I need some help.

Discuss Spyderco's products and history.
Post Reply
Gazza
Member
Posts: 24
Joined: Fri Sep 24, 2004 10:33 am
Location: denver, co USA

I need some help.

#1

Post by Gazza »

Does anybody with a jot singh khalsa have the blade wobble when the knife is open, there are small gaps between the blade and the liners which are natural but should my blade still move from side to side I would think the bushings should not allow this to happen. Thanks for your help.
Top
The Stare
Member
Posts: 359
Joined: Fri Sep 24, 2004 10:33 am
Location: West of Big Sky

#2

Post by The Stare »

I've no direct knowledge of the Khalsa, but no good quality knife should WOBBLE. I think if a knife has been used a great deal, particularly if it has a lockback, a tiny bit of movement, maybe the slightest WIGGLE would be acceptable. WOBBLE is no good!

Is the pivot pin tight? Can you try to adjust it? If that won't take care of it, I'd be on the horn talking to Spyderco re sending it in for service/repair. No WOBBLE! (I may make that part of my signature??)

Stare
Top
earthworm
Member
Posts: 164
Joined: Fri Sep 24, 2004 10:33 am

#3

Post by earthworm »

Mine doesn't.I think your pivot pin is worn.I had a Delica do that after several years of use & Spyderco replaced the knife NKA.Contact them.Obviously they can't replace the Khalsa but who knows?
Top
Post Reply

Return to “Spyderco General Discussion”