit" comes out in time, after use. It's saying, you can depend on me! I'm there for you no matter what! - Sal Glesser
since all five of us are going to vote for our own provinces, it should be a nation wide tour, stopping at the capital of each province (I would say territories as well, but I'm not sure if Sal could get everything up to Iqaluit in one Cessna.).
Or just Ontario and B.C. that would at least cover the two largest population bases.
Or just Ontario and B.C. that would at least cover the two largest population bases.
-
cyberspyder
- Member
- Posts: 356
- Joined: Wed May 30, 2007 6:47 pm
- Location: Markham, Ontario, Canada, Earth
-
vampyrewolf
- Member
- Posts: 7486
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Saskatoon, Saskatchewan, Canada
It'll have to wait a bit before I can afford the trip, never mind buy a new knife... just dumped a paycheck on a new laptop here.
That said... the first 2 weeks of july I'm off work, and wouldn't mind a trip to toronto if it means seeing new toys.
That said... the first 2 weeks of july I'm off work, and wouldn't mind a trip to toronto if it means seeing new toys.
Coffee before Conciousness
Why do people worry more if you argue with your voices than if you just talk with them? What about if you lose those arguements?
Slowly going crazy at work... they found a way to make the voices work too.
Why do people worry more if you argue with your voices than if you just talk with them? What about if you lose those arguements?
Slowly going crazy at work... they found a way to make the voices work too.
-
JacksonKnives
- Member
- Posts: 837
- Joined: Thu Jan 10, 2008 8:28 pm
- Location: Alberta, Canada
- Contact:
Prairie Knife Nuts Represent!
Even if Sal&Co. can't make it, I'd be up for a Prairie-Provinces meet if people want to hang out. A Cypress Hills campout, maybe? Not exactly "central" for those of us in the Edmonton/Saskatoon region, but it's a nice place to do some Mule-testing around the campfire. :D
Maybe one or two of us could even head down to Golden and negotiate to bring back some promotional goodies for those who can't make the trip...
I'll go anywhere that I can make in a day on my motorcycle. :cool:
Maybe one or two of us could even head down to Golden and negotiate to bring back some promotional goodies for those who can't make the trip...
I'll go anywhere that I can make in a day on my motorcycle. :cool:
—Daniel Jackson
-
Spyderwings
- Member
- Posts: 346
- Joined: Sat Jun 23, 2007 10:40 am
- Location: Saskatoon, SK, Canada
Hey, we got another Saskatonian here!lc1 wrote:It would be great to have a meet in Canada. I am in Saskatoon as well but would try my best to fly to whatever centre is chosen for the meet.
- Jason Dalsgaard
Current Spyders > C81GPBK Para-Military > C14SBK Rescue 93mm > C11P Delica 4 > FB05P Temperance > C29S Cricket > C14OR Full Sized Rescue > C90CF Stretch II > C12SBK Matriarch (VG-10)
Current Spyders > C81GPBK Para-Military > C14SBK Rescue 93mm > C11P Delica 4 > FB05P Temperance > C29S Cricket > C14OR Full Sized Rescue > C90CF Stretch II > C12SBK Matriarch (VG-10)
I vote for Montreal.... and then somewhere on the west side......
Simon
Simon
"Everyday above the ground and vertical is a good day".
-Sir A. Hopkins in "The world's Fastest Indian"
"If it hurts, it means you're not dead..."
-Kayakist Marie-Pier Cote
The Spyderco Cookbook
-Sir A. Hopkins in "The world's Fastest Indian"
"If it hurts, it means you're not dead..."
-Kayakist Marie-Pier Cote
The Spyderco Cookbook