Endura ? Delica - update - Need input

Discuss Spyderco's products and history.
User avatar
sal
Member
Posts: 13770
Joined: Fri Sep 24, 2004 12:00 pm
Location: Golden, Colorado USA

Endura ? Delica - update - Need input

Postby sal » Fri Jul 16, 2004 12:00 am

We're working on the next update of the Endura and Delica model (new mold).



We have quite a few changes in mind.



What would you like to see?



sal

spyderwa
Member
Posts: 384
Joined: Fri Sep 24, 2004 10:33 am
Location: Tacoma USA
Contact:

Postby spyderwa » Fri Jul 16, 2004 7:10 pm

Since the Delica is one of my favorite knives I have only minor suggestions.

#1 Flat Grind blade
#2 Keep the length under 3" with a sturdier point
#3 The to keep the same thickness on the handle but have a less "sharp" feeling texture, ie. smooth out the "volcano" grip a little. Give us a deeper forward finger grip and smooth out the back end.
#4 Make the hole a little bigger like the Salt and move it forward.
#5 Give us lots of colors including clear.

Here is a pic with my ideas.

spyderwa
Rare Spyderco Page
www.angelfire.com/trek/spyderwa


Thanks Sal

User avatar
Stevie Ray
Member
Posts: 1542
Joined: Fri Sep 24, 2004 10:33 am
Location: Virginia

Postby Stevie Ray » Fri Jul 16, 2004 7:10 pm

Hmmmm.... How does one tinker with extreme success as in the case of the Delica and the Endura?? Well ... How does clips that make them ride a bit lower in your pocket like the Meercat sound .....maybe...., maybe ?? .. grinning ....

Now for my all time favorite Spydie.. the Endura .. No smaller, but make it lighter. I've got lots of your knives Sal, but somehow, the Endura remains my all time favorite. I have yet to carry a metal clip version though (I've got em, but ...). The light FRN version remains my favorite.

SR #38

User avatar
SURLY
Member
Posts: 227
Joined: Fri Sep 24, 2004 10:33 am
Location: Spyderville USA

Postby SURLY » Fri Jul 16, 2004 7:34 pm

Endura~ Don't mess with the Best

But if you must..maybe thumb grooves on top
of the blade up to the hole hump.
Leave the weight alone..really like full
serrations...Dont change it~just refine it more.(smooth out the<img src="spyder.gif" width=15 height=15 align=middle border=0> hole edges.Ti-pocket clip.

If you mess it up or cheapen your materials ,cut cost..I'll EDC a sebbie instead of my Endura...

I'd rather pay more for a Great Product!




Be @ Peace

sven
Member
Posts: 492
Joined: Fri Sep 24, 2004 10:33 am
Location: kingsburg, CA USA

Postby sven » Fri Jul 16, 2004 7:36 pm

you want to change the whaaaat? don't own a delica, but i love my endura to death. can't really thinkg of any changes i'd make... except for a ball bearing lock version perhaps... there's my $0.02

sal, thanks for using your powers for awesome....

sven

steel is unforgiving... sharp steel even more so

User avatar
CKE
Member
Posts: 3119
Joined: Fri Sep 24, 2004 10:33 am
Location: Thunder Bay ON. Canada

Postby CKE » Fri Jul 16, 2004 7:46 pm

Full flat grind on them. Bigger opening holes, if possible 14mm like the millie. Thumb ramp serrations. Better clip attachment. I really do not like the square slot the metal clip rides in. Not sure how, but I am sure I not the first to bring this up. Too mush wobble in the clip. Different colours would be cool but I don't think would be cost effective. Seems all the blues lately have had to have a black too. Personally I like the different colours<img src="smile.gif" width=15 height=15 align=middle border=0> If you can and it is cost effective go for it<img src="smile.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0><img src="smile.gif" width=15 height=15 align=middle border=0>. That is about all I can think of. Take Care.
Craig

"everything else is just a jeep"

User avatar
swede
Member
Posts: 955
Joined: Fri Sep 24, 2004 10:33 am
Location: Arizona, USA

Postby swede » Fri Jul 16, 2004 8:26 pm

I agree with Stevie Ray and SURLY...the FRN Endura is the closest to EDC perfection of any Spyderco knife. Don't mess with it too much.

