Hi everyone! I'm new here, but I've been a Spyderco fan for some time.
However,I have a question about some of the knives. I have quite a few Spyderco knives and have noticed that the Calypso Jr. Lightweight and the Tim Wegner both say "Japan" when the rest of my Spydies say "Seki City, Japan". I'm curious as to why there is a diference.
Thanks in advance for the help!
Which sharpener to get...
-
- Member
- Posts: 103
- Joined: Fri Sep 24, 2004 10:33 am
- Location: New York USA
-
- Member
- Posts: 103
- Joined: Fri Sep 24, 2004 10:33 am
- Location: New York USA
- vampyrewolf
- Member
- Posts: 7486
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Saskatoon, Saskatchewan, Canada
Welcome aboard.
I would recommend a 204 for sharpening.
I use a 2" section of Fine 204 rod for my serrations, and a DoubleStuff sharpener myself... plan to get a 204 soon for my growing number of spydies.
We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare...
I would recommend a 204 for sharpening.
I use a 2" section of Fine 204 rod for my serrations, and a DoubleStuff sharpener myself... plan to get a 204 soon for my growing number of spydies.
We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare...
-
- Member
- Posts: 2936
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Kuala Lumpur Malaysia
Hi BladeMaster and welcome!
Get the Spyderco Tri-Angle Sharpmaker 204, this is the best sharpening system on the market regarding getting the best bang for your bucks.
It takes some time to learn how to sharpen correctly. However, once you´ve got it, you´ll never forget. And the result is great!
BTW, next year, the 204 will be available with a coarser, diamond coated stone. This one will speed up the initial sharpening and save a lot of time!
Spyderco Collectors Club Member #57
Get the Spyderco Tri-Angle Sharpmaker 204, this is the best sharpening system on the market regarding getting the best bang for your bucks.
It takes some time to learn how to sharpen correctly. However, once you´ve got it, you´ll never forget. And the result is great!
BTW, next year, the 204 will be available with a coarser, diamond coated stone. This one will speed up the initial sharpening and save a lot of time!
Spyderco Collectors Club Member #57
Hi Blademaster, welcome to the forum.
Regarding the country of origin markings, different makers prefer to use different markings.
Regarding the sharpener, the 204 Sharpmaker is the easiest to use, the cleanest, the most versatile and the most bang for the buck, IMO.
If you are really going to be a blademaster, then sooner or later, you should learn to use a flat stone. It is a fun skill to develop. But, once you develop that skill, and I have, you will probably still use the 204 sharpmaker because of the above reeasons.
sal
Regarding the country of origin markings, different makers prefer to use different markings.
Regarding the sharpener, the 204 Sharpmaker is the easiest to use, the cleanest, the most versatile and the most bang for the buck, IMO.
If you are really going to be a blademaster, then sooner or later, you should learn to use a flat stone. It is a fun skill to develop. But, once you develop that skill, and I have, you will probably still use the 204 sharpmaker because of the above reeasons.
sal
- vampyrewolf
- Member
- Posts: 7486
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Saskatoon, Saskatchewan, Canada
Hey, I've been using a flat stone since I was 5, way back 12 yrs ago... Been using the 204 at Cutting Edge for the last yr...
not even 1/2 the time, and it ends up nicely polished to boot using the 204.
We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare...
not even 1/2 the time, and it ends up nicely polished to boot using the 204.
We all start with 10 fingers. Those with Spydies have 9 to spare, Still need a thumb. Good thing I still have 8 to spare...
-
- Member
- Posts: 103
- Joined: Fri Sep 24, 2004 10:33 am
- Location: New York USA
Thanks for the input everyone. I'll definately be going with the 204 Sharpmaker. Actually, I'm very good at using flat stones. I've been collecting knives since I was in first grade, and sharpening on Arkansas stones for just about as long.I am now looking for a way to sharpen mr serrated Spydies. I don't have much experience with "V" shaped sharpeners, but the 204 seems very user friendly.
"I'll be back" - Schwarzenegger, The Terminator
"I'll be back" - Schwarzenegger, The Terminator