Sal's Casual Bombshell Thread
- araneae
- Member
- Posts: 5492
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
sal wrote:I don't know if I mentioned that we are doing a sprint run of orange Moran drop point model. Boltaron sheath is black with our G-clip.
In house now.
Should be available very shortly. It's a run of 1200 pcs.
sal
Bomb dropped!
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
sal wrote:The production model will be fully serrated. It will be a short sprint, maybe 500-600 pcs. Black Ladybug3 (Jester) handle.
sal
From this thread: "Heard this might be considered being made soon"
Jason
FB04 Perrin BOWIE in micarta!
sal wrote:
We always appreciate input. I can speak with the maker about a Perrin Bowie proto in micarta. These are tough times and they might be interested in a short run. We probably wouldn't want to make more than 300-400.
sal
:D 5" FFG Bowie blade, micarta handle, perfect ergos :D
This would be the long awaited comeback of a knife legend! :)
All the best for you,
Manfred
Sal, thank you for giving us the FRN Stretch!
Passion is the spice in the spirit that makes excellence possible.
Sal on BF
Manfred
Sal, thank you for giving us the FRN Stretch!
Passion is the spice in the spirit that makes excellence possible.
Sal on BF
JBE wrote:From this thread: "Heard this might be considered being made soon"
sal wrote:The production model will be fully serrated. It will be a short sprint, maybe 500-600 pcs. Black Ladybug3 (Jester) handle.
sal
In reference to a hawkbill ladybug right?
Latest :spyder: -- Blurple Para2
- araneae
- Member
- Posts: 5492
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
Sal dropped a big one! Lots of good stuff in there. :) :D :)
sal wrote:Hi Rodd,
Hard to imagine who at Spyderco might tell you that? Must have been a misunderstanding.
Usually we have about 20 - 25 models "in-the-works" at any given time. They might be in engineering, or being prototyped, or being tooled, or being made in production.
All of the new models require new engineering and new tooling. Eric and I work on every model ourselves. At this time, we are working on 2010 models and some 2011 models.
New out since January
1. Bug
2. Rock Lobster
3. Jumpmaster
4. Leafstorm
5. Bob T Slipit
New still to come this year
6. Persistence
7. Chokwe
8. Bushcraft UK
9. Warrior - H1
Variants out since January
10. Temperance2 (all new tooling)
11. Manix2 (all new tooling)
12. Spyderhawk Salt - H1
13. Drop-point UK
14. Stretch2 FRN (all new tooling)
15. Sage2 RIL (all new tooling)
16. Mule Teams (2)
17. Poliwog
18. Lum Chinese folders
Variants to come out by year's end
19. Dragonfly2
20. Military Titanium RIL
21. Rescue UK
22. Walker CF "sprint" (all new tooling)
23. Baby Goddard "sprint"
24. FRN UK
There are a few more, but they might go into next year.
I would suggest that there is a great deal involved in coming out with a new model, even if it's a variant. I would also suggest that not too many knife companies are doing more in the way of new models or variants than we are.
sal
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
- The CoPilot
- Member
- Posts: 1129
- Joined: Mon May 14, 2007 5:22 pm
- Location: Lincoln, Nebraska, USA, Earth
- Contact:
News on an upcoming G-10 Native 4:
sal wrote:We're planning G-10 versions of the USA made NAtive4. The model is now in engineering. We're doing alot of research on possible ways to refine the lock interface.
Once nailed down, there will be US versions in many variations.
sal
><> The most important blood trail leads to the Cross <><
C09 CoPilots My Specialty
Integrity is Being Good Even if No One is WatchingTM
Looking for: C04 Executive plain edge, C09 CoPilot plain edge with brass liners and a G-2 marked blade
C09 CoPilots My Specialty
Integrity is Being Good Even if No One is WatchingTM
Looking for: C04 Executive plain edge, C09 CoPilot plain edge with brass liners and a G-2 marked blade
- bohica1998
- Member
- Posts: 903
- Joined: Tue Mar 31, 2009 3:42 am
- Location: Arkansas, USA, Earth
HMM, one variant left off of Sal's list: Native Forum knife! LOL!
