THIS!!!
Swick 5 ETA?
Re: Swick 5 ETA?
Have: old S30V Native, HAP40 Endura, ZDP DF2, S110V Manix LW, Cru-wear Para 3, SE H1 DF2, S90V Native 5, K390 Urban, SE Pac Salt, P.I.T.S., XHP Manix LW, SB Caly 3, B70P, PMA11, K03, Kapara, REX 45 Military, 154CM Manix LW, Swick, AEB-L Urban, KC Cruwear Manix, M390 PM2, Mantra 2, CruCarta Shaman, M390 Manix, K390 Police 4, S90V Manix LW, Rex 45 Manix LW, 20CV Manix, Rex 45 Lil’Native, Shaman, C208GP, Cruwear Manix, Cruwear Manix, M4 Chief, Z-max!!!
Want: SPY27, K490, Swick 5.
Want: SPY27, K490, Swick 5.
Re: Swick 5 ETA?
Those scales look different than what the product photos have shown. The product photos almost look 3D printed, so it makes me wonder if the photos are just of a prototype.
-Nick
Re: Swick 5 ETA?
Thanx Mushroom.
Appreciate your support and sharing.
sal
Appreciate your support and sharing.
sal
Re: Swick 5 ETA?
How are the scales attached? It looks like they're not removable?
All SE all the time since 2017
~David
~David
Re: Swick 5 ETA?
The product page says "concealed internal pins secure a pair of peel-ply-textured scales to the handle."
https://www.spyderco.com/catalog/detail ... Large/1894
https://www.spyderco.com/catalog/detail ... Large/1894
Re: Swick 5 ETA?
Looks like all Swick 5 & 6 models will finally ship to dealers as soon as August 2022 per Spyderco byte July 2022:
“Due to unforeseen challenges, the release of the Swick 5 and 6, which were unveiled in Reveal 5 [May 5, 2020], have been delayed for quite some time. We are finally pleased to announce that initial production of the Swick 6 will be shipping in early August. We are also working hard to follow that with the Swick 5. As always, we appreciate your patience and continued interest in our products.”
“Due to unforeseen challenges, the release of the Swick 5 and 6, which were unveiled in Reveal 5 [May 5, 2020], have been delayed for quite some time. We are finally pleased to announce that initial production of the Swick 6 will be shipping in early August. We are also working hard to follow that with the Swick 5. As always, we appreciate your patience and continued interest in our products.”
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
- Buddafucco
- Member
- Posts: 3298
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: Swick 5 ETA?
•• Beau
- Buddafucco
- Member
- Posts: 3298
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: Swick 5 ETA?
Last edited by Buddafucco on Mon Aug 15, 2022 4:15 pm, edited 1 time in total.
•• Beau
- Buddafucco
- Member
- Posts: 3298
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: Swick 5 ETA?
Swick5 SpyderEdge:
KnivesShipFree... https://www.knivesshipfree.com/copy-of- ... 0n-fb14p5/
KnifeWorks... https://knifeworks.com/spyderco-fb14s5- ... ming-soon/
Southern Edges... https://southernedges.com/collections/a ... ade-fb14s5
KnivesShipFree... https://www.knivesshipfree.com/copy-of- ... 0n-fb14p5/
KnifeWorks... https://knifeworks.com/spyderco-fb14s5- ... ming-soon/
Southern Edges... https://southernedges.com/collections/a ... ade-fb14s5
Last edited by Buddafucco on Mon Aug 15, 2022 4:16 pm, edited 1 time in total.
•• Beau
Re: Swick 5 ETA?
Buddafucco wrote: ↑Fri Aug 05, 2022 2:06 pmSwick5 SpyderEdge:
KnifeWorks... https://knifeworks.com/spyderco-fb14s5- ... ming-soon/
- Buddafucco
- Member
- Posts: 3298
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: Swick 5 ETA?
I'll disappear from this thread until the next version comes along. No guarantees it'll be PlainEdge though.
•• Beau
Re: Swick 5 ETA?
Haha I'm just having some fun. I may have ordered a SE as it is Looking forward to writing an "observations" thread about this model.Buddafucco wrote: ↑Fri Aug 05, 2022 2:30 pmI'll disappear from this thread until the next version comes along. No guarantees it'll be PlainEdge though.