Thumb grooves, at least 14mm hole and full flat grind would be nice though.

Dave

User avatar
samosaurus
Member
Posts: 1609
Joined: Fri Sep 24, 2004 10:33 am
Location: Malaysia

Postby samosaurus » Fri Jul 16, 2004 9:02 pm

Ummm... My one of my favourite <img src="spyder.gif" width=15 height=15 align=middle border=0>s! Okay, the volcano grip should be upgraded to a bi-directional textured grip like the D'Allara Rescue. I love the blade design as it is and I guess to keep production cost low so that guys like in the third world could actually afford one, not too many mods! How about a "wire" clip instead of the solid metal clothing clip? Think the Endura deserves an "evolution".. Textured ramps on the handle butt, behind the roundhole like the Native oughta make this knife very versatile in wet weather conditions.. Yeah, its flooding here in my part of the world.. Choice of colour handles - Now, OD Endura with a black blade.. Very suave! C<img src="spyder.gif" width=15 height=15 align=middle border=0><img src="spyder.gif" width=15 height=15 align=middle border=0>L! Oh well, just a coupla inputs... Thanks for listening Poppa Spyder and the Spydercrew! <img src="smile.gif" width=15 height=15 align=middle border=0>

Sam

have knives will travel...

User avatar
The Deacon
Member
Posts: 25373
Joined: Fri Sep 24, 2004 10:33 am
Location: Upstate SC, USA
Contact:

Postby The Deacon » Fri Jul 16, 2004 9:54 pm

On the blades, increase the hole diameter to 14mm, and add grooves to the thumb ramp. Bi-directional texturing on the handles, preferably the Calypso Jr. "fish scale" style, for the FRN versions. "Hollowing out" the inside surfaces of the handles on the all stainless versions to reduce weight, if economically feasible, would be nice.

Paul <A HREF='http://home.earthlink.net/~paulberetta/index.htm'>my page</A>

User avatar
J Smith
Member
Posts: 7104
Joined: Fri Sep 24, 2004 10:33 am
Location: Harriman TN USA

Postby J Smith » Fri Jul 16, 2004 10:53 pm

How about putting the hump at the pivot back on like the pre 98s had.It made the knife feel more solid.Maybe an adjustable pivot.Lugs on the spine like the Military.
Silver Spyder bug inlay would be cool.
If it is possable do a 3 screw clip like is on the Calypso Jr,this would take care of the clip well deforming if the clip is caught on something.

<img src=http://techhelpers.net/e4u/drink/trink36.gif

The Saint
Member
Posts: 117
Joined: Fri Sep 24, 2004 10:33 am
Location: Kitchener Canada

Postby The Saint » Fri Jul 16, 2004 11:36 pm

If at all possible, please make the handles G10 instead of FRN.

User avatar
dePaul
Member
Posts: 454
Joined: Fri Sep 24, 2004 10:33 am
Location: Gothenburg Sweden
Contact:

Postby dePaul » Sat Jul 17, 2004 12:30 am

Full flat grinds, larger hole. That's it.

~Paul~

Spyderco Collectors Club Member #57

User avatar
UK KEN
Member
Posts: 1531
Joined: Fri Sep 24, 2004 10:33 am
Location: Leeds. West Yorkshire

Postby UK KEN » Sat Jul 17, 2004 2:57 am

Sal

The Delica and Endura are incredible knives without any changes! I would like to see the Endura with a 4mm flat grind blade instead of 3mm. A larger opening hole for my big paws would be helpful.

A G-10 handle would be great!

But can you improve on perfection?

Regards Ken

Do not condemn the judgement of another because it differs from your own. You may both be wrong.

User avatar
DAYWALKER
Member
Posts: 6954
Joined: Fri Sep 24, 2004 10:33 am
Location: Hawaii USA

Postby DAYWALKER » Sat Jul 17, 2004 3:57 am

Aloha Sal!

