what would a millie look life if....
-
- Member
- Posts: 2936
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Kuala Lumpur Malaysia
what would a millie look life if....
Fellow Spyderdudes...
I'm not trying to stir up any trouble or what... Just wondering what a Spyderco Military would feel and look like :
1) With almite coated aluminium handles
2) Titanium liners and scales.
3) Stainless steel handles.
4) FRN handles
5) Canvas Micarta handles
Sam
have spydies will travel
I'm not trying to stir up any trouble or what... Just wondering what a Spyderco Military would feel and look like :
1) With almite coated aluminium handles
2) Titanium liners and scales.
3) Stainless steel handles.
4) FRN handles
5) Canvas Micarta handles
Sam
have spydies will travel
-
- Member
- Posts: 2936
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Kuala Lumpur Malaysia
*hahahahahaha!!!* Dude ~ That's gonna put a hole in your wallet.. <img src="wink.gif" width=15 height=15 align=middle> I'm sure at one point or the other.. Spyderco had considered producing prototypes of the millie with the give configurations... <img src="smile.gif" width=15 height=15 align=middle>
Sam
have spydies will travel
Sam
have spydies will travel
-
- Member
- Posts: 255
- Joined: Fri Sep 24, 2004 10:33 am
- Location: USA
Sorry to be such a novice, I have a Harpy (SS) and a Calypso Jr, but my situation is that there is not a local dealer and I have to drool over Spyderco knives on the internet. My keyboard is a mess <img src="smile.gif" width=15 height=15 align=middle>
Is G10 similar to FRN in that the material forms the structure for the knife? There are no liners in my Calyso. Is a knife with G10 handles made the same way? Or is the G10 laminated to the liners or some other such thing. My next Spydie will probably be an Endura but was a $1 away from getting a Navigator last night on Ebay
TIA for your reply.
~CK
Is G10 similar to FRN in that the material forms the structure for the knife? There are no liners in my Calyso. Is a knife with G10 handles made the same way? Or is the G10 laminated to the liners or some other such thing. My next Spydie will probably be an Endura but was a $1 away from getting a Navigator last night on Ebay
TIA for your reply.
~CK
G10 isn't molded, so it just forms the scales. It's so strong though that you don't really need liners.
I recently polished the handle of one of my Militaries and it got me to thinking about how cool it would be if there was a Millie that had polished linen micarta scales. A problem though could be that micarta isn't strong or stable enough to work with the Military design. In that case, it might be cool to have a titanium handle with micarta inlays! (cue evil laughter) <img src="smile.gif" width=15 height=15 align=middle>
Edited by - cerulean on 6/23/2001 8:47:44 PM
I recently polished the handle of one of my Militaries and it got me to thinking about how cool it would be if there was a Millie that had polished linen micarta scales. A problem though could be that micarta isn't strong or stable enough to work with the Military design. In that case, it might be cool to have a titanium handle with micarta inlays! (cue evil laughter) <img src="smile.gif" width=15 height=15 align=middle>
Edited by - cerulean on 6/23/2001 8:47:44 PM
You polished the G-10 handles of your military? How did that work out? I dont think I've ever seen polished G-10.
I just got a Military, and I love it. I thought it was gonna be a bit big for me (I usually carry smaller knives) but it's great. I especially like the G-10 scales. My first knife with G-10.
--Matt
I just got a Military, and I love it. I thought it was gonna be a bit big for me (I usually carry smaller knives) but it's great. I especially like the G-10 scales. My first knife with G-10.
--Matt
Hi CalypsoKid. Welcome to the Spyderco forum.
There are many variables in knife making. the more you hang around these guys, the more you can learn. We have some very knowledgable visitors here.
Lockbacks are very forgiving with regards to twist. They can be made without liners in most materials. Most of the time we add a liner is so the clip screws can screw into metal.
Locks like linerlocks are not so forgiving to twist and usually require more rigidity. this can be done by adding dual liners, in some cases, "nesting" the liner (fitting the liner into an exactg size cutout in the inside of the scale) will provide the necessary rigidity.
G10 is made in sheets (like plywood) and the scales are cut out. FRN is injection molded into the final shape.
sal
There are many variables in knife making. the more you hang around these guys, the more you can learn. We have some very knowledgable visitors here.
Lockbacks are very forgiving with regards to twist. They can be made without liners in most materials. Most of the time we add a liner is so the clip screws can screw into metal.
Locks like linerlocks are not so forgiving to twist and usually require more rigidity. this can be done by adding dual liners, in some cases, "nesting" the liner (fitting the liner into an exactg size cutout in the inside of the scale) will provide the necessary rigidity.
G10 is made in sheets (like plywood) and the scales are cut out. FRN is injection molded into the final shape.
sal
-
- Member
- Posts: 2936
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Kuala Lumpur Malaysia
Thanks for the info, Sal! <img src="smile.gif" width=15 height=15 align=middle>
About the polished G-10: it didn't turn out too badly, but it wasn't really great either. The handle was a bit slick and it didn't seem to look as good as polished micarta. I roughened it back up with some worn 220 grit paper for a better grip.
About the polished G-10: it didn't turn out too badly, but it wasn't really great either. The handle was a bit slick and it didn't seem to look as good as polished micarta. I roughened it back up with some worn 220 grit paper for a better grip.
-
- Member
- Posts: 255
- Joined: Fri Sep 24, 2004 10:33 am
- Location: USA
Hi Ronin. The Military has one full steel liner. The pivot goes through it, the steel inserts in the back spacer go through it and the clip screws go through it. It was designed to be light and strong. At 3.9 oz (110 gms) for a tough, 4" blade folder, I would say "so far, so good". It is also stronger than many of the advertised "strong, tough , hard" knives on the market. Even our G10 is custom made to have more layers of "e-glass". G10 permits this because of it's rigidity. If we change the Mil to a compression lock, we would then have to go to dual steel liners because the lock design requires it.
There are very few knife companies, if any, that test as much as we do. We test to meet our own standards, we test the competition, we analyze steels, we do micro studies on grain structure and corrosion resistance tests. Our information does not come from the advertisers claims or even our vendors claims.
sal
There are very few knife companies, if any, that test as much as we do. We test to meet our own standards, we test the competition, we analyze steels, we do micro studies on grain structure and corrosion resistance tests. Our information does not come from the advertisers claims or even our vendors claims.
sal
-
- Member
- Posts: 2936
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Kuala Lumpur Malaysia
-
- Member
- Posts: 2936
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Kuala Lumpur Malaysia
Thanks for the scoop Poppa Spyder! <img src="smile.gif" width=15 height=15 align=middle>
I guess with the constantly evolving blade scene and Spyderco's committment to constant quality improvement, we might be able to enjoy the G-10 handles in woodlands camo, realtree, desert tan and Olive Drab other than the traditional black slabs... <img src="wink.gif" width=15 height=15 align=middle>
Sam
have spydies will travel
I guess with the constantly evolving blade scene and Spyderco's committment to constant quality improvement, we might be able to enjoy the G-10 handles in woodlands camo, realtree, desert tan and Olive Drab other than the traditional black slabs... <img src="wink.gif" width=15 height=15 align=middle>
Sam
have spydies will travel