Just going to leave this here...
Just going to leave this here...
Stay tuned for more details next week!
There is nothing more important than this one day.
- Surfingringo
- Member
- Posts: 5824
- Joined: Sun Sep 01, 2013 2:02 pm
- Location: Costa Rica
Re: Just going to leave this here...
Excellent. I am very interested to test this steel for corrosion resistance. I know it’s not lc200n level but it looks like it should have excellent corrosion resistance and it will be interesting to me to compare it to other stainless steels I’ve tested like s30v, s90v cpm154, etc.
Re: Just going to leave this here...
dang. i want one. i just bought a chef though... i hope i can afford it when it drops.
Last edited by ladybug93 on Sat Nov 20, 2021 7:17 am, edited 1 time in total.
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
-
- Member
- Posts: 1391
- Joined: Thu Mar 25, 2021 10:06 am
- Location: Earth probably?
Re: Just going to leave this here...
Because desolate places allow us to breathe. And most people don't even know they're out of breath.
MNOSD member #0035
MNOSD member #0035
Re: Just going to leave this here...
OK! It's coming!
Re: Just going to leave this here...
Groovy!
Save a few chunks for some locking folders!
Save a few chunks for some locking folders!
-
- Member
- Posts: 5858
- Joined: Wed Jan 03, 2018 8:01 pm
- Location: Missouri, USA
Re: Just going to leave this here...
Can't wait!!!
- Connor
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
"What is a man profited, if he shall gain the whole world, and lose his own soul?"
Re: Just going to leave this here...
This will hopefully be my first mule as long as I can get one. Can't wait
All SE all the time since 2017
~David
~David
-
- Member
- Posts: 424
- Joined: Sat Mar 30, 2019 4:56 pm
- Location: Knoxville, TN (LaFollette)
Re: Just going to leave this here...
Subscribed! I hope I can actually score one though
- Manixguy@1994
- Member
- Posts: 12606
- Joined: Fri Jun 10, 2016 12:12 pm
- Location: Central Illinois
- Contact:
Re: Just going to leave this here...
I am truly wound up and ready to go ! Thank you Taz ! MG2
MNOSD 0002 / Do more than is required of you . Patton
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
Nothing makes earth so spacious as to have friends at a distance; they make the latitudes and longitudes.
Henry David Thoreau
- SpyderNut
- Member
- Posts: 8431
- Joined: Fri Sep 24, 2004 10:33 am
- Location: Hoosier Country, USA
- Contact:
Re: Just going to leave this here...
Very cool
:spyder: -Michael
"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
"...as I said before, 'the edge is a wondrous thing', [but] in all of it's qualities, it is still a ghost." - sal
-
- Member
- Posts: 557
- Joined: Thu Oct 07, 2021 3:07 am
Re: Just going to leave this here...
I’ve already bought sheaths through Spyderco. No stock on G10 handles though. Hope I’m lucky enough to snag one for me and my son! He’s 8 and now a dedicated Spyderco fan. He’s marked up the 2021 guide with his wishlist for Christmas! I’ve got him a dragonfly Damascus for his stocking… but a Magnacut Mule needs to go under the tree!
Re: Just going to leave this here...
i just went back and read larrin's article on magnacut and i don't see how this isn't a must have for everyone. i hope there are plenty of pieces to go around.
keep your knife sharp and your focus sharper.
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
current collection:
C253GBBK, C258GFBL, C101GBBK2, C11GYW, C11FWNB20CV, C101GBN15V2, C101GODFDE2, C60GGY, C149G, C189, C101GBN2, MT35, C211TI, C242CF, C217GSSF, C101BN2, C85G2, C91BBK, C142G, C122GBBK, LBK, LYL3HB, C193, C28YL2, C11ZPGYD, C41YL5, C252G, C130G, PLKIT1
spyderco steels:
CPM 20CV, CPM 15V, CTS 204P, CPM CRUWEAR, CPM S30V, N690Co, M390, CPM MagnaCut, LC200N, CTS XHP, H1, 8Cr13MoV, GIN-1, CTS BD1, VG-10, VG-10/Damascus, 440C
Re: Just going to leave this here...
Very exciting news!
Re: Just going to leave this here...
Can’t wait to set my alarms!!!
Re: Just going to leave this here...
Looking foward to trying it out! Hope they last for more than a couple minutes :)
Re: Just going to leave this here...
Exactly my thoughts. Gonna leave the MC MT for you guys - there will be folders.
Unless it will be sold at a super duper price, like the last ones. Then I might give it a shot. I'm guessing it will still be sold out in a flash.
Michael
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
48 Spydies, 44 different models, 43 different steels
.
Grail knife, still to be acquired: original Tuff by Ed Schempp Feel free to help me find one at a reasonable price...
Re: Just going to leave this here...
Waiting for your review, Lance.Surfingringo wrote: ↑Fri Nov 19, 2021 4:25 pmExcellent. I am very interested to test this steel for corrosion resistance. I know it’s not lc200n level but it looks like it should have excellent corrosion resistance and it will be interesting to me to compare it to other stainless steels I’ve tested like s30v, s90v cpm154, etc.