Mule Screws
Mule Screws
Hi Everyone,
Could someone tell me what the size of the screws and barrel are for the halpern scales?
Thanks.
Could someone tell me what the size of the screws and barrel are for the halpern scales?
Thanks.
Re: Mule Screws
The bolts themselves are 3/16" diameter by 1/2" in length. I don't know screw dimensions, but I measure the head to be 13/64" with a T8 slot. That appears to be a normal screw size, according to the internet. I don't know the threading, but if you're buying replacements I assume you just get matching stuff.
Re: Mule Screws
Ok cool, looks like these ones then:bobartig wrote: ↑Mon Feb 27, 2023 7:24 pmThe bolts themselves are 3/16" diameter by 1/2" in length. I don't know screw dimensions, but I measure the head to be 13/64" with a T8 slot. That appears to be a normal screw size, according to the internet. I don't know the threading, but if you're buying replacements I assume you just get matching stuff.
https://usaknifemaker.com/pivot-barrel- ... bh-ss.html
Thanks for the reply!
Re: Mule Screws
I bought some 3/16" bolts + screws from knifekits recently, and the screws are considerably larger than the ones that come w/ the Halpern scales. I'm making my own handles, so I can countersink to accommodate whatever screws, but if you are buying to replace for halperns, a lot of places don't list the screw head sizes and it can be hard to know if you're getting the size you need.
Re: Mule Screws
In this thread, I give screw dimensions that work well for the Mule, and I recall the screws/nut barrels were the same as those I received with the Halperns:
viewtopic.php?f=15&t=89796
viewtopic.php?f=15&t=89796
Steel novice who self-identifies as a steel expert. Proud M.N.O.S.D. member 0003. Spydie Steels: 4V, 15V, 20CV, AEB-L, AUS6, Cru-Wear, HAP40, K294, K390, M4, Magnacut, S110V, S30V, S35VN, S45VN, SPY27, SRS13, T15, VG10, XHP, ZWear, ZDP189
Re: Mule Screws
They're 4-40 thread I believe
Re: Mule Screws
Bolster wrote: ↑Tue Feb 28, 2023 9:53 amIn this thread, I give screw dimensions that work well for the Mule, and I recall the screws/nut barrels were the same as those I received with the Halperns:
viewtopic.php?f=15&t=89796
Thanks for the info!
Re: Mule Screws
I contacted the company and they said the screw head diameter is 0.0153". That seems small, right?
Re: Mule Screws
On the G10 set of scales Spyderco provides the screw head diameter I mesured is 0.206" if that helps.
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: Mule Screws
It does, thanks. They added an extra zero, the the screws are apparently 0.153 in diameter, but that still doesn't make sense to me because the barrel is supposed to be 3/16, or 0.1875.
Re: Mule Screws
My Halperns are 4-40 , 0.195 head diameter T8 , the other screw is a knife kit , 6-32 , .246 head T10
You can see how I countersunk scale for bigger screw.
The USA knife screw size is a catalog mistake , they use the 2-56 in their smaller pivot barrels , they use 4-40 in their 3/16 barrels.
You can see how I countersunk scale for bigger screw.
The USA knife screw size is a catalog mistake , they use the 2-56 in their smaller pivot barrels , they use 4-40 in their 3/16 barrels.
Re: Mule Screws
I have been after 3/16 barrels and matching button head screws in order to try and make screw-in set of scales. I've found a supplier but it's Brisa, in Finland. I don't reckon it will be worth importing in the USA.
USA Knife Maker seems to have stuff that fits perfectly with no hassle !
They have many 3/16 barrels, the ones with 6-64 threads will fit these screws : Screw 6-64 Button Head SS .20" Thread Length Torx T10 - 10 pack
In the collection : Lots of different steels, in lots of different (and same) Spydercos.
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Robin. Finally made an IG : ramo_knives
MNOSD member 004* aka Mr. N5s
Re: Mule Screws
This is what I used from USAknifemaker.
Titanium Screw 4-40 Button Head 3/16" Thread Length T8
SKU: FKPSCW-CTS-4102
Titanium Screw 4-40 Button Head 3/16" Thread Length T8
SKU: FKPSCW-CTS-4102
Re: Mule Screws
Thanks again everyone! I ended up ordering the barrels and screws from USA knife maker, see the links below. The screw heads are slightly bigger than the holes in the halpern scales and stick out a bit but everything fits fine so no big deal. They were the only place I found that wasn't sold out of barrels and screws.
Barrels:
https://usaknifemaker.com/straight-pivo ... -pack.html
Screws:
https://usaknifemaker.com/screw-6-64-bu ... -pack.html
Barrels:
https://usaknifemaker.com/straight-pivo ... -pack.html
Screws:
https://usaknifemaker.com/screw-6-64-bu ... -pack.html