18 's and counting so far...
Current Inventory: C14SBK Rescue SE - C14SBL Rescue SE - C14PBK Rescue FG PE - C14SBK Rescue FG SE - C10PSGRWBK Endura USN CE Emerson Opener/Black Blade - LBK3HB Ladybug Hawkbill SE - C12SGY Matriarch SE G10 modded - C78PSBK Native 3 SE - C78PBK Native 3 PE - C41SBK Native 4 SE - C41PBBK Native 4 Black Blade PE - C41PSBBK Native 4 Black Blade SE - C77PYL SpyderHawk H1 PE - C106PYL Tasman Salt PE - C122GP Tenacious SE - BY22SBK Meadowlark Hawkbill SE - LGRP3HB USN Ladybug Hawkbill PE - LGRS3HB USN Ladybug Hawkbill SE
Current Inventory: C14SBK Rescue SE - C14SBL Rescue SE - C14PBK Rescue FG PE - C14SBK Rescue FG SE - C10PSGRWBK Endura USN CE Emerson Opener/Black Blade - LBK3HB Ladybug Hawkbill SE - C12SGY Matriarch SE G10 modded - C78PSBK Native 3 SE - C78PBK Native 3 PE - C41SBK Native 4 SE - C41PBBK Native 4 Black Blade PE - C41PSBBK Native 4 Black Blade SE - C77PYL SpyderHawk H1 PE - C106PYL Tasman Salt PE - C122GP Tenacious SE - BY22SBK Meadowlark Hawkbill SE - LGRP3HB USN Ladybug Hawkbill PE - LGRS3HB USN Ladybug Hawkbill SE
-
- Member
- Posts: 6909
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
I think this one needs to go here.
sal wrote:Hi Donovan,
The goal of the Slipit line is to try to create a simple, effective, safe, useful folding knife that is socially friendly, politically correct and legal in most any situation. They are "Clip-carry, One-hand-open, Non-locking folders", although some of the smaller versions may not have clips. (bug, honeybee and grasshopper).
It began with the "UK Pen Knife" which was developed with the help of the UK knife forum called "British Blades". (A great bunch of blokes but a bit daft ), of which there are currently a number of variations.
Our next move is to offer a light weight (FRN) UK, (We are thinkng about calling the FRN version a "US Pocket Knife" rather than a "UK Pen Knife". (USPK). The UK version being higher line in G-10, carbon fiber and titanium.
I'm carrying one of the USPK's today with maroon scales. We also have blue and gray. (Plus an orange version in a serrated "Rescue" style sheepfoot). MSRP is $59.95. Steel is GIN-1.
sal
I don't believe in safe queens, only in pre-need replacements.
Here's one from bladeforums:
http://www.bladeforums.com/forums/showt ... 026&page=3Sal Glesser wrote:I just got an early TiMil RIL today. The clip is a silver Military clip. the first run will be right hand tip down and all Titan. CPM-S30V. Follow up variations will be possible. We'd like to get the first run down before we begin making changes.
We probably won't be shipping for a couple of months. We have quite a few new models hitting the streets last month and this month.
sal
Tom
__________________________________
[url]http://spydercovt.com[/URL]
__________________________________
[url]http://spydercovt.com[/URL]
Junior avatar courtesy of dialexSequimite wrote:I use knives. I collect experiences.
I'm an admirer of Spyderco's designs. Using them is like immersing yourself in music or studying a painting in a museum. I buy some "fine" art but my preference is for usable art.
- jonUSA,EARTH
- Member
- Posts: 390
- Joined: Thu Aug 27, 2009 3:19 pm
- Location: The Petrified Forest