- Buddafucco
- Member
- Posts: 3298
- Joined: Sun Sep 29, 2019 10:20 am
- Location: Tampa Bay, USA
Re: Swick 5 ETA?
I purposefully didn't use a title that you might normally use when i made my thread. Because I'm looking forward to yours.vivi wrote: ↑Fri Aug 05, 2022 3:01 pmHaha I'm just having some fun. I may have ordered a SE as it is Looking forward to writing an "observations" thread about this model.Buddafucco wrote: ↑Fri Aug 05, 2022 2:30 pmI'll disappear from this thread until the next version comes along. No guarantees it'll be PlainEdge though.
Ok, i lied... I forgot about SFO. Our hosts should get an alert every new release. I am going to make one more Swick5 SpyderEdge alert when they show up at SFO. That is, if I'm first to see it. And then I'll go dark until the next version. Starting now.
•• Beau
Re: Swick 5 ETA?
Based on Spyderco byte July 2022, I’m assuming Swick 6 has by now shipped to dealers and we should see them soon:
“Due to unforeseen challenges, the release of the Swick 5 and 6, which were unveiled in Reveal 5 [May 5, 2020], have been delayed for quite some time. We are finally pleased to announce that initial production of the Swick 6 will be shipping in early August. We are also working hard to follow that with the Swick 5. As always, we appreciate your patience and continued interest in our products.”
“Due to unforeseen challenges, the release of the Swick 5 and 6, which were unveiled in Reveal 5 [May 5, 2020], have been delayed for quite some time. We are finally pleased to announce that initial production of the Swick 6 will be shipping in early August. We are also working hard to follow that with the Swick 5. As always, we appreciate your patience and continued interest in our products.”
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: Swick 5 ETA?
Hi Vivi---vivi wrote: ↑Fri Aug 05, 2022 3:01 pmHaha I'm just having some fun. I may have ordered a SE as it is Looking forward to writing an "observations" thread about this model.Buddafucco wrote: ↑Fri Aug 05, 2022 2:30 pmI'll disappear from this thread until the next version comes along. No guarantees it'll be PlainEdge though.
Looking forward to your "observations" on your Swick 5. Anybody else who cares to share, too.I was going to select the Swick 6 as the smaller hole appears to be the same size as other preceding models. As it is a different size than the Swick 5 and hasn't shipped yet, I'm assuming there is still an issue with the sheath. Perhaps Sal can weigh in on this.
Re: Swick 5 ETA?
I'm still holding out for PE, however long that may be. Shame I fell out of love with SE and that's the only Swick that'll be out for a while. But I carried a full SE Pacific a few days while thinking it over and I really didn't care for the cutting action vs coarse PE...
I definitely wonder why after a 2.5 year wait the SE was ready months ago but the PE are not. Hasn't been a fun wait but in the end it'll be worth it. Dream knife come true for me.
I definitely wonder why after a 2.5 year wait the SE was ready months ago but the PE are not. Hasn't been a fun wait but in the end it'll be worth it. Dream knife come true for me.
Re: Swick 5 ETA?
So how long before someone pops the scales off I wonder?
Re: Swick 5 ETA?
Only Swick5 (Large Hole) SpyderEdge was at dealers in early August 2022 in limited quantity. Still awaiting the other 3 models. Where are they?
- Swick5 Large LC200N PlainEdge Black G-10 Boltaron Sheath FB14P5 (USA) - Reveal 5 (MAY 2020)
- Swick5 Large LC200N SpyderEdge Black G-10 Boltaron Sheath FB14S5 (USA) - Reveal 5 (MAY 2020)
- Swick6 Small LC200N PlainEdge Black G-10 Boltaron Sheath FB14P6 (USA) - Reveal 5 (MAY 2020)
- Swick6 Small LC200N SpyderEdge Black G-10 Boltaron Sheath FB14S6 (USA) - Reveal 5 (MAY 2020)
- I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
- You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Re: Swick 5 ETA?
anticipation intensifies!
current fav’s: K390 SS Stretch, PM2 CruWear Mircata, P.I.T.S., Subway Bowie