MT35P - CPM MagnaCut Mule Team - Release Date

A place to share your experience with our Mule Team knives.
User avatar
RamZar
Member
Posts: 4264
Joined: Mon Aug 12, 2013 12:44 am
Location: SoCal, USA

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#61

Post by RamZar »

KenD wrote:
Tue Nov 30, 2021 6:06 pm
So, if by some miracle, one gets the complete package from Spyderco:

MT35P MagnaCut Mule Team $75.00
a set of scales (now in stock) $44.95
a sheath $30.00

Then you have spent $149.95, just .05 away from free shipping...

It’d be nice if Spyderco gave free shipping on orders of $149.95+ instead of 150.00+. After all, most knife dealers ship for free on orders of $99+.
  • I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
  • You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
Rwstubbz
Member
Posts: 84
Joined: Sat Feb 13, 2021 1:49 pm

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#62

Post by Rwstubbz »

:bug-red-white here we go again. Please no whammies. I really want this magna cut mule
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#63

Post by Evil D »

Lapel pins are like $4.
All SE all the time since 2017
~David
User avatar
Ramonade
Member
Posts: 3037
Joined: Sun Aug 15, 2021 3:45 pm
Location: NE France

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#64

Post by Ramonade »

RamZar wrote:
Mon Nov 29, 2021 1:54 am
Ramonade wrote:
Mon Nov 29, 2021 1:29 am
I have my account, I've entered billing and shipping adress and made sure they both are the same. Now, is it possible to enter my payment infos early ? I'll try to store it on the browser like advised, but I'm not really familiar with this !

You can store the full CC# information within your browser but instructions are specific to each browser / platform. An easy way around that is to copy just the CC# into the clipboard and then paste it into payment CC# upon checkout.

Here’s how to store CC# information into the Safari browser on an iPhone: Settings > Safari > AutoFill > Saved Credit Cards (iPhone security kicks in) > Add Credit Card (Use Camera or type it in).
I'd like to order before just have my credits info registered on the website but shipping would cost and pollute a lot for just an ease of payment ! I've stored it on my phone and pc browsers and if needed i can type it pretty fast.

I still hope and think we'll have some minutes to order. People should just run to the BHQ N5 LW exclusive on that same day, please ! :smirk
:respect In the collection :respect : Lots of different steels, in lots of different (and same) Spydercos.

Robin. Finally made an IG : ramo_knives

MNOSD member 004* aka Mr. N5s :face-clouds
User avatar
Crox
Member
Posts: 239
Joined: Tue Sep 14, 2021 5:20 pm

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#65

Post by Crox »

Listed as coming soon…

I’m not confident if this is new info?

https://www.spyderco.com/catalog/detail ... rade-/2223
User avatar
Crox
Member
Posts: 239
Joined: Tue Sep 14, 2021 5:20 pm

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#66

Post by Crox »

Also notice other items can’t be added to cart. Seems like something magical is happening.
User avatar
ladybug93
Member
Posts: 8014
Joined: Tue May 15, 2018 11:20 pm

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#67

Post by ladybug93 »

Crox wrote:
Wed Dec 01, 2021 10:37 am
Also notice other items can’t be added to cart. Seems like something magical is happening.
yet, somehow, the knife i was planning on purchasing along with the mule is now out of stock. :(
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
hank1984USA
Member
Posts: 3
Joined: Sun Nov 01, 2020 10:42 am

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#68

Post by hank1984USA »

I hope I'm fast enough to get one this year. I've double checked time differences and made all my arrangements ahead of time.
User avatar
Chleiti
Member
Posts: 123
Joined: Wed Mar 31, 2021 10:43 am

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#69

Post by Chleiti »

G-10 handle, Boltaron sheath, and leather sheath are all now showing in stock on the website.
User avatar
RamZar
Member
Posts: 4264
Joined: Mon Aug 12, 2013 12:44 am
Location: SoCal, USA

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#70

Post by RamZar »

Chleiti wrote:
Wed Dec 01, 2021 7:48 pm
G-10 handle, Boltaron sheath, and leather sheath are all now showing in stock on the website.