Ahhhh, my ALL time <img src="spyder.gif" width=15 height=15 align=middle border=0> faves! I'd like to see full flat grind.
texturing behind the hump.
Colors...That Grey you guys are using is HOT!

I agree w/ I think JSmith said it, that extra FRN near the pivot gave it a "fuller" feel...what about moving the logo/name on a FRN half "sphere" like on the Walker Lightweight to the pivot pin? I like that "sphere" as it feels like a, *ahem*, Control knob...

God bless you on this project, I recall Alex asking my views on the "perfect" Delica...but it's hard to perfect the perfect!

Mahalo,
Chad

Proverbs 16:3...Commit YOUR works to the LORD, and YOUR plans WILL succeed!

User avatar
VultureParade
Member
Posts: 364
Joined: Fri Sep 24, 2004 10:33 am
Location: Atco, New Jersey - Camden County, South Jersey USA

Postby VultureParade » Sat Jul 17, 2004 4:01 am

How about adding the Cobra Hood feature to both?

Flat grind the blade

I think a sprint run with the compression lock or ball bearing lock would be a neat idea, give us a chance to see how they flow

-Bryan

User avatar
JBE
Member
Posts: 1531
Joined: Fri Sep 24, 2004 12:00 pm
Location: Louisiana

Postby JBE » Sat Jul 17, 2004 6:55 am

Thumb ramp grooves like the Pacific...Larger opening hole...But please, whatever ya do, keep the VG10!<img src="smile.gif" width=15 height=15 align=middle border=0>I guess ya couldn't give us a hint as to the changes ya'll got in mind?

Oh, and please no wire clip...maybe a 3-hole metal reversible like the Calypso,Jr with a little lower ride in the pocket. As far as the grips...don't change...the more aggresive patterns (like my D'Allara) are a little rough on the ol' pockets! And I like the idea of a flatter grind also with a little bit thicker blade and a fattening up of the handles (the current ones just seem a little slim for such a large knife)<img src="smile.gif" width=15 height=15 align=middle border=0>

"I'd come to realize that my job was less about saving lives then it was about bearing witness..."

Edited by - Sirenhead on 7/17/2004 12:35:05 PM

User avatar
Pyrochazm
Member
Posts: 151
Joined: Fri Sep 24, 2004 10:33 am
Location: Sumner, WA USA

Postby Pyrochazm » Sat Jul 17, 2004 6:59 am

The only possible suggestions I could think of would be:

4mm thickness blade,
lusturous black micarta (Perhaps as a sprint run)
Wire clip.

Don't fiddle too much, as you would be messing up what might be the closest thing to perfection.


"My parents dropped acid back in the sevendies in an attempt to "Expand their conciousness" and then turned around and gave me Ritalin in the nineties to supress mine"

User avatar
Pyrochazm
Member
Posts: 151
Joined: Fri Sep 24, 2004 10:33 am
Location: Sumner, WA USA

Postby Pyrochazm » Sat Jul 17, 2004 7:04 am

One more thing I forgot to mention:
An actual choil leading to the blade, kinda like the native, only less pronounced.

User avatar
king-of-mars
Member
Posts: 114
Joined: Fri Sep 24, 2004 10:33 am
Location: Los Angeles USA

Postby king-of-mars » Sat Jul 17, 2004 7:59 am

For the Endura I would suggest a flat grind for the blade, strengthen the tip, larger hole, maybe a handle kind of like the Native III for something different, or dare I say it, G-10 scales would rule!

"it is better to be hated for what you are, than to be loved for what you are not."

User avatar
chux
Member
Posts: 400
Joined: Fri Sep 24, 2004 10:33 am
Location: United Kingdom

Postby chux » Sat Jul 17, 2004 8:32 am

Thicker blade would be interesting.
G10 handles would be great, even better with a range of colours.
Larger Spyderhole.
Traction ridges like the paramillie.
No wire clip or cobra hood though.

"Better gear than good sense a traveller cannot carry."

Edit: Another call to lose the Boye dent :D

Edited by - chux on 7/17/2004 5:21:39 PM


Return to “Spyderco General Discussion”

Who is online

Users browsing this forum: Accutron, Bing [Bot], Daniel, Sharp Guy and 50 guests