MT33P - CPM REX 76 - Limit Lifted!

A place to share your experience with our Mule Team knives.
User avatar
TazKristi
Member
Posts: 3476
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

MT33P - CPM REX 76 - Limit Lifted!

Postby TazKristi » Tue Sep 20, 2022 9:42 am

Hey, everyone! We have carefully monitored the MT33 inventory, and based on current availability, we've lifted the purchase limit.

Thank you for your interest in the Mule Team!

Kristi
There is nothing more important than this one day.

User avatar
standy99
Member
Posts: 1595
Joined: Sat Jul 22, 2017 11:07 am
Location: Between Broome and Cairns somewhere

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby standy99 » Tue Sep 20, 2022 9:44 am

Can I combine a few without extra shipping
As $45 to Australia
Im a vegetarian as technically cows are made of grass and water.

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Tue Sep 20, 2022 9:45 am

TazKristi wrote:
Tue Sep 20, 2022 9:42 am
Hey, everyone! We have carefully monitored the MT33 inventory, and based on current availability, we've lifted the purchase limit.

Thank you for your interest in the Mule Team!

Kristi
Arf, I ordered as soon as it was available ! Since I'm in France, I don't want to pay shipping twice, would it be possible to go from 2 to 3 ?
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

User avatar
TazKristi
Member
Posts: 3476
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby TazKristi » Tue Sep 20, 2022 9:50 am

We'll work out the appropriate shipping fee and issue a refund for the difference where needed. Please note your original order number on your new order (in the notes) and ask that both orders ship together. We'll do our best to take care of everyone. This is one of the challenges with an initial limit that gets lifted, so bear with us.

Kristi
There is nothing more important than this one day.

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Tue Sep 20, 2022 9:57 am

Thanks a lot. I tried to order one but now I have the "We could not verify your information or something in your information has been found to be associated with fraud. Please try again. If you are using a VPN, try turning it off to try again or contact us." warning.

Nevermind, I think the system doesn't want me to !
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

User avatar
TazKristi
Member
Posts: 3476
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby TazKristi » Tue Sep 20, 2022 10:02 am

Ramonade wrote:
Tue Sep 20, 2022 9:57 am
Thanks a lot. I tried to order one but now I have the "We could not verify your information or something in your information has been found to be associated with fraud. Please try again. If you are using a VPN, try turning it off to try again or contact us." warning.

Nevermind, I think the system doesn't want me to !
Ramonade:
I'm sorry for the challenge. I just whitelisted your account, so you should be good to go.

Kristi
There is nothing more important than this one day.

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Tue Sep 20, 2022 10:30 am

TazKristi wrote:
Tue Sep 20, 2022 10:02 am
Ramonade wrote:
Tue Sep 20, 2022 9:57 am
Thanks a lot. I tried to order one but now I have the "We could not verify your information or something in your information has been found to be associated with fraud. Please try again. If you are using a VPN, try turning it off to try again or contact us." warning.

Nevermind, I think the system doesn't want me to !
Ramonade:
I'm sorry for the challenge. I just whitelisted your account, so you should be good to go.

Kristi
that's too nice ! Sadly I made another account since I couldn't change my shipping info and other stuff like that, my new nickname (with wich I ordered the mules) is RobinH
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

User avatar
TazKristi
Member
Posts: 3476
Joined: Wed Jan 26, 2005 1:00 pm
Location: Golden, CO

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby TazKristi » Tue Sep 20, 2022 10:56 am

Ramonade wrote:
Tue Sep 20, 2022 10:30 am
TazKristi wrote:
Tue Sep 20, 2022 10:02 am
Ramonade wrote:
Tue Sep 20, 2022 9:57 am
Thanks a lot. I tried to order one but now I have the "We could not verify your information or something in your information has been found to be associated with fraud. Please try again. If you are using a VPN, try turning it off to try again or contact us." warning.

Nevermind, I think the system doesn't want me to !
Ramonade:
I'm sorry for the challenge. I just whitelisted your account, so you should be good to go.

Kristi
that's too nice ! Sadly I made another account since I couldn't change my shipping info and other stuff like that, my new nickname (with wich I ordered the mules) is RobinH
No worries. I just whitelisted your other account. :) Give it one more try if you'd like.

Make it a good day!

Kristi
There is nothing more important than this one day.

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Tue Sep 20, 2022 11:03 am

TazKristi wrote:
Tue Sep 20, 2022 10:56 am
No worries. I just whitelisted your other account. :) Give it one more try if you'd like.

Make it a good day!

Kristi
It's already a done day today, and it was a great one !
Mule n° 3 ordered, just hope they'll have the time to read the note and pack them together :D I know Mule Release days must be quite a lot of hard work !