Yes and they may well be in stock minutes before MT35P goes live on Friday and you added them to your basket beforehand. What if they go out of stock when you go to check out your MT35P along with these accessories? It could delay your checking out and thus losing your chance at the MT35P.

I just added the MT scales and it says: "We have 60 Black G-10 Handle for Mule Team(s) in our inventory. You may only order 60."
  • I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
  • You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#71

Post by Evil D »

RamZar wrote:
Wed Dec 01, 2021 8:02 pm
I just added the MT scales and it says: "We have 60 Black G-10 Handle for Mule Team(s) in our inventory. You may only order 60."


I tried a few numbers and it allowed me to put all the way up to 1000 but then when I tried 2000 it updated to 56 in stock.

Screenshot_20211202-035125_Chrome.jpg
All SE all the time since 2017
~David
User avatar
RamZar
Member
Posts: 4264
Joined: Mon Aug 12, 2013 12:44 am
Location: SoCal, USA

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#72

Post by RamZar »

Evil D wrote:
Thu Dec 02, 2021 2:53 am
RamZar wrote:
Wed Dec 01, 2021 8:02 pm
I just added the MT scales and it says: "We have 60 Black G-10 Handle for Mule Team(s) in our inventory. You may only order 60."

I tried a few numbers and it allowed me to put all the way up to 1000 but then when I tried 2000 it updated to 56 in stock.


Screenshot_20211202-035125_Chrome.jpg

I did a similar scheme. So, they sold 4 in the past 7 hours.
  • I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
  • You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#73

Post by Evil D »

RamZar wrote:
Thu Dec 02, 2021 2:57 am
Evil D wrote:
Thu Dec 02, 2021 2:53 am
RamZar wrote:
Wed Dec 01, 2021 8:02 pm
I just added the MT scales and it says: "We have 60 Black G-10 Handle for Mule Team(s) in our inventory. You may only order 60."

I tried a few numbers and it allowed me to put all the way up to 1000 but then when I tried 2000 it updated to 56 in stock.


Screenshot_20211202-035125_Chrome.jpg

I did a similar scheme. So, they sold 4 in the past 7 hours.


Yep and one set of scales and a sheeth are heading my way 😁


I hate to make two orders and pay for shipping twice but I bet those sell out before the mules do, I'll eventually make a custom handle and sheath but I plan to start using this immediately and I need a reliable carry method right from the start.
All SE all the time since 2017
~David
User avatar
RamZar
Member
Posts: 4264
Joined: Mon Aug 12, 2013 12:44 am
Location: SoCal, USA

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#74

Post by RamZar »

Evil D wrote:
Thu Dec 02, 2021 3:26 am
RamZar wrote:
Thu Dec 02, 2021 2:57 am
Evil D wrote:
Thu Dec 02, 2021 2:53 am
RamZar wrote:
Wed Dec 01, 2021 8:02 pm
I just added the MT scales and it says: "We have 60 Black G-10 Handle for Mule Team(s) in our inventory. You may only order 60."

I tried a few numbers and it allowed me to put all the way up to 1000 but then when I tried 2000 it updated to 56 in stock.


Screenshot_20211202-035125_Chrome.jpg

I did a similar scheme. So, they sold 4 in the past 7 hours.


Yep and one set of scales and a sheeth are heading my way 😁


I hate to make two orders and pay for shipping twice but I bet those sell out before the mules do, I'll eventually make a custom handle and sheath but I plan to start using this immediately and I need a reliable carry method right from the start.

Smart choice to not jeopardize the quick purchase of the actual blade.
  • I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel
  • You can fool some of the people all of the time, and all of the people some of the time, but you cannot fool all of the people all of the time. - Abraham Lincoln
User avatar
Ramonade
Member
Posts: 3037
Joined: Sun Aug 15, 2021 3:45 pm
Location: NE France

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#75

Post by Ramonade »

With all that motivation around the MT35P, I guess we'll see dozens of reviews on the Mule Team subforum !
:respect In the collection :respect : Lots of different steels, in lots of different (and same) Spydercos.

Robin. Finally made an IG : ramo_knives

MNOSD member 004* aka Mr. N5s :face-clouds
User avatar
archangel
Member
Posts: 2372
Joined: Mon Mar 23, 2015 2:02 pm
Location: Wuppertal, Germany, Earth

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#76

Post by archangel »

I have decided not to go for it. I will get a nice big MC folder with a Spydiehole. It might take a while till they drop, but I'm used to having to wait for my moment.

To all of you: Happy MC MT Hunting Friday! Enjoy the madness! :winking-tongue
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
murphjd25
Member
Posts: 3286
Joined: Fri Feb 05, 2016 12:43 am
Location: Bothell,WA

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#77

Post by murphjd25 »

Good luck guys! I will bow out of this one!
Josh
JRinFL
Member
Posts: 6145
Joined: Wed Nov 18, 2015 10:30 am
Location: Unfashionable West End of the Galaxy (SE USA)

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#78

Post by JRinFL »

I'll attempt to get in on it, but I will not be crushed if I miss out. The daily use folders are also on the way and that's money better spent for me. Of course, that's never really stopped me...
"...it costs nothing to be polite." - Winston Churchill
“Maybe the cheese in the mousetrap is an artificially created cheaper price?” -Sal
Friends call me Jim. As do my foes.
M.N.O.S.D. 0001
User avatar
Evil D
Member
Posts: 27147
Joined: Sat Jun 26, 2010 9:48 pm
Location: Northern KY

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#79

Post by Evil D »

JRinFL wrote:
Thu Dec 02, 2021 1:04 pm
I'll attempt to get in on it, but I will not be crushed if I miss out. The daily use folders are also on the way and that's money better spent for me. Of course, that's never really stopped me...



I'm in the same boat, I just don't do much that a folder can't do (even many things that are better suited for a fixed blade) but I think after I've satisfied my curiosity and once we start seeing this steel in folders, I'm going to delegate this mule to kitchen use. I think my wife will really like it. I'll probably have a handle made up for just for her.
All SE all the time since 2017
~David
User avatar
kadinh
Member
Posts: 195
Joined: Wed Mar 03, 2010 2:05 pm

Re: MT35P - CPM MagnaCut Mule Team - Release Date

#80

Post by kadinh »

Regarding handles, Halpern has some in stock...I hope Jennifer doesn't get mad at me for posting this ;)

* don't order the tek-wood until I get my order in :D

***Natural Canvas Micarta Option 4, OD Micarta Option 4, Burlap Option 4 and Natural Canvas Micarta Option 5 are all sold out***
Opt 4 6-7-21.jpg
OPT 5 6-7-21.jpg
OPT 5 EB 6-7-21.jpg
If you’d like to place an order, provide the following via email to jennifer@halperntitanium.com

• Complete Name
• Ship to address (include phone number for international orders)
• Scale option and color (see attached photos, this is all we have)

Option 4 handles
G10: $55.00 per set and include hardware (6 screws and 3 barrel spacers)
Micarta and Tek-wood: $65.00 per set and include hardware (6 screws and 3 barrel spacers)
Option 5 handles
G10: $35.00 per set and include hardware (6 screws and 3 barrel spacers)
Micarta: $45.00 per set and include hardware (6 screws and 3 barrel spacers)

Extra hardware is $7.50 a set (handles come with needed hardware though)

US shipping is as follows:
1-3 sets $5.00
4 sets or more $10.00
International shipping is as follows:
Calculated when the order is packed up.

All orders will be processed via Paypal invoice. We’ll send an invoice and you can use that to make payment with a Paypal account or a credit card. Once notification of payment is received orders will ship in 1-3 business days and you will receive a tracking number.
You should never have to ask yourself "do i really need another knife?" The answer is obvious...
Post Reply