Discuss Spyderco's products and history.
cutler34
Member
Posts: 178 Joined: Fri Sep 24, 2004 10:33 am
Location: Australia
Contact:
#101
Post
by cutler34 » Thu Sep 27, 2001 4:43 pm
Love the Vesuvius idea Sal. Plain edge with a burgundy frn and a silver bug inlay.
White frn is very cool too.
Regards
Ricki
info@outdooredge.com.au
Spyderco Club Member
vampyrewolf
Member
Posts: 7486 Joined: Fri Sep 24, 2004 10:33 am
Location: Saskatoon, Saskatchewan, Canada
#102
Post
by vampyrewolf » Thu Sep 27, 2001 5:13 pm
*white scales*
silver bug
-or-
red/white/blue bug inlay
-or-
the shell inlay, cut into a bug shape
all would catch your eye, and I would be proud to show it off.
great idea sal!
We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare...
Carlos
Member
Posts: 1734 Joined: Fri Sep 24, 2004 10:33 am
Location: Phoenix USA
#103
Post
by Carlos » Thu Sep 27, 2001 7:03 pm
White FRN (I think "Ivory" would be preferable, if such a thing exists) with a silver bug and a polished steel clip.
Count me in.
I suggest minimizing the engraving on the blade since it is a small blade.
How about:
Forum Edition
or
Spyderco Forum '02
Edited by - Carlos on 9/27/2001 9:33:57 PM
J Smith
Member
Posts: 7105 Joined: Fri Sep 24, 2004 10:33 am
Location: Harriman TN USA
#104
Post
by J Smith » Thu Sep 27, 2001 10:53 pm
I'll take whatever is produced but i am not fond of white FRN . Would rather see burgundy,blue,red or green with silver bug and clip.
Jeff
Mr Blonde
Member
Posts: 7658 Joined: Fri Sep 24, 2004 10:33 am
Location: The Netherlands, Europe, Earth
Contact:
#105
Post
by Mr Blonde » Fri Sep 28, 2001 9:32 am
A Vesuvius with a SS Spyder inlay is very cool. White FRN is OK by me, but I would choose blue or dark green.
Wouter
Carlos
Member
Posts: 1734 Joined: Fri Sep 24, 2004 10:33 am
Location: Phoenix USA
#106
Post
by Carlos » Fri Sep 28, 2001 12:04 pm
Okay, my understanding is that FRN Spydercos made in the US use Zytel, while Japan made Spydercos use Grivory. I checked and confirmed that Dupont does make ivory-coloured Zytel. I've posted an image below.
I think ivory would wear better over time than white for a knife that would get used.
What do you guys think?
I'd prefer ivory, but I could live with white.
Edited by - Carlos on 9/28/2001 12:13:00 PM
Carlos
Member
Posts: 1734 Joined: Fri Sep 24, 2004 10:33 am
Location: Phoenix USA
#107
Post
by Carlos » Fri Sep 28, 2001 12:04 pm
DDP
Edited by - Carlos on 9/28/2001 12:06:05 PM
Fozzy
Member
Posts: 238 Joined: Fri Sep 24, 2004 10:33 am
Location: Massachusetts USA
#108
Post
by Fozzy » Sat Sep 29, 2001 2:17 pm
I have no really strong preference as to which model we see- I would like to see a green (more like forest than O.D.) FRN handle. In reading prior posts to this thread I noted some interest in "Q" and "R" models. Sal, how feasible would it be to do a laser cut-out (Bug or year or ???) in the blade of say, a delica?
Just a thought 'cuz I'm getting at least one no matter what the knife turns out to be!! :D
Ben
"No good deed goes unpunished."
Clay Kesting
Member
Posts: 1241 Joined: Fri Sep 24, 2004 10:33 am
Location: Sydney Australia
#109
Post
by Clay Kesting » Sat Sep 29, 2001 5:53 pm
I'm with Carlos, an off-white colour like bone or ivory would look better and also provide better contrast with the silver bug.
Clay
Don't worry that the world might end tomorrow, in Australia it's tomorrow already.
aero_student
Member
Posts: 735 Joined: Fri Sep 24, 2004 10:33 am
Location: Folsom, CA, USA, Earth USA
#110
Post
by aero_student » Sat Sep 29, 2001 7:45 pm
Why not some thing a little more patriotic. Red white and blue in the handle maybe. Something meaningful lazer engraved on the blade.
sam the man..
Member
Posts: 2936 Joined: Fri Sep 24, 2004 10:33 am
Location: Kuala Lumpur Malaysia
#111
Post
by sam the man.. » Sat Sep 29, 2001 11:49 pm
How much would you guys fork out for this baby?
Sam
have spydies will travel
vampyrewolf
Member
Posts: 7486 Joined: Fri Sep 24, 2004 10:33 am
Location: Saskatoon, Saskatchewan, Canada
#112
Post
by vampyrewolf » Sun Sep 30, 2001 9:01 am
I'm thinking the $100 US range... 1.5can=1us... so 150 or so up here.
We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare...
patogordo
Member
Posts: 488 Joined: Fri Sep 24, 2004 10:33 am
Location: Monterrey Mexico
Contact:
#113
Post
by patogordo » Sun Sep 30, 2001 10:39 am
i could go to 150 of so, but I need to buy the temperance before <img src="smile.gif" width=15 height=15 align=middle>
I want all of them
aero_student
Member
Posts: 735 Joined: Fri Sep 24, 2004 10:33 am
Location: Folsom, CA, USA, Earth USA
#114
Post
by aero_student » Sun Sep 30, 2001 10:40 am
I have have seen the regular production model for $56.18 at Newgraham. I think between $80-$90 would probably be fair.
Eclipse
Member
Posts: 100 Joined: Fri Sep 24, 2004 10:33 am
Location: USA
#115
Post
by Eclipse » Mon Oct 01, 2001 1:41 pm
I think the blue handle with a red/white inlayed sypder would be perfect.
aero_student
Member
Posts: 735 Joined: Fri Sep 24, 2004 10:33 am
Location: Folsom, CA, USA, Earth USA
#116
Post
by aero_student » Mon Oct 01, 2001 6:42 pm
No offense but the white and ivory look horrible. In light of recent occurences I really feel that it should be patriotic. The ivory looks just so fake and plastic and cheap. I think it would be very out of character on a Spyderco knife and it just wouldn't be right.
Brian Lavin
Member
Posts: 69 Joined: Fri Sep 24, 2004 10:33 am
Location: San Diego, Ca. USA
#117
Post
by Brian Lavin » Mon Oct 01, 2001 9:43 pm
Spyderholic has a great idea, some variation on that theme that Sal approves of would be fine with me.
KnifeknutDedicated ELU
J Smith
Member
Posts: 7105 Joined: Fri Sep 24, 2004 10:33 am
Location: Harriman TN USA
#118
Post
by J Smith » Mon Oct 01, 2001 11:08 pm
Blue handle with red white and blue bug or shell bug is fine with me.
Sal when do you think something might be produced?
Jeff