Thanks for helping me something like 3 times in less than an hour ;)

Robin.
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

User avatar
JSumm
Member
Posts: 2990
Joined: Tue Jan 05, 2021 7:59 pm
Location: North of Atlanta, GA USA

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby JSumm » Tue Sep 20, 2022 11:22 am

I have not yet jumped into the Mule race, but I am impressed with Kristi's response during the race. Pretty impressive. Thanks for all the support Kristi!
- Jeff
Let your feet be warm & dry, and your throats warm with whiskey. A knife in hand or in the sock band.
**Current Pocket Hogs** Native Chief S30V, Caly 3.5 ZDP-189, Endura K390, CRK Inkosi S35VN
Always a Pac Salt at the ready.
MNOSD Member #0005

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Tue Sep 20, 2022 11:24 am

It's all we could have hoped for, but it's real :D
My french Spyderco AFIs are often a bit scared of ordering from the SFO, or don't want the hassle.

I'll have my sample, one to make a handle for and sell (someone wanted to book such a service), and a third one for a friend in need when the time comes ;-)
Last edited by Ramonade on Tue Sep 20, 2022 11:44 am, edited 1 time in total.
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

Burton Knut
Member
Posts: 414
Joined: Sat Mar 30, 2019 4:56 pm
Location: Knoxville, TN (LaFollette)

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Burton Knut » Tue Sep 20, 2022 11:34 am

I bought two thinking I could help someone that wasn’t able to get one. Oh well…eventually there will be a market for the spare.

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Tue Sep 20, 2022 12:49 pm

Erf, too bad they shipped my first order just now, I guess i'm gonna have a hard time getting back my money to help that hyptothetical friend :rofl :rofl
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

User avatar
defenestrate
Member
Posts: 2581
Joined: Fri Sep 24, 2004 10:33 am
Location: RTP NC area
Contact:

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby defenestrate » Tue Sep 20, 2022 5:40 pm

I got the VPN block as well, but I didn't think about it and was actually on my work VPN at the time, so I reloaded without it and was good.

Thanks for the heads up Kristi! Anyone looking for some high wear tool steels will probably love this.

User avatar
defenestrate
Member
Posts: 2581
Joined: Fri Sep 24, 2004 10:33 am
Location: RTP NC area
Contact:

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby defenestrate » Tue Sep 20, 2022 5:41 pm

I got the VPN block as well, but I didn't think about it and was actually on my work VPN at the time, so I reloaded without it and was good.

Thanks for the heads up Kristi! Anyone looking for some high wear tool steels will probably love this.

mtb
Member
Posts: 4
Joined: Tue Sep 20, 2022 5:43 pm

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby mtb » Tue Sep 20, 2022 6:32 pm

Finally got my 1st & 2nd Mule!
Thanks for lifting the limit Kristi.

User avatar
Ramonade
Member
Posts: 1814
Joined: Sun Aug 15, 2021 3:45 pm
Location: France

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Ramonade » Wed Sep 21, 2022 6:12 am

Ah, good news for you defenestrate ! I don't use any VPN sooo, it was the fact that I bought twice with a french VISA card I believe ;-)

As for my situation, I received an e-mail yesterday saying that they shipped the first order to me, but not the second. So with some luck they still grouped both orders ! What's weird is that they only mention 2 mules in the order shipping mail, instead of 3.

I guess I'll know today or tomorrow, if they make another shipment.
:respect Owned :respect : S35VN, S45VN, S30V, S90V, S110V, Rex45, 4V, M4, SPY27, MagnaCut, 20CV, M390, K390, ZDP-189, Maxamet, CTS-BD1N, CTS-XHP, SRS13, CPM154, 154CM, LC200N, VG-10, D2, 12C27(+mod), 14C28N, 420HC, Nitrox, Victorinox's steel, 440C(and others), 8cr...., the end ?

Robin
. MNOSD member 004* aka Mr. N5s :face-clouds

Michael Janich
Member
Posts: 2435
Joined: Fri Sep 24, 2004 10:33 am
Location: Longmont, CO USA
Contact:

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Michael Janich » Wed Sep 21, 2022 6:52 am

Dear mtb:

Welcome to the Spyderco Forum.

Stay safe,

Mike

mtb
Member
Posts: 4
Joined: Tue Sep 20, 2022 5:43 pm

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby mtb » Wed Sep 21, 2022 7:08 am

Michael Janich wrote:
Wed Sep 21, 2022 6:52 am
Dear mtb:

Welcome to the Spyderco Forum.

Stay safe,

Mike
Thanks for the welcome Mike!
Looking forward to trying out these Mules! :star-struck

Teddy0215
Member
Posts: 191
Joined: Wed Oct 13, 2021 5:26 pm

Re: MT33P - CPM REX 76 - Limit Lifted!

Postby Teddy0215 » Wed Sep 21, 2022 7:38 am

I’m really surprised to see these are still in stock this morning. I’m not in the market, but just letting anyone else know who may see this.
Manix 2 Lightweight, Delica 4, Titanium Squarehead, Caribbean Sheepsfoot PE, Spydiechef, Crucarta PM2, DLT Purple CruWear PM2, Red Roadie, Blue Roadie, Ronin 2, M4/natural G10 Native Chief, Rex45/burnt orange Native Chief, M4/green G10 Shaman


Return to “Mule Team Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests