Hold onto your biscuits!
Sal's Casual Bombshell Thread
Re: Sal's Casual Bombshell Thread
From the mule board, elastic ceramic thread.
Hold onto your biscuits!
Hold onto your biscuits!
Mule Team Army 001
MNOSD 008
Stable Mules; Z-Max, Z-Wear, Magna Cut, SRS13, Rex 76, Rex T15.
MNOSD 008
Stable Mules; Z-Max, Z-Wear, Magna Cut, SRS13, Rex 76, Rex T15.
Re: Sal's Casual Bombshell Thread
From the "Why is ZDP-189 being phased out" thread:
Re: Sal's Casual Bombshell Thread
I think that's the standard steel for the 3.5
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Re: Sal's Casual Bombshell Thread
Sal just mentioned on this thread about larger straight spine Stretch
viewtopic.php?f=2&t=90809&start=20
Quoting Sal below:
Then I again lengthened the size to a 4.0" blade with a Straight Spine which we are currently tooling up for a FRN version.
And further down in Sals post
We'll probably make a few in different steels.
viewtopic.php?f=2&t=90809&start=20
Quoting Sal below:
Then I again lengthened the size to a 4.0" blade with a Straight Spine which we are currently tooling up for a FRN version.
And further down in Sals post
We'll probably make a few in different steels.
Re: Sal's Casual Bombshell Thread
The Stretch XL has been in development and talked about for nearly 2 years on the forum, but it's cool to know that it is coming soon and that we will get multiple steels!
Can't wait for the K390 or Salt Stretch XL!!
Can't wait for the K390 or Salt Stretch XL!!
So it goes.
Re: Sal's Casual Bombshell Thread
On Magnacut:
Steel came in. Working on a Mule Team run.
The plan is for 2,000 pieces.
Re: Sal's Casual Bombshell Thread
Hey all! Spyderco fanboy and k390 lover. Here’s a few I dream will come to fruition!
Manix 2 G10 k390
Shaman k390
Kapara k390
Smock k390
That’s all!
Manix 2 G10 k390
Shaman k390
Kapara k390
Smock k390
That’s all!
Re: Sal's Casual Bombshell Thread
" I might mention that Eric had a production sample of a Manix / MagnaCut model at dinner tonight."
Sal in the Magnacut Manix thread (viewtopic.php?f=2&t=91254&start=60#p1583913)
Sal in the Magnacut Manix thread (viewtopic.php?f=2&t=91254&start=60#p1583913)
Top three going by pocket-time (update March 24):
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
- EDC: Endura thin red line ffg combo edge (VG10); Wayne Goddard PE (4V), Endela SE (VG10)
-Mountains/outdoors: Pac.Salt 1 SE (H1), Salt 2 SE (LC200N), and also Wayne Goddard PE (4V)
Re: Sal's Casual Bombshell Thread
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
Re: Sal's Casual Bombshell Thread
From the Mule Team Discussion forum - Poll: should mule purchases be limited to just one?
We also have a "production Mule Team" in the works that we'll keep in stock all of the time. Same handle, slightly different spine (a bit more straight) to easily tell the difference, but same handle shape and will fit the same sheaths.
We also have a "production Mule Team" in the works that we'll keep in stock all of the time. Same handle, slightly different spine (a bit more straight) to easily tell the difference, but same handle shape and will fit the same sheaths.
Last edited by cycleguy on Thu Jan 06, 2022 12:22 pm, edited 2 times in total.
So many knives - so little funds!!!
Re: Sal's Casual Bombshell Thread
SPY27 good grief. My 2022 list is getting longer. I really like SPY27. Well to keep it conservative, I think most of my 2022 wish list items are potential up and coming models/iterations, so we may not see all of them by 2022.
- Jeff
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
May your feet be warm and dry and your throat warm with whiskey. A knife in hand or in the sock band.
MNOSD Member #0005
-
- Member
- Posts: 1390
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: Sal's Casual Bombshell Thread
A SPY27 Mule has my attention! Would sure be a fun blade to have around.
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: Sal's Casual Bombshell Thread
I think Sal hinted at a serrated mule too. Probably the production Spy27 version
Mule Team Army 001
MNOSD 008
Stable Mules; Z-Max, Z-Wear, Magna Cut, SRS13, Rex 76, Rex T15.
MNOSD 008
Stable Mules; Z-Max, Z-Wear, Magna Cut, SRS13, Rex 76, Rex T15.
Re: Sal's Casual Bombshell Thread
Serrated mule would be interesting
-Spencer
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
Rotation:
Gayle Bradley 2 | Mantra 1 | Watu | Chaparral 1 | Dragonfly 2 Salt SE
-
- Member
- Posts: 642
- Joined: Tue Jun 27, 2017 8:32 am
- Location: Pacific Northwest
Re: Sal's Casual Bombshell Thread
Fantastic idea.cycleguy wrote: ↑Wed Jan 05, 2022 4:39 pmFrom the Mule Team Discussion forum - Poll: should mule purchases be limited to just one?
We also have a "production Mule Team" in the works that we'll keep in stock all of the time. Same handle, slightly different spine (a bit more straight) to easily tell the difference, but same handle shape and will fit the same sheaths.
Justin
-
- Member
- Posts: 557
- Joined: Thu Oct 07, 2021 3:07 am
Re: Sal's Casual Bombshell Thread
Very cool. I really like Spy27.
-
- Member
- Posts: 554
- Joined: Sun Jun 28, 2020 7:56 pm
Re: Sal's Casual Bombshell Thread
Spy27 costs too much considering it performs basically exactly like s35vn, except maybe with a bit less corrosion resistance, especially considering that s35vn is starting to be found pretty commonly at a relatively budget price. Very not excited for it to be the steel for a production